Thanks for this vid, because of this I did the same to my 23 MT-10SP a couple of days ago. Its definitely a lot louder and the sound in this clip doesn't do the difference justice. Doing this mod has actually made me hold off on going down the decat and remap route so you've saved me money!! 😁👍
Attention les cables chrome et noir sont inversés, au remontage faut le chrome en haut et le noir en bas . Par contre valve ouverte vous perdez du couple en bas , il faut faire une cartographie pour récupérer du couple , poussé la zone de rupture et reduire la température de déclenchement du ventilateur, ca fera une moto mieux réglé 😉
Une question, juste avant de serré le câble comment ta fait pour pas que la valve revienne en position fermé ? Je vois que juste avant de serré elle bouge déjà plus ?🤔🤔
@@Capsulecorp01 You wont get an error code if you don't unplug the servo motor under the seat. No problem with garantee...you can always conect these cabel as they were.
Thanks for this vid, because of this I did the same to my 23 MT-10SP a couple of days ago. Its definitely a lot louder and the sound in this clip doesn't do the difference justice. Doing this mod has actually made me hold off on going down the decat and remap route so you've saved me money!! 😁👍
@@VadersDarkside Great to hear that! 😉✌️
Attention les cables chrome et noir sont inversés, au remontage faut le chrome en haut et le noir en bas . Par contre valve ouverte vous perdez du couple en bas , il faut faire une cartographie pour récupérer du couple , poussé la zone de rupture et reduire la température de déclenchement du ventilateur, ca fera une moto mieux réglé 😉
My bike has now streight pipe and it is tuned on dyno 😊😊
Look at my new videos 🤪
Une question, juste avant de serré le câble comment ta fait pour pas que la valve revienne en position fermé ? Je vois que juste avant de serré elle bouge déjà plus ?🤔🤔
@@dadson45It is clamped with a wire, it cannot be moved
Doesn't it give a default on your screen?
No it does not 😁
You will get it if you unplug your servo motor under the seat...
Is it bad for engine and performance?
No it's not. It is just for noise regulation...
@@Capsulecorp01 You wont get an error code if you don't unplug the servo motor under the seat. No problem with garantee...you can always conect these cabel as they were.
@@dominiksmotolife and why you fixed the wire cable ? Is it necessary?
@@Capsulecorp01 I fixed the valve to be fully open all the time. Wires are free.
Hi. How you done it? Removed the nut?
You remove exhaust valve but don't explain what it does?
THIS IS A BAD IDEA
It makes the bike sound better 😁
He didn't remove the valve, just set it open all the time. It's just for emissions and noise regulations, it does not mess with the engine.
@@zs4310 👍👍👍👍👍
znaci, spreman :)
Pa skoro 😁