Це відео не доступне.
Перепрошуємо.

HOW TO: Connect a Waste Pipe to a Soil Pipe | Drainage Sales

Поділитися
Вставка
  • Опубліковано 17 сер 2024
  • Drainage Sales representative explains the different ways to connect a waste pipe to a 110mm soil pipe using a Boss Adaptor.
    Connecting a waste pipe to a 110mm soil pipe can seem like a complicated process. However, our drainage expert explains the process in a simple, easy to understand manner. Whether using a Strap Boss Adaptor, a Boss on an existing fitting or a new Boss Pipe, our expert explains exactly what needs to be done to connect the waste pipe to the soil pipe.
    Drainage Sales provide the very best in Soil and Waste systems. Our products are manufactured by Floplast, the leading and most innovative manufacturers of drainage, soil and waste, cladding and guttering systems. Our experts can give you honest and reliable advice regarding your soil and waste systems.
    To learn more about Soil and Waste Systems, visit our website. www.drainagepi...
    Drainage Sales are specialist supplier of Underground and Above Ground Drainage Systems. Our mission is to provide excellent quality drainage products at competitive prices while delivering exceptional levels of customer service.
    Subscribe to our channel for more useful information / @drainagesalespbsl
    Connect with Drainage Sales online:
    www.drainagepip...
    Facebook: / drainagesales

КОМЕНТАРІ • 46

  • @threepennypirate8529
    @threepennypirate8529 4 роки тому +2

    Excellent all I need to connect my waste pipes in one easy lesson. Thanks for you time.

  • @notnotbow
    @notnotbow Місяць тому

    Brilliant - answered all my questions!

  • @logicallogic9960
    @logicallogic9960 5 років тому +3

    Excellent concise yet effectively illustrative video.

  • @richylad
    @richylad 5 років тому +1

    thanks, just came to see how far i needed to push my waste pipe through the boss, thanks for the info, spot on.

    • @jimh4072
      @jimh4072 5 років тому

      Me too, I was not sure about how far either.

  • @nicoteen9407
    @nicoteen9407 Рік тому

    Brilliant. So concise!

  • @desgosling2876
    @desgosling2876 2 роки тому

    Thanks for all the exclllent videos.

  • @hamz3098
    @hamz3098 4 місяці тому

    Excellent job

  • @Bananas331
    @Bananas331 Рік тому

    Perfect, thanks.

  • @SuperBlackguard
    @SuperBlackguard 2 роки тому

    Nice one! very handy information,cleared a lot of things up

  • @billburr1347
    @billburr1347 7 років тому +1

    Thanks fella, much appreciated for the helpful video

  • @877cms
    @877cms 4 роки тому

    Thank you!

  • @antoniogalluccio4213
    @antoniogalluccio4213 2 роки тому +2

    If you go for the black rubber, are you meant to put in a 40mm pushfit pipe or you are allowed to push in 40 mm solvent weld pipe as well? Will if fit and is it OK by water regs?

  • @Alfapash
    @Alfapash 7 років тому +2

    great explanation, cheers.

  • @ashy1423
    @ashy1423 4 роки тому

    Thank you 👍

  • @jimreid679
    @jimreid679 7 років тому

    Very well executed Tommy couldnt have done it better myself will 20 out of ten do

  • @hassancooling8788
    @hassancooling8788 7 років тому

    bro thanks a lot of... really you solved my 100000000 problems in one videos amazing...

  • @ranveersingh-zq3hq
    @ranveersingh-zq3hq 5 років тому

    Very helpful Thenk you

  • @smalik695
    @smalik695 3 роки тому

    Very nice 👍

  • @siobhancosgrove4145
    @siobhancosgrove4145 6 років тому

    An EXCELLANT video

  • @mrtaktiks
    @mrtaktiks Рік тому

    Thanks for your work. I have unearthed my clay sewage line and wish to tap into it and add a dog waste sealed PVC pipe. Any advice. Thanks

  • @leewilliams955
    @leewilliams955 9 років тому

    Excellent explanation

  • @stevengreen4042
    @stevengreen4042 6 років тому

    Thanks, really useful

  • @whopaimon5407
    @whopaimon5407 7 років тому

    Briliant, very nice video

  • @tonyeverden
    @tonyeverden 7 років тому

    Very helpful

  • @christopherhagans4488
    @christopherhagans4488 Рік тому

    Hi Tommy I would be so great fully for help can you get a pipe that would be different size at ether end like a rubber would be more flexible i guess so say the pipe one end would be 10cm an other 6cm to fit in to mu gutter running outlet down spout many thanks

  • @frank1847
    @frank1847 8 років тому

    Brilliant ! .

  • @222vaux3
    @222vaux3 6 років тому

    Thanks

  • @stuntmanwill
    @stuntmanwill 4 роки тому

    Hi, I need to block off a boss strap hole as have got rid of the pipe going to it, is there a push fit cap that goes into the boss hole available?

  • @sahinahmod8384
    @sahinahmod8384 4 роки тому

    Hi my soil stack is internal . I was wondering if I could just replace the top half of the soil stack with a Tee joint which would allow only the top half to be showing outside , is this a good option to choose ? Or would I have to completely remove it & put it outside ?

  • @edrobens5145
    @edrobens5145 5 років тому

    Can a boss pipe have waste entry on opposite sides? Would this infringe the "no connection zone" rule for opposite entries into a soil pipe?

  • @Drifter077
    @Drifter077 3 роки тому

    How to connect drains to gutter pipe?? Thanks

  • @atommachine
    @atommachine 4 роки тому

    i have a 60 mm class c pipe from a pump do you know how i can connect it to the boss or soil pipe thanks.

  • @Cloppa2000
    @Cloppa2000 6 років тому

    I can't get my rubber boss adaptor in to the existing pipe boss. It's way too tight! Is there any way to trim the rubber boss? I dont have room to fit an extra strap boss.

  • @solefreak2
    @solefreak2 5 років тому

    Is it okay to run a boiler condensate pipe into the soil stack using the strap boss? I'm just concerned that any toilet/bath waste could potentially run up into the condensate pipe and into the boiler.

    • @S20Mike
      @S20Mike 5 років тому

      It largely depends on where your boiler is located in the waste system; if there are outlets below the level of the boiler, assuming any blockage has occurred after the last outlet, any backing up will discharge from that outlet, like your toilet pan. If the boiler sits below the other outlets, then anything backing up will fill the boiler.

    • @solefreak2
      @solefreak2 5 років тому

      @@S20Mike Boiler sits on the ground floor so below the toilet and bath etc. Is there any type of pipe that can be used that would stop water/waste from backing up into the boiler? Like a non-return valve?

  • @inthemix3013
    @inthemix3013 4 роки тому

    I have water feeding back into the toilet from the connecting pipe. It leaves a dirty brown water in the toilet every morning. Any help much sppreciated

    • @inthemix3013
      @inthemix3013 4 роки тому

      The pipe that leads to the soil cheers

  • @Spongesyellow
    @Spongesyellow 9 років тому

    Have you got a video for installing a mechanical boss pipe? We had a strap on boss...it leaked causing staining on a new ceiling....then had a mechanical boss fitted..now that's leaking! help!

  • @yoislam
    @yoislam 8 років тому

    Top man

  • @nerdimmunity7672
    @nerdimmunity7672 11 місяців тому

    My Waste pipe that goes into my soil pipe keeps getting blocked!

  • @alistairmorrish8613
    @alistairmorrish8613 6 років тому +2

    if you're solvent welding, just push the pipe straight in - DON'T GIVE IT A TWIST - that is bad practice - you break the joint as it is setting...