How to Build Night Vision Drone Pavo20 with RunCam Link Night Eagle HD - Part 2

Part 2 of my Pavo 20 build with Night Vision Camera
Showing how it comes together and everything what I needed to build it.
BetaFPV Pavo 20 kit - without a VTX
betafpv.com/pr...
Runcam Link Night Eagle HD kit - The VTX and camera.
shop.runcam.co...
Soldering iron and Solder - Preferably small one with temperature control just to make it easier.
www.amazon.com...
DJI Goggles 2/V2 or Integra
DJI.com
DJI FPV Remote controller 2.
( in my case this, if you want to use another controller like a ELRS you can. But I went with what I had )
In Part 3 I will show how to configure Betaflight so that you can connect your DJI FPV Remote 2

[@BurOnOz]

❤

[@thiagomendes9920]

In total darkness, does it work as night vision? I didn't find the infrared. I'm thinking about purchasing to locate animals at night to make hunting easier.

[@Nordic_Drone_Explorer]

Actual Total darkness then it doesn't work. You need some light, like moonlight or some Light from the Drone but just a little light does make a difference.
There are like IR spotlights for example.
Should also check your local laws on if you can use a drone for hunting. Here it's not allowed for example.
If you just want night vision then there are better options for hunting.

[@Fizz_Gerard]

Grande video!!! ❤
Ma la cam notturna si può usare anche di giorno?

[@Nordic_Drone_Explorer]

Hehe yes it works great even during the day ua-cam.com/video/L-vOpJz9mpY/v-deo.html 😉

[@kayuen6656]

I have the exact same build

[@Nordic_Drone_Explorer]

Cool 😊. Really noticed how much the LED light helps when flying in Really dark places so they work nice together.

[@Viseo3dp]

On the vtx your screws should go from the top down because the nuts you get are plastic and your vtx get very hot at times so place the nuts at the bottom of the carbon plate, just switch the way he is doing it, and i know this because i melted the nuts by having then on top.

[@Nordic_Drone_Explorer]

Good to know thanks. 😊
Need to trough all the screws anyway as the ones for the camera dropped off. Felt a bit off when the camera was just flat and was blinded by the LEDs suddenly..