Отличное видео! Для начинающих очень подробно, не спеша, классно! Я любитель, - это мое хобби. Шью ключницы разных фасонов, пеналы, картхолдеры, портмоне, но не на продажу, а в подарок родным, друзьям. Я выкройку разрабатываю сам, сын заказал подобный кошелек как у Вас, только я делаю все углы закругленными, а с одной внешней стороны кошелька пришиваю накладной карман под банковскую и дисконтную карту. На этом кармане креплю две приемные части кнопок под широкий хлястик, хлястик тоже накладной широкий, под одно место для карты. Внутри, вместо трех кармашков под карты, пришиваю монетницу. Или делаю так как у Вас, но с внешней стороны монетницу под две кнопки и овальный клапан. Как желают заказчики. В комментариях кто -то спрашивал о подгонке частей кошелька. Я при выкройке делаю запас 2-3 мм. После склеивания и прошивки, делаю общую обрезку торцов и краев кошелька. Получается идеально ровно, обрезка кромки, малость полировки воском и все. Грунтовкой не мажу и краской тоже, не люблю мазню и заказчики тоже такого мнения. Кожа на торцах смотрится естественно. Кожу использую Пулл-ап Охра, всем нравится этот цвет и мне тоже, толщина кожи 1.2 -1.4мм. нитки плоские, вощеные, шириной 2,0 мм., толщиной 0,8 мм. Я подписался на Вас, в ожидании отличных видео по любимому ремеслу!
Thank you for the support, happy to hear that we can share the same hobby. Simple leather craft is good for beginners to try to get into leather working. You can use and customize the pattern as you want to match your needs. Keep up the good work!! ♥️♥️
I build this wallet with 5/6 buffalo and 2/3 veg tan. I added a glued scrap piece to the back of pocket/bill piece. This made this piece of the wallet closer to 5/6 oz rather than 2/3. There was enough room and wallet sits flat made the edges thick which looks really nice. My only issue was I thread used 1.0 mm was thread wax thread. I believe after watching the video you used .6 or .8? I only ask because my card pockets are tight as hell. I am still working on the card pockets in and I believe they will be fine. Thank you for free pattern gives me the confidence to try some different T-pockets. I saw the size leather you used in the description maybe adding leather thickness and thread size to your free pattern will help others build this.
Hi, Yes i use .6mm thread and 3mm guide line from the edge. it might be the leather that you use is too thick and so its make the pocket too tight. Thank you for watching, your suggestions and for using my pattern :D
@ thank you for responding. I did skive all t-pockets to the 1mm. I did stitch the t-pockets with the 1mm wax thread so I can see how that would make it sit up a bit plus close the distance on the edge. Still I really enjoyed building this wallet. It’s set up really well whether you tried that or not anyone could really attempt this and be successful.
I have been having problems with my printer printing proper sized patterns. I have printed fit to page and 100%, and they seem too small. What are the measurements for the pieces?
Отличное видео! Для начинающих очень подробно, не спеша, классно!
Я любитель, - это мое хобби. Шью ключницы разных фасонов, пеналы, картхолдеры, портмоне, но не на продажу, а в подарок родным, друзьям. Я выкройку разрабатываю сам, сын заказал подобный кошелек как у Вас, только я делаю все углы закругленными, а с одной внешней стороны кошелька пришиваю накладной карман под банковскую и дисконтную карту. На этом кармане креплю две приемные части кнопок под широкий хлястик, хлястик тоже накладной широкий, под одно место для карты. Внутри, вместо трех кармашков под карты, пришиваю монетницу. Или делаю так как у Вас, но с внешней стороны монетницу под две кнопки и овальный клапан. Как желают заказчики. В комментариях кто -то спрашивал о подгонке частей кошелька. Я при выкройке делаю запас 2-3 мм. После склеивания и прошивки, делаю общую обрезку торцов и краев кошелька. Получается идеально ровно, обрезка кромки, малость полировки воском и все. Грунтовкой не мажу и краской тоже, не люблю мазню и заказчики тоже такого мнения. Кожа на торцах смотрится естественно. Кожу использую Пулл-ап Охра, всем нравится этот цвет и мне тоже, толщина кожи 1.2 -1.4мм. нитки плоские, вощеные, шириной 2,0 мм., толщиной 0,8 мм.
Я подписался на Вас, в ожидании отличных видео по любимому ремеслу!
Thank you for the support, happy to hear that we can share the same hobby. Simple leather craft is good for beginners to try to get into leather working. You can use and customize the pattern as you want to match your needs. Keep up the good work!! ♥️♥️
@LeatheryCo Спасибо за пожелания! Удачи Вам в жизни и нашем общем хобби!
Хорошего Нового года Вам и вашим близким!
С приветом из Курска.
1st
I had to put that there. Great video, it is definitely ASMR, I got sleepy. Thanks for the free pattern.
Thank you for your support, glad you like the video. Cheers :D
I build this wallet with 5/6 buffalo and 2/3 veg tan. I added a glued scrap piece to the back of pocket/bill piece. This made this piece of the wallet closer to 5/6 oz rather than 2/3. There was enough room and wallet sits flat made the edges thick which looks really nice. My only issue was I thread used 1.0 mm was thread wax thread. I believe after watching the video you used .6 or .8? I only ask because my card pockets are tight as hell. I am still working on the card pockets in and I believe they will be fine. Thank you for free pattern gives me the confidence to try some different T-pockets. I saw the size leather you used in the description maybe adding leather thickness and thread size to your free pattern will help others build this.
Hi, Yes i use .6mm thread and 3mm guide line from the edge. it might be the leather that you use is too thick and so its make the pocket too tight. Thank you for watching, your suggestions and for using my pattern :D
@ thank you for responding. I did skive all t-pockets to the 1mm. I did stitch the t-pockets with the 1mm wax thread so I can see how that would make it sit up a bit plus close the distance on the edge. Still I really enjoyed building this wallet. It’s set up really well whether you tried that or not anyone could really attempt this and be successful.
yeaa, thicker thread will also make the pocket smaller. Again thank you for making this wallet.
Bravo , very good work .
Thankyou for watching!!
Making one this week
sounds good, thank you for watching :D
Watch the thread size it’s not 1.0 mm thread. My pockets aren’t letting cards slide has to be the thread size.
can i use your patterns to make products to sell?
I appreciate you for asking, and yes you can. Thank you for asking
Is that 3.85mm pricking iron?
yes i use 3.85mm franch pricking irons. Thankyou for watching :)
You have previously drilled and connected the two pieces. What method should we follow to align them?
is this printout working with a4?
Yes the pattern is A4 paper. Thankyou for watching :)
good video to companying me to sleep bro
Glad you enjoyed it, Thank you as always for supporting the channel :D
Can you teach me how to do a French seam by hand without a sewing vice?
Keep going bro shin
thank you for watching shin, appreciate the support 😁
@@LeatheryCo Lmk when I can buy Passport cover bro
will do bro, ill let u know
Can I use this pattern to make and sell products like this? I am located in Canada.
I appreciate you for asking, and yes you can use it as you will. Thank you for watching :D
I have been having problems with my printer printing proper sized patterns. I have printed fit to page and 100%, and they seem too small. What are the measurements for the pieces?
hii, its 11cm x 9cm when closed. Thank you for watching :D
You should try to print with “actual size” mate.
You should print with scale : 100%
Las medidas?
hii, its 11cm x 9cm when closed. Thank you for watching :)