Darion Akins My 6Ah battery on my Makita impact driver can last through all those spacers. I only suggested that because it appears that they're away from a location where they might air tools
HenryMania You have a good imagination. Listen you idiot- my 6Ah Makita battery can last through all those spacers. 6Ah is a big battery. Plus you can always switch batteries midway IF needed- duh! I only suggested battery-powered because they might not have air tools on hand, since not in a garage.
@@garrettchapman8170 You and me both bro. I miss the old days when it wasn't all about a paycheck and stabbing all of your best friends that you grew up with in the back over money. When Onion actually cared about drifting and he first built Rollintwinturbo. I just miss the old days when it wasn't all about greed and the almighty dollar. It was really nice to see Cam back behind the camera again.
I had 1.5” spacers on the front of my 2011 Ranger XLT Supercab for the 1994 Cobra wheels but the steering pulled wildly to the left when braking so I removed them after a day. I put those spacers on the back of my Toro 522xi garden tractor. I have videos of both.
"my channel was built on slightly cringe" no your channel was built on haggard garage and the people who helped you make that possible . dont forget it.
I have a 98 toyota camry and i want my tires to go a little past the fender, i have stock rims and tires currently, can that be done with my current set up, is there a space that pushes 3 to 4 inches that i can use?
These young guys are impressive.. they are most knowledgable and on top of that talented drivers.. I wonder at what age did they start driving and learning about cars!?!
I wouldn’t recommend it. If they take it to a car meet filled with ricers... Streets will be filled with cars taking 2 lanes and broken shit littering the roads “Not to mention less Walmart parking spaces”
@@boxbreakracing I dont know all the details, dont think anyone does, but from the countless videos on the subject is was basically like haggard garage started out and got big. OD was running all the shit behind the scenes, like editing, paying bills, etc. Then as the channel grew he started to get a little more shady with things, ALLEGEDLY, and started pocketed more money/shifted the channel to his instead of everyone. He also did some fuck shit to ricer miata when they were in high school that added to the drama. Like I said I don;t know everything, or anywhere probably close to everything, but there are videos about haggard garage and all the drama associated with it. I dont think OD is a bad dude, I just think he did some shady shit that karma may bite him in the ass for , but we'll see. Really just don't want more skids to get caught up with a bad name IMO, cause they good people.
Lifted a head at a race a few years back had a new gasket but kept leaking put in jb weld on about 2 inches of the head at cylinder 3. Tiny burnout just for looks, staged and the guy beside us went red. That race paid to have the head fixed and a new set of slicks.
I can't believe this content sells. Props to Orion and the crew. Making people smile. I can't wait till the real fun starts. Bangin' dem gears, takin on those apexes! Unleash the real OD!
You got to be careful with stuff like this. You do something playing around, a bunch of people see it and it ends up kicking off the next Automotive craze!! A month from now you're going to start seeing cars like this pop up all over the net
@@CarGuy87 lol, fair enough!! Some of these warning labels though.. I think, what the hell happened that caused a company to put this particular warning on a product?? There is some good ones out there
This car stock weights about 2700 lbs. That's 675 lbs per wheel. If the wheel has five studs, that's 135 lbs per stud. If the studs are M12 x 1.25 grade 12.9, the average shear stress is around 10000 psi. Given that the rough area of an M12 is 0.175 squared inches. The shear stress on each bolt while the car is stationary is about 771 psi. This number is nowhere near the max strength of 10000 psi, so there was no need to think that the studs would break as soon as you lowered the car.
That’s not how it works in the real world; purely for starters I can tell you that there is not an even amount of weight distribution on all 4 corners... Secondly, the wheel studs themselves aren’t the only potential point of failure Your math isn’t incorrect, just incomplete.
lol dude, wheel studs are in tension from the lug nut threads pulling on the stud threads. Not shear. And moving the wheel farther and farther out turns that stack of spacers into a fatass lever, multiplying the stress on each stud.
ALSO ALSO, if you guys wanna play content cop on the whole whistlin diesel thing, he made a video about driving on just rims, a video we made before he did. it's not a big deal though... like at all. chill
I say you guys should see if the 240 could handle snow like his Duramax! throw some all terrain tires on it with those spacers and just go to town! Haha
More skids damn dude I'm sorry they shouldn't be getting pissed about it you didn't say I'm copying anyone it was a really good video still could done a burn out anyways you guys didn't copy anyone you guys thought it was cool and it was
@@westboost Lmao I know those 4 turbos are ineffective af, just because they're probably not even achieving full boost, but you never know. They're fairly small turbos.
Check this out !! We made a MOPED powered CAR : ua-cam.com/video/MS4itA1dSjA/v-deo.html
No body cares
-6 points for no burnout with the spacers on.
Thanks for saying this I didn't waste my time going through the video 😂
Awww how is Hufflepuff gonna win this year?
the dislikes speak for themselves
For some reason, the very second I saw the spacers my first thought was “do a burnout
Removed my like 👍
You can change the brake pads without taking the wheel of now lol
Yeah but you take a entire dildo-looking contraption off
Pc Master no you don’t
@@Tracy_Grimshaw yes i do
@@jeffzkiller3590 brah no u dont
@@lilej8996 yes you do. To change the rotor, yeah. But the pads? Nah. Take nothing off xD
Wtf you didn't drive it or anything. That's lame.
This whole channel is lame
Actually they did at 6:17
@@Jeremy.Bearemy barely
I mean like on the road or track or more than a few feet
Yeah wtf
5 ad's in a 10minute clip... this is worse then actual tv now lol..
adblocker
Gotta pay for all those spacers somehow
Do you know AdBlock ? :3
UA-cam Premium
Didnt see any but i dont have an adblocker
You should put that many spacers on all four tires 💀
Or at LEAST evenly distributed them after trying all of them on the one wheel like that. Come on guys :P
And give it a widebody kit. :P
@@savagesock3598 you might as well just make some time attack fiberglass fenders
Right? Why just put it on one
Check Garage 54 video
These widebody kits are getting out of hand lately.
I’m sure the spacers are fine but the stress it puts on your suspension and frames is probably unreal. I wanna see you guys do it on both front wheels
Aka I know it’s fucking up your car but do it again💀
5:07 thank me later
I'll thank you right now
Took me right to an ad
No
thanks! Allways looking comment like this in long videos
Game On22 you the real MVP
*Scotty Killmer is shaking in his boots right now*
What is Bob Page doing ?
Who
Rev up your engines
Lol
I can't stand him
Time to invest in a battery powered impact driver.
man i love impact drivers
It'd be dead by the third spacer...lol need an air compressor impact
Plot twist: they had one but it died because morons like you keep recommending them
Darion Akins My 6Ah battery on my Makita impact driver can last through all those spacers. I only suggested that because it appears that they're away from a location where they might air tools
HenryMania You have a good imagination. Listen you idiot- my 6Ah Makita battery can last through all those spacers. 6Ah is a big battery. Plus you can always switch batteries midway IF needed- duh! I only suggested battery-powered because they might not have air tools on hand, since not in a garage.
Just to clear the air, the 5x4.5 hasn't been used on a jeep since 2006, the 2007 model of the Wrangler utilized a 5x5.5 lug pattern
But didn't you hear him? Its clearly for a Jeep ;)
I’ve never seen so many ads on a 10 minute video
I Have premium so I don't see ads
With 1.8 million views they must of made some decent money..
Clearly haven’t watched gta glitch videos if you think this is a lot
THAT ON ALL FOURS WOULD BE THE UNFLIPABLE CAR
I’m gonna go watch Ricer Miata, y’all want anything?
Come and pizzA
My hero
chukytheking303 An Orion that’s not money hungry ☕️☕️
Can you get me some better content than this? Thanks.. God I miss Haggard.
@@garrettchapman8170 You and me both bro. I miss the old days when it wasn't all about a paycheck and stabbing all of your best friends that you grew up with in the back over money. When Onion actually cared about drifting and he first built Rollintwinturbo. I just miss the old days when it wasn't all about greed and the almighty dollar. It was really nice to see Cam back behind the camera again.
“Thats so dangerous”
Laughs and continues lol my type of people
7:35 reminds me of lightinng mc queens kachow😂😂😂
Your hairs built on kinda cringe 😂😂😂
Lame as F!!!! , didn’t even drive the thing!!
Agreed
Actually they did at 6:17
Jeremy Deutch No they didn't
@@yahoomotherfkr5020 The wheels are spinning and the car is moving, explain to me how that is not driving a car.
Jeremy Deutch If you have to ask you won't understand
Remember when Onion had friends and made good content?, yeah me neither
*Harry Potter And The Spacer Of Wheels*
I swear I thought that It was More Skids when I clicked on the video.
Bro i love your content wouldn't think you would be here tho
Same
Same man, same
Dude I’m subbed to you love ur content bro keep it up
junior salazar k
glad there were no casualties hahahaha
Dude, why did you delete your other comment? There was nothing negative in there that I saw...
More Skids hi
I'm only here for you guys
@@RedRadar876 later!!
be careful with these lifeod guys... really cool content but apparently they have a rep for being nasty..
7:25 kachow 😭☠️
🤣
Whistlindiesel did this a month ago with his truck but 15in of spacers and 3 ft wide tires.
whistling diesel copy
oh yeah yeah
Oh yea yea
Ben Patience Yep
Like the 3rd channel to rip him off now
Whistlin diesel did it with monster meats...
That's why Onion wanted to do it, because he loves those monster meats...
And actually drove it
I had 1.5” spacers on the front of my 2011 Ranger XLT Supercab for the 1994 Cobra wheels but the steering pulled wildly to the left when braking so I removed them after a day. I put those spacers on the back of my Toro 522xi garden tractor. I have videos of both.
"my channel was built on slightly cringe" no your channel was built on haggard garage and the people who helped you make that possible . dont forget it.
7:33 KACHOW
Didn't whistlin diesel do the same thing with his Duramax truck ?
Daniel Lammey ya bet with those huge tires
Yup and I'm I'm surprised they didn't break
Yes he did
Yes and garage54 with a lada
@@poopmeat15 ya beat me to it ua-cam.com/video/ceyPHrd3OXo/v-deo.html
I have a 98 toyota camry and i want my tires to go a little past the fender, i have stock rims and tires currently, can that be done with my current set up, is there a space that pushes 3 to 4 inches that i can use?
"why so much spacer bro" lol
Look at his rolling skills, is that Alex's weed?
Let me buy 4 of those spacers. Need them for my Ranger.
Link the Duelist you’re a BRO, huh 🤣
What car is this
Answer:
*N O T* *E N O U G H*
Make all four wheels like that it’ll be a banger
bro that haircut is brutal
HAHAHAHA. hahaHAHAHAHAHAHAHAHAHAHAH NICE ONE JIMMY
I honestly can't believe they held up. I am shocked studs didn't snap. That is impressive.
These young guys are impressive.. they are most knowledgable and on top of that talented drivers.. I wonder at what age did they start driving and learning about cars!?!
Whitslin diesel has done this kinda lol
And 500,000,004 times better.
@@WTIFmyName and with less lugs 😂
You guys should put an even amount of spacers on both sides and go to a good local car meet and record reactions!! Like so Life OD can see!!!
I wouldn’t recommend it. If they take it to a car meet filled with ricers... Streets will be filled with cars taking 2 lanes and broken shit littering the roads “Not to mention less Walmart parking spaces”
Bfp
Bfp
.
Qyu s
I always wondered this since I put wheel spacers on my truck in high school! Someone finally did it!!😂😃
Your lack of comprehension of engineering principals makes this hilarious
Ikr
You taking this video seriously is hilarious.
Harry Potter has a cool car
Erma-ba-gerd he looks just like him...lmfao Complete dork, but I have to say that dude can drive...I can't fault him there.
I cant believe u didnt do a burnout on the spacers FAIL
That basically just acts like a huge lever so I'd imagine the torsion at the first spacer must be insane
"Look at his rolling skills" shit had me dead
seen this on garage 54 first.....
Terrible ....if I could take my view back I would.!!!!!
Idk if I were more skids I’d distance myself from OD. He’s got some bad karma.
Daniel Brown what’s going on with that?
How? Someone fill me in on the ☕️
@@boxbreakracing I dont know all the details, dont think anyone does, but from the countless videos on the subject is was basically like haggard garage started out and got big. OD was running all the shit behind the scenes, like editing, paying bills, etc. Then as the channel grew he started to get a little more shady with things, ALLEGEDLY, and started pocketed more money/shifted the channel to his instead of everyone. He also did some fuck shit to ricer miata when they were in high school that added to the drama.
Like I said I don;t know everything, or anywhere probably close to everything, but there are videos about haggard garage and all the drama associated with it.
I dont think OD is a bad dude, I just think he did some shady shit that karma may bite him in the ass for , but we'll see. Really just don't want more skids to get caught up with a bad name IMO, cause they good people.
Daniel Brown ohhh okay. I kinda see why though, he wanted credit for his work. People never give editors credit only the car that’s being filmed
@@111dontworry HES A TERRIBLE PERSON
Random guy:Hey bro, what size spacers you running
You: yes
“Is that full lock?”
KACHOW!
What happens if you use JB Weld as a head gasket?
Been done 😆
it means u saved money,and it also means ur probably never gonna get the head off ever again lol 😂
The only way to take the head off is open the throttle... 😄
Lifted a head at a race a few years back had a new gasket but kept leaking put in jb weld on about 2 inches of the head at cylinder 3. Tiny burnout just for looks, staged and the guy beside us went red. That race paid to have the head fixed and a new set of slicks.
whistlin diesel did this ages ago
Now... if only your channel had 4x the funding... then we could have had a proper open wheel monster! Love it. Glad I sub'd!
So we not gonna talk about what the hell is going on with Orion’s hair ??? 😂
It's Onion, and he's growing a Hesher mullet...🤣🤣🤣
He's been doing it because his last Tinder thought told him that he'd look better as a complete douche.
His hair looks great
looks gay af
Omg please do that to all 4 wheels
I can't believe this content sells. Props to Orion and the crew. Making people smile. I can't wait till the real fun starts. Bangin' dem gears, takin on those apexes! Unleash the real OD!
This is definitely a perfect example of “just because you can, doesn’t mean you should”
didn't garage 54 do the same?
I think so
It’s just straight up wide no body
Don’t Worry bout it 😂😂
Yo I subscribed from Orlando madlove bro Adamlz is around the corner you both are my favorite channels along with Bigboost Alberto.👍
Bought 15 wheel spacers but not one can of belt dressing
I see onion has been watching whistlindiesel
First thought
Vid idea : welding 5 wheels together to make up 1 wheel
Andrej would need some long ass wheel studs
Lot of mega trucks work like that, they use a truck wheel welded inside a tractor wheel to use the big tractor tires
Wanna send ya boy some of those spacers? Lol
Needa one of those motorcycle side seats to the spacer lmao
whistelingdiesel did this mounths ago'
Galen Arnett was literally gonna put this
And he did full sends on it.
With combine tires
So...
With only 2 lugs a spacer 😂
You got to be careful with stuff like this. You do something playing around, a bunch of people see it and it ends up kicking off the next Automotive craze!! A month from now you're going to start seeing cars like this pop up all over the net
Remove all warning labels. Let Darwinism take care of the whole thing. 👍
@@CarGuy87 lol, fair enough!!
Some of these warning labels though.. I think, what the hell happened that caused a company to put this particular warning on a product?? There is some good ones out there
Extension..it will work only temperary..?
Haha dying at the front turning 😂
In wasting money today lol
At 5:50 Nobody is gonna be looking at those spacers, when you have that beautiful civic in the background! Dayyyyym! 😍
Watching this video I got a State Farm car insurance ad 😂
When your car goes, YEEEEEEEEET and tries to become a Testarossa. :-D
Garage 54 did almost the same
Garage 54 is the best channel like this only wish i could understand the original channel and not need the translated one
This car stock weights about 2700 lbs. That's 675 lbs per wheel. If the wheel has five studs, that's 135 lbs per stud. If the studs are M12 x 1.25 grade 12.9, the average shear stress is around 10000 psi. Given that the rough area of an M12 is 0.175 squared inches. The shear stress on each bolt while the car is stationary is about 771 psi. This number is nowhere near the max strength of 10000 psi, so there was no need to think that the studs would break as soon as you lowered the car.
tru
That’s not how it works in the real world; purely for starters I can tell you that there is not an even amount of weight distribution on all 4 corners...
Secondly, the wheel studs themselves aren’t the only potential point of failure
Your math isn’t incorrect, just incomplete.
I’m thankful that ashmeed doesn’t do stress calculations for a living. These lugs aren’t in sheer.
Did you calculate the leverage of how far its out?
lol dude, wheel studs are in tension from the lug nut threads pulling on the stud threads. Not shear. And moving the wheel farther and farther out turns that stack of spacers into a fatass lever, multiplying the stress on each stud.
Hey life OD do u still have any of those wheel spacers
What is the year make and model of that ricer lol?
Part of me hoped it would break so in three months we could watch that kid made a video about how Orion never fixed his car 😂
wtf happened to OG haggard vids?
Onion fuked bis froends so hazard Garage went wrench in the ass for everyone
Mannnnnnnnnnnn!! You guys are in outer space with all these😂😂😂😂😂😂
What of they added a wheel halfway threw the spacer setup?
ALSO ALSO, if you guys wanna play content cop on the whole whistlin diesel thing, he made a video about driving on just rims, a video we made before he did. it's not a big deal though... like at all. chill
I say you guys should see if the 240 could handle snow like his Duramax! throw some all terrain tires on it with those spacers and just go to town! Haha
Who was playing content cop I just said didn't he do the same thing just with a Duramax
@@daniellammey9571 lots of people getting pissed about it. not you specifically
More skids damn dude I'm sorry they shouldn't be getting pissed about it you didn't say I'm copying anyone it was a really good video still could done a burn out anyways you guys didn't copy anyone you guys thought it was cool and it was
Daniel Lammey Hyuck you
Waiting for the Mazda dyno results
14 whp
@@Brock_Landers
trust me more than that lol
@@westboost Lmao I know those 4 turbos are ineffective af, just because they're probably not even achieving full boost, but you never know. They're fairly small turbos.
@@Brock_Landers
it's about the "NOS" bro hahaha, BTW subscribed bro nice channel
@@westboost Thanks man. I've never had anyone comment me on my shitty channel filled with bullshit videos. I appreciate that.
Never seen a car that can do the nae nae
Lmfao when the spacers on the front wheel fully turned "KACHOW" lightning mcqueen
Yo dawg I heard u like spacers...
tofudeliveryman95 boi stance gods be like “insert video”
Literally got home saw the post for this on ig and like 2 seconds later I got the youtube notification 😑
Kaheem JA literally same
@@1234Robert5678 I was seriously just trying to remember what he called his subscribers according to homeboy. Scrans...lmfao
Can u get offset without using spacers?
All of my Mexican bro's are gonna be doing this with 100 spoke gold daytons on their 83 Regal.
Kinda weak, you guys normally do something with the car. You just kinda wasted a bunch of time
When you’re early and don’t know what to Comment🤷♀️
Just Awesome Your You're hot. MAGA
fg jf ty ig @beastsbeauty21
Just Awesome Your you been doing a lot of promotion out here.....seen you on a lot of channels and even paying for the adam22 shoutout
jacob parker Just positive vibes Just supporting U tubers giving likes where I can
Just Awesome Your yes, I've checked out your ig. I'm in NorCal. Might need to move to Bakersfield... daaamm. Was that your truck, or your BF's truck?
Where do you get your spacers I need to find cheep spacers
Ok so wheel spacers are the ones used to match up the tires with the widebody kits? If I’m wrong please correct me
Hey man can you send me 4 of those would greatly appreciate it lol
That is one very *l o n g e b o i.*
Leave me alone I need some *s p a c e r.*
I'll leave now.
Jk these puns make me *t i r e d.*
Ima like this cuz no one likes puns anymore
Ill help you and give you one, i gotchu fam
Could I buy I set of the spacers when yall are done? 🤷♂️
* buys multiple large wheel spacers *
* is surprised when there combined length is long *