Awesome video and that’s a very interesting precision rifle!!! We really appreciate videos that you guys put out. I’m all ears when Mr. George Banky speaks!!!
Nice rudle GREAT VIDEO.I still am.partial to you aluminum and stainless rig and Valdada Scope.Almost did not recognize you without your camo hat.Your are an awesome shooter too.
Me and my nephew are getting into long range shooting some he bought him a Savage model 112 I think single shot in 338 Lapua magnum I loaded some rounds for him and they worked great at the 1,000 yard range he was on steel at 1,000 with the loads I’m goin to be shooting my 300 Winchester magnum Remington model 770 with my loads goin through it. We will see what happens soon. Great shooting sir and a very nice rifle your shooting to GOD BLESS
What About some Details About the System you use? you've got a Tac Chassis with Magazine, but Loading single by Hand, wich means you're using Projectiles, wich won't fit into the Magazine.... in case you're not producing Barrels, wich Barrels did you modify? What Chassis du you use and what Action?
smrettpecca I will ask George these questions. As far as single feeding, I single feed all the time, even though they will fit into the magazine and feed from the mag into the barrel. When spending a LOT of time reloading and trying to get the most concentric and accurate rounds possible, I personally don’t want to jam the nose of the bullet into a feeding ramp that has the potential to cant the bullet in the case or even deform the nose ever so slightly. It may be over analyzing the situation, but eliminating as many variables as possible is what I am going to do.
smrettpecca Here is what George had as a reply. “We use Stiller, Defiance, Bat and Surgeon. Chases are Mirage made in house. Barrels are Bartline, masterpiece, lylga and most high end barrels. We use several projectiles depending on caliber”.
Did u guys realize that the dovetail on that bipod is not designed for a picatinny style male taper and that it has very little contact area . Also my valdada i just got has a uneven dovetail as well being the flat spot on fixed side before taper starts is bigger than other side. Pisses me the fck off being im a machinist . I wonder if anyone actually sells a proper size dovetail male end for this bipod or i guess i have to make one. U would think someone would be high iq by now to make a proper attachment. With little contact area u can get dig in on the aluminum due to pressure going up .
Awesome video and that’s a very interesting precision rifle!!! We really appreciate videos that you guys put out. I’m all ears when Mr. George Banky speaks!!!
Sweet rig George, Bob, and Glenn!!
Nice rudle
GREAT VIDEO.I still am.partial to you aluminum and stainless rig and Valdada Scope.Almost did not recognize you without your camo hat.Your are an awesome shooter too.
That's one heck of a rig you have there. ( ;
aadrianlee We believe everyone should have one! 😂
@@glennjames1756 I second that ( ;
innovation is amazing, nice work!
That's a beautiful rifle.
Very nice piece of gear!
Nice rifle George.
Good shooting !! more precisely, better
Remington 700 or Savage 110 ???
Me and my nephew are getting into long range shooting some he bought him a Savage model 112 I think single shot in 338 Lapua magnum I loaded some rounds for him and they worked great at the 1,000 yard range he was on steel at 1,000 with the loads I’m goin to be shooting my 300 Winchester magnum Remington model 770 with my loads goin through it. We will see what happens soon. Great shooting sir and a very nice rifle your shooting to GOD BLESS
Randle Richardson: Practice Practice Practice. Thx for watching and good luck to you.
no idea what a "structured barrel" actually is... but i'll take 2!
Go check on TIBAUSORUS REX channel, there's a full explanation on structured barrels reducing harmonics and weight at the same time...
🖖🏻🇫🇷😎🇫🇷🤪🇫🇷🖖🏻
What About some Details About the System you use? you've got a Tac Chassis with Magazine, but Loading single by Hand, wich means you're using Projectiles, wich won't fit into the Magazine.... in case you're not producing Barrels, wich Barrels did you modify? What Chassis du you use and what Action?
smrettpecca I will ask George these questions. As far as single feeding, I single feed all the time, even though they will fit into the magazine and feed from the mag into the barrel. When spending a LOT of time reloading and trying to get the most concentric and accurate rounds possible, I personally don’t want to jam the nose of the bullet into a feeding ramp that has the potential to cant the bullet in the case or even deform the nose ever so slightly. It may be over analyzing the situation, but eliminating as many variables as possible is what I am going to do.
smrettpecca Here is what George had as a reply. “We use Stiller, Defiance, Bat and Surgeon. Chases are Mirage made in house. Barrels are Bartline, masterpiece, lylga and most high end barrels. We use several projectiles depending on caliber”.
@@glennjames1756 thank you very much Glenn! :)
That is a way cool rifle
😁😁😁verygood 😀😀😀from thailand
I have a question is that a .375 shooting the 400 at 3150 or the .408 pushing the 400 at 3150. Just curious
The title of the video will answer your question. 408
What would it take to build a Cheytac on an AR/semi auto platform? Something like the Nemo Omen chambered in .375/.408 Cheytac..
Barrett makes a semi auto platform in 416 barrett, outperforms the 375/408 cheytac all day
You look and sound like George W. Bush!!!
2000 yards
TRIPLE C RANCH ?
AB RANGE
Yes it was at the “NOW CLOSED” Triple C Ranch
It's a leftie? I want one!
Wade McMahon call Mirage ULR
What rail is that?
Custom rail made by Mirage ULR
Did u guys realize that the dovetail on that bipod is not designed for a picatinny style male taper and that it has very little contact area . Also my valdada i just got has a uneven dovetail as well being the flat spot on fixed side before taper starts is bigger than other side. Pisses me the fck off being im a machinist . I wonder if anyone actually sells a proper size dovetail male end for this bipod or i guess i have to make one. U would think someone would be high iq by now to make a proper attachment. With little contact area u can get dig in on the aluminum due to pressure going up .
If I sent you a chassis ... how much would a fifle like that run....
Paul Daigle please call Mirage ULR
Aim small miss small