Nice video, 2 tips 1st use the Loctite shower wall backer adhesive 2nd. Put painters tape on the wall next to the edge. That way when you seal the boarder with the clear locktite all the excess adhesive that comes out will get on the tape and not the wall. Good video 👏🏻👏🏻👏🏻
Put one of these up over plaster walls in a then 60 year old house. It is still holding up to this day.I also filled the molded shelves with foam, rigid foam though that I cut to slip in and glued it as a reinforcement. I picked the panels up at the restore for 20 bucks.
That is a darn good idea! I am getting ready to install a tub surround next weekend and don't really like the hollow spots in the moulding..... Did you use the foam in a can or something similar?
@michaelh7527 here’s the link to the foam. Applied it in 2 inch layers, then cut out the rest. This one is much more solid than the yellow can. www.homedepot.com/p/Loctite-TITE-FOAM-Big-Gaps-12-oz-Insulating-Foam-Sealant-2378565/305120190
@@michaelh7527 I used the solid board foam, pink stuff as that is what I had on hand. It took some time to cut and I used caulking to hold it in. If I was to do this avian I’d use spray foam and I’d look for the kind that is white latex, it doesn’t expand much but also not as rigid as the high expansion stuff but it is an easy clean up and there wouldn’t be a fear that the colour from the yellow foam could bleed through over time, just my thought on that.
Years ago I replaced a bath tube and shower surround, I think it was a lower quality material. It used a double stick sort of tape to hold the surround to the drywall. Had to redo it with adhesive. Good idea filling those shelf voids with expanded foam, it’ll keep moisture out if it cracks.
Video was very helpful. I bought a 1983 Heritage RV and the bathtub is still in good shape but the original walls were made of this same thin material and has a ton of cracks. I was looking for something inexpensive and lightweight to replace it with and it looks like what you used is exactly what I'm looking for. Thanks for the demo.
Well Done Sir! I have been in the trades (Pipe Fitter/Plumber) since the 80's. I really liked your tutoring and explanation. i have installed a ton of fixtures in my years in the trade, but never knew the method for using the adhesives, i just assumed get as much on the panels and mash them together, thank you for your knowledgeable instruction. i was suffering from sticker shock for the wife's "Honey Do It Now List!" and was considering FRP due to what the actual cost of the molded surrounds cost. i definitely will be moving forward with the FRP board.
Thanks for this video. Im needing to remove the shower walls in the place im renting a d replace them as they're coming away from the walls a d the caulking has deteriorated so much just in the year i moved in. I know my landlord likely wont do anything about it so was hoping the process would be easy and fast. This video makes me feel like i can do this quite easily with virtually no carpenty experience
Have you ever tried to install a shower wall over a wood shower wall made out of 2 x 4s. We had a tenant that decided that was a good remodel idea so he built all 3 walls out of 2 x 4s and, of course, he nailed them in. This is proving to be a real nightmare.
Thanks for the video! Great job! Do you know if there is a glue up, shower "only" wall surround for the same price point? Would love to do this for my shower. Thanks!
Yes! I actually installed one on the project I’m working on now. Here’s the link. www.homedepot.com/p/Delta-Foundations-38-in-W-x-70-63-in-H-3-Piece-Glue-Up-Corner-Shower-Wall-Surround-in-White-B69912-3838-WH/303167710
You are not supposed to use regular liquid nails, power grab or any adhesive that is not approved specifically for polystyrene... it says on the back of liquid nails and power grab that it's not approved for polystyrene.... liquid nails and loctite have products specifically for polyethylene showers
@@kevincampos1266 So even if someone is clearly right about something, then you shouldn't listen to them??? I made that comment because I literally made the same mistake and had to re do the entire shower!!!
With these panel surrounds, what is normally done if there's any work needed in the shower valve fixture? Will these basically need to be all ripped out and redone after the work is completed? Are there any options where maintenance and plumbing work can be done after the panels are installed? If there were a service access panel incorporated into these surround panels it would be easier to deal with future work, but it appears they're always designed as a single piece to be installed after all the plumbing is completed.
I watched this video just to see how to deal with the window. My homes builder put a nearly full size window in the shower. Plus the window sill is tilted inwards and catches water. 😅
The walls need to have support throughout since it’s thin and flexible. Silicone should also be used at the bottom since it will be in contact with water. Silicone is also more flexible than caulk.
I have an old tub and the tub has a lip that is right up against the stud. I was debating if I can lay the drywall directly on the tub or if I need to leave a small 1/8 gap between it and the tub. If so, won't it be more difficult to seal with the silicone? I guess I would need to slowly squeeze the silicone into the 1/8 crack? Thanks for your reply. Perry
Sheet rock that should’ve been hardy board underneath that stuff you can’t lay anything water barrier up against sheet rock it’s literally just gonna crumble and grow mold quickly
I added a description to the video of the Delta tub surround. Here’s the link as well: www.homedepot.com/p/Delta-Pro-Series-60-in-W-x-57-in-H-Five-Piece-Glue-Up-Tub-Surrounds-in-High-Gloss-White-40154/204338479
@@wazup3333 here’s the link to the shower wall Your friend has shared a link to a www.homedepot.com/p/Delta-Foundations-38-in-W-x-70-63-in-H-3-Piece-Glue-Up-Corner-Shower-Wall-Surround-in-White-B69912-3838-WH/303167710
Here’s the link to the shower wall www.homedepot.com/p/Delta-Foundations-38-in-W-x-70-63-in-H-3-Piece-Glue-Up-Corner-Shower-Wall-Surround-in-White-B69912-3838-WH/303167710
I enjoyed watching how you put everything together. We are in the process of doing our bathroom. Where you buy your inexpensive wall panel at for that price?
???? Ok ...I am doing this ... last time I used 2 separate pieces on the window side ... with a vertical trim filler strip under the window -- the window is full size -- ??? how and what did you use to cut out the faucet handles --- I have a 3 handle tub faucet I am going to use --- just like the original ... thank you in advance ...
A trim filler strip under the window will trap water which will trap mold. You can use a hole saw to cut out the faucet handles. You may be able to use scissors since the material is thin. I hope this helps.
???? Thank You in Advance for your great tutorial this is 4th time I have watched it and I am buying the products you endorse === the house is a old beach house the window is trimmed w/ redwood .75" / the exterior wall is cinderblock parged - so I will use 1/4" cement board attached w/ adhesive and screws butted up to the window trim --- ??? all the interior walls are 3/8" standard drywall - I use exterior grade paint on all interior surfaces ?? DO YOU SEE A PROBLEM - the video looks like You did the same = not green board = green board does NOT come in 3/8s ... Kudos if you answer this @@fixedbyli
@@covepoint1 I prefer to use cement board. Be sure to tape and add cement to the corners. Use the best adhesive Loctite Powegrab or the Loctite clear adhesive.
@@fixedbyli didn't see that. loctite tub surround is what I normally use I found your video searching for cheaper adhesives to use. the loctite tub surround cartridges are like $9, and I'm a cheapskate
@@cynic256 same here. I used liquid nails on the back of the panels and the expensive Loctite stuff on the edges. Still holding up. I want to do a follow up video about 1 year after the install.
question? what if you were using outdoor sheeets of white 1/2 inch plastic? and nothing else on top of it.. then could you caulk the bottom edge and slide it into a tight you made the gap in between the shower wall sides and where they will meet with the walls? and then clean the edge and apply another bead of caulk completely around the whole bottom edge of the shower pan where it meets the wall?
I’m having a hard time visualizing it. 1/2” plastic is pretty thick! You’re priority is to avoid letting the water go behind the tub - slow leak could turn into a big problem. Make sure that the walls overlap the tub. Apply a bead of “supreme silicone” (link below) where the walls and tub meet. www.homedepot.com/p/GE-Supreme-Silicone-10-1-oz-White-Kitchen-and-Bath-Caulk-2709108/100669748
Quick question… I purchased a proFlo shower base that does not have walls made for it. There is just a plastic lip. Can I use this with it? I was told I had to use tile, but it’s too expensive.
Thanks so much for the through video. My question is regarding the panel not touching the wall. Im imagining you crea the small gap by using a shim when installing. After the adhesive cures, do you fill the gap with the sealant? You said he word adhesive in the video, but I was hoping for a little more clarity on that seam.
I didn’t use shims when installing the walls. You want to make sure the shower wall fits flush against the sheetrock because the shower walls are flimsy. Also, the shower walls shouldn’t rest on top of the tub. This is where you should add 100% silicone. You want to make sure water and moisture doesn’t have a chance to climb up from behind the shower wall..
So you didn't use surround for the inside of the window well ? And is there a trim channel that caps over the surround on the corners on the market ? Thx
Yes! Use the remaining pieces of tub surround that were cut out from the window and Loctite Powergrab construction adhesive around the window. I pressed the construction adhesive out from the walls to overlap the corners. A corner trim on the outside of the window?! Too bulky/clunky for me.
Adhesive is key. Loctite tub surround is best. Check out their website here. www.loctiteproducts.com/en/products/build/construction-adhesives/power-grab/loctite_power_grabtubsurroundconstructionadhesive.html
Allow to set for 16 to 24 hours then caulk perimeter edges with Loctite 2in1 Tub & Tile sealant. Applications over ceramic tile may require up to 7 days dry time. www.homedepot.com/p/LOCTITE-Power-Grab-Express-9-oz-Tub-Surround-Construction-Adhesive-2546759/311307070
How about putting this over tile? What types of primers would I need if it is possible? And where the panels meet on the flat part of wall do I need to caulk those? I have the ugliest dam grey tile in a tiny bathroom with no window. Ugh
I promise my next shower installation will be over tile. Loctite adhesive is the best. The one referenced in this video will work well to adhere to tile. Make sure the surface is clean to ensure it adheres.
@Fixed by Li *there is grouting everywhere. Never seen that done before. Every corner & seam is grout. Is that something new? I'm no pro but i don't believe it's normal for tub seal. It's cracked and pieces missing.
If you are referring to the bath wall, here’s the link www.homedepot.com/p/Delta-Pro-Series-60-in-W-x-57-in-H-Five-Piece-Glue-Up-Tub-Surrounds-in-High-Gloss-White-40154/204338479
Oops. I think you meant pvc board. Here’s the link Your friend has shared a link to a Home Depot product they think you would be interested in seeing. www.homedepot.com/p/Veranda-3-4-in-x-5-1-2-in-x-8-ft-White-PVC-Trim-IN5416425/205725098
The window that was there was broken. I had to replace it. Because it was an odd size, the closest thing I could find was this.. Mobile Home Window 14X21... www.amazon.com/dp/B01D0JZGVA?ref=ppx_pop_mob_ap_share
Hi Li, Thanks for all your videos! I have a question. I want to replace my current tub' wall surround with a new one. I bought my house 9 years ago. The surround was already in there. It had held pretty good over the years! No complaint. When I removed the existing surround, the drywall found behind was the regular grey color sheetrock; it was in a very good condition so I think I am going to keep it, but the drywall joints were not taped or mudded. Is it necessary for the drywall and joints to be taped, and mudded, before installing the new surround?
It’s not required that you tape the edges of the Sheetrock with this plastic wall surround. However, it’s not properly sealed around ALL edges, then the moisture will penetrate and damage the Sheetrock whether or not it has tape. Hope this helps!
Hi Li, I am close to getting ready to install the surround. I prepped my grey drywall with mud to make it as smooth as possible by sanding. Is it necessary for this type of install and for a nice finish to have the walls perfectly plumb, square and even? It's an old house and nothing is perfectly square.
It’s not required if it’s sealed correctly. If not, the Sheetrock will soften and fall apart. Think of this plastic dubbing as a thick schluter membrane.
@@fixedbyli Hi Li, I believe you already answered my first question. The most recent one was about, do the walls and drywall need to be plumb and square, and also smooth and flat. I read somewhere that all irregularities under the surround will show.
Delta pro wall surround. Here a link: www.homedepot.com/p/Delta-Pro-Series-60-in-W-x-57-in-H-Five-Piece-Glue-Up-Tub-Surrounds-in-High-Gloss-White-40154/204338479
Here’s the link to Home Depot. Yes. It’s still $99.. www.homedepot.com/p/Delta-Pro-Series-60-in-W-x-57-in-H-Five-Piece-Glue-Up-Tub-Surrounds-in-High-Gloss-White-40154/204338479
Do you like I can appreciate doing things on the fly on the cheap and doing what you Gotta do to get it done but this is got to be temporary this is opening up a family to some serious risks that won’t be known until it’s obvious everybody’s sick mold will grow behind walls quickly and easily throughout that entire bathroom and you won’t even know it on the other side of that wall Sheet rock regardless if it’s painted is not waterproof or water resistant whatsoever I wouldn’t doubt if there’s already mold growing either underneath or behind that shower wall what a nightmare black mold is one of the most serious problems that America is just now beginning to wake up to the builders that don’t know what they’re doing and especially those who are working on bathrooms with water should definitely understand how important hardy board is
I would never install that crap in my house. The amount of work getting your walls perfectly flat and square would be insane. You might as well tile if you are going to put that much work into it.
Nice video, 2 tips 1st use the Loctite shower wall backer adhesive 2nd. Put painters tape on the wall next to the edge. That way when you seal the boarder with the clear locktite all the excess adhesive that comes out will get on the tape and not the wall.
Good video 👏🏻👏🏻👏🏻
Thanks! Liquid nails worked! I will post a video update on a tear down. I agree to adhere to the recommended materials.
I had never done this before. This video alone gave me the confidence to try it and I had no issues!
Put one of these up over plaster walls in a then 60 year old house. It is still holding up to this day.I also filled the molded shelves with foam, rigid foam though that I cut to slip in and glued it as a reinforcement. I picked the panels up at the restore for 20 bucks.
Glad there’s other people out there with common sense!! The one I installed is still holding up!
That is a darn good idea! I am getting ready to install a tub surround next weekend and don't really like the hollow spots in the moulding..... Did you use the foam in a can or something similar?
@michaelh7527 here’s the link to the foam. Applied it in 2 inch layers, then cut out the rest. This one is much more solid than the yellow can.
www.homedepot.com/p/Loctite-TITE-FOAM-Big-Gaps-12-oz-Insulating-Foam-Sealant-2378565/305120190
@@michaelh7527 I used the solid board foam, pink stuff as that is what I had on hand. It took some time to cut and I used caulking to hold it in. If I was to do this avian I’d use spray foam and I’d look for the kind that is white latex, it doesn’t expand much but also not as rigid as the high expansion stuff but it is an easy clean up and there wouldn’t be a fear that the colour from the yellow foam could bleed through over time, just my thought on that.
Years ago I replaced a bath tube and shower surround, I think it was a lower quality material. It used a double stick sort of tape to hold the surround to the drywall. Had to redo it with adhesive.
Good idea filling those shelf voids with expanded foam, it’ll keep moisture out if it cracks.
I recommend this for the shelves.
Loctite Tite Foam Gaps & Cracks White Insulating Foam Sealant 12 fl oz, 1 Can a.co/d/922if3R
I wear latex gloves whenever working with an an adhesive. Great technique using the 2 products.
Video was very helpful. I bought a 1983 Heritage RV and the bathtub is still in good shape but the original walls were made of this same thin material and has a ton of cracks. I was looking for something inexpensive and lightweight to replace it with and it looks like what you used is exactly what I'm looking for. Thanks for the demo.
Great video. Should have thousands of views. Thank you for your patience and thoroughness for us DYIs.
Yes!
Thanks! Comments like yours keep me going! The more comments/subscribers the better the content!
Looks really good. Actually it looks great for that price point. God bless you and your.
thanks for taking the time to share this. I have to put off a bathroom remodel and this is just the stopgap measure I was hoping to find.
Well Done Sir! I have been in the trades (Pipe Fitter/Plumber) since the 80's. I really liked your tutoring and explanation. i have installed a ton of fixtures in my years in the trade, but never knew the method for using the adhesives, i just assumed get as much on the panels and mash them together, thank you for your knowledgeable instruction. i was suffering from sticker shock for the wife's "Honey Do It Now List!" and was considering FRP due to what the actual cost of the molded surrounds cost. i definitely will be moving forward with the FRP board.
Got me thinking I can do this 🤔.
My husband is gonna be sick of me next weekend 😂.
Thanks for this video. Im needing to remove the shower walls in the place im renting a d replace them as they're coming away from the walls a d the caulking has deteriorated so much just in the year i moved in. I know my landlord likely wont do anything about it so was hoping the process would be easy and fast. This video makes me feel like i can do this quite easily with virtually no carpenty experience
Wow, I wish everyone was as precise as you. Fantastic!
Love this video , you totally addressed a project I need to do in my own home !! Thank you..
thats awesome u help me a lot with this video and very well explaining everything by details
Have you ever tried to install a shower wall over a wood shower wall made out of 2 x 4s. We had a tenant that decided that was a good remodel idea so he built all 3 walls out of 2 x 4s and, of course, he nailed them in. This is proving to be a real nightmare.
There are some showers that could be installed directly to the stud (wood). You can’t do that with this one.
Green drywall over the studs.. then glue on your surround
@@reggieanderson885green board is not for inside shower. It's water resistant, not waterproof.
@@aliengranpa thats true. Thats why the surround will be covering it
Thanks for the video! Great job! Do you know if there is a glue up, shower "only" wall surround for the same price point? Would love to do this for my shower. Thanks!
Yes! I actually installed one on the project I’m working on now. Here’s the link.
www.homedepot.com/p/Delta-Foundations-38-in-W-x-70-63-in-H-3-Piece-Glue-Up-Corner-Shower-Wall-Surround-in-White-B69912-3838-WH/303167710
You are not supposed to use regular liquid nails, power grab or any adhesive that is not approved specifically for polystyrene... it says on the back of liquid nails and power grab that it's not approved for polystyrene.... liquid nails and loctite have products specifically for polyethylene showers
Thanks! See the updates in the description. The item you are referring to is Loctite Tub Surround.
@@fixedbyli dont listen what people say they dont pay you or tell what to do you do you!
Are u special? It's to make sure the product is good for the customer@@kevincampos1266
But did you do it for 99$? 😂
@@kevincampos1266 So even if someone is clearly right about something, then you shouldn't listen to them??? I made that comment because I literally made the same mistake and had to re do the entire shower!!!
With these panel surrounds, what is normally done if there's any work needed in the shower valve fixture? Will these basically need to be all ripped out and redone after the work is completed?
Are there any options where maintenance and plumbing work can be done after the panels are installed?
If there were a service access panel incorporated into these surround panels it would be easier to deal with future work, but it appears they're always designed as a single piece to be installed after all the plumbing is completed.
you can put this onto regular dry wall without any waterproofing?
Great idea. Now buy question is: Have you found a product of a bit more quality but similar principles?, Thanks
Great question! Not yet. Direct to stud wall surround is the next option. As flimsy as this is, what you place it over is what provides support.
I want to see the total installation of the window side. That's the most difficult part.
On my to do list!
I watched this video just to see how to deal with the window. My homes builder put a nearly full size window in the shower. Plus the window sill is tilted inwards and catches water. 😅
Where did you get the shower wall material? And what is the name of it.
Any tip on keeping the bottom steady? Since it’s flexible, it causes the caulk to go bad quick
The walls need to have support throughout since it’s thin and flexible. Silicone should also be used at the bottom since it will be in contact with water. Silicone is also more flexible than caulk.
I have an old tub and the tub has a lip that is right up against the stud. I was debating if I can lay the drywall directly on the tub or if I need to leave a small 1/8 gap between it and the tub. If so, won't it be more difficult to seal with the silicone? I guess I would need to slowly squeeze the silicone into the 1/8 crack?
Thanks for your reply.
Perry
Sheet rock that should’ve been hardy board underneath that stuff you can’t lay anything water barrier up against sheet rock it’s literally just gonna crumble and grow mold quickly
He meant green board
Also called cement board. All depends on where you live. Never heard of Hardy board until I moved to Montana, in California we called it cement board.
Purple board drywall
Thanks for the video. ❤
Good video BJ
Great video just what I needed
You do great work man!! Thank you for the video!!
Awesome man! I just try to focus on stuff that you doesn’t exist
How do you take them off with destroying the walls?
Good Content here. Covering the basics well but not going into needless detail. Thanks
Thank you. Can I do this over existing ceramic tile?
Q2- do they come with patterns
Yes! You can! I started converting my rentals. So.. No need to remove pre-existing tiles.
Q2. They do come in patterns, but.. it’s 4x-5x the cost!
Went up to $130 now 😬
Can we use this for tile around the bathroom or do you recommend something else?
Thank you so much it was actually what I needed to install that shower shell correctly.
Where do you buy the $99 shower wall and what did you use to finish the edge of the walls?
I added a description to the video of the Delta tub surround. Here’s the link as well:
www.homedepot.com/p/Delta-Pro-Series-60-in-W-x-57-in-H-Five-Piece-Glue-Up-Tub-Surrounds-in-High-Gloss-White-40154/204338479
@@fixedbyli is there anything higher for shower pan instead of tub
@@wazup3333 here’s the link to the shower wall
Your friend has shared a link to a
www.homedepot.com/p/Delta-Foundations-38-in-W-x-70-63-in-H-3-Piece-Glue-Up-Corner-Shower-Wall-Surround-in-White-B69912-3838-WH/303167710
Here’s the link to the shower wall www.homedepot.com/p/Delta-Foundations-38-in-W-x-70-63-in-H-3-Piece-Glue-Up-Corner-Shower-Wall-Surround-in-White-B69912-3838-WH/303167710
@@fixedbyli hi thanks but when I click the link it's not working ?
I enjoyed watching how you put everything together.
We are in the process of doing our bathroom.
Where you buy your inexpensive wall panel at for that price?
Home Depot. Link in the description.
This was good want to see finished project
Yes! Not sure if this works, but here’s a link to a full walk through!!
share.icloud.com/photos/025ZVBziVPDREF4R7HCJwHZMw
Great job!
Thanks!
Where did you find the trim for the surround ? I have a similar tub but no trim
Can this same application be used on vinyl on gypsum walls (manufactured home)
dein sheetrock can get soft tho might push a hole thru the whole thing?
just a fyi glues break down over time when in a moist environment. hope it works out for you
Thanks Josh! Recommendations?
Can you recommend anything different than the liquid nails?
???? Ok ...I am doing this ... last time I used 2 separate pieces on the window side ... with a vertical trim filler strip under the window -- the window is full size -- ??? how and what did you use to cut out the faucet handles --- I have a 3 handle tub faucet I am going to use --- just like the original ... thank you in advance ...
A trim filler strip under the window will trap water which will trap mold. You can use a hole saw to cut out the faucet handles. You may be able to use scissors since the material is thin. I hope this helps.
???? Thank You in Advance for your great tutorial this is 4th time I have watched it and I am buying the products you endorse === the house is a old beach house the window is trimmed w/ redwood .75" / the exterior wall is cinderblock parged - so I will use 1/4" cement board attached w/ adhesive and screws butted up to the window trim --- ??? all the interior walls are 3/8" standard drywall - I use exterior grade paint on all interior surfaces ?? DO YOU SEE A PROBLEM - the video looks like You did the same = not green board = green board does NOT come in 3/8s ... Kudos if you answer this @@fixedbyli
@@covepoint1 I prefer to use cement board. Be sure to tape and add cement to the corners. Use the best adhesive Loctite Powegrab or the Loctite clear adhesive.
JUST SO you know, liquid nails specifically states its not for use on the plastic tub surroudns are made of
Thanks. See video description. Item is called Loctite tub surround.
@@fixedbyli didn't see that. loctite tub surround is what I normally use I found your video searching for cheaper adhesives to use. the loctite tub surround cartridges are like $9, and I'm a cheapskate
@@cynic256 same here. I used liquid nails on the back of the panels and the expensive Loctite stuff on the edges. Still holding up. I want to do a follow up video about 1 year after the install.
question? what if you were using outdoor sheeets of white 1/2 inch plastic? and nothing else on top of it.. then could you caulk the bottom edge and slide it into a tight you made the gap in between the shower wall sides and where they will meet with the walls? and then clean the edge and apply another bead of caulk completely around the whole bottom edge of the shower pan where it meets the wall?
I’m having a hard time visualizing it. 1/2” plastic is pretty thick! You’re priority is to avoid letting the water go behind the tub - slow leak could turn into a big problem. Make sure that the walls overlap the tub. Apply a bead of “supreme silicone” (link below) where the walls and tub meet.
www.homedepot.com/p/GE-Supreme-Silicone-10-1-oz-White-Kitchen-and-Bath-Caulk-2709108/100669748
Quick question… I purchased a proFlo shower base that does not have walls made for it. There is just a plastic lip. Can I use this with it? I was told I had to use tile, but it’s too expensive.
@@hope0811 this one is intended for a tub. Home Depot does carry a wall panel for your shower.
Where did you find the tub surround?
@@MarieBray-m5y the link is in the description
Hi! Can i put this over existing bath tiles? I want to remodel my bathroom but I don't want to tear anything down lol
Yes 👍 That’s a great idea for another video!
Thanks so much for the through video. My question is regarding the panel not touching the wall. Im imagining you crea the small gap by using a shim when installing. After the adhesive cures, do you fill the gap with the sealant? You said he word adhesive in the video, but I was hoping for a little more clarity on that seam.
*thorough video!
I didn’t use shims when installing the walls. You want to make sure the shower wall fits flush against the sheetrock because the shower walls are flimsy.
Also, the shower walls shouldn’t rest on top of the tub. This is where you should add 100% silicone. You want to make sure water and moisture doesn’t have a chance to climb up from behind the shower wall..
Useful that..Useful.
So you didn't use surround for the inside of the window well ? And is there a trim channel that caps over the surround on the corners on the market ? Thx
Yes! Use the remaining pieces of tub surround that were cut out from the window and Loctite Powergrab construction adhesive around the window. I pressed the construction adhesive out from the walls to overlap the corners. A corner trim on the outside of the window?! Too bulky/clunky for me.
Where can I find this shower wall
It’s in the description
Any tips on putting this over a tiled tub?
Adhesive is key. Loctite tub surround is best. Check out their website here. www.loctiteproducts.com/en/products/build/construction-adhesives/power-grab/loctite_power_grabtubsurroundconstructionadhesive.html
@@fixedbyli thank you
Could I install on top of existing ceramic tiles?
Yes! That is the next video idea. Don’t forget to use a trim for the edges as the tiles are raised from the wall.
How long did it take to dry the behind the wall glue before putting caulk sealant at edges?
Allow to set for 16 to 24 hours then caulk perimeter edges with Loctite 2in1 Tub & Tile sealant. Applications over ceramic tile may require up to 7 days dry time.
www.homedepot.com/p/LOCTITE-Power-Grab-Express-9-oz-Tub-Surround-Construction-Adhesive-2546759/311307070
How about putting this over tile? What types of primers would I need if it is possible? And where the panels meet on the flat part of wall do I need to caulk those? I have the ugliest dam grey tile in a tiny bathroom with no window. Ugh
I promise my next shower installation will be over tile. Loctite adhesive is the best. The one referenced in this video will work well to adhere to tile. Make sure the surface is clean to ensure it adheres.
@@fixedbyli thank you
@Fixed by Li *there is grouting everywhere. Never seen that done before. Every corner & seam is grout. Is that something new? I'm no pro but i don't believe it's normal for tub seal. It's cracked and pieces missing.
Can this be applied over tile and if so what adhesive should be used?
Just reglaze your tiles.
I just purchased the same surround...great video! What did you use to finish off/trim in the transition from the shower walls to the drywall above it?
No trim at all. The plastic material is thin that putting a trim around it would make it stick out.
did you put a layer of waterproofing membrane prior to using the liquid nails to put up the wall?
No. Not needed.. I sealed all edges. I did use the sheetrock with the moisture barrier though. Let me know if this helps.
How is that white thingy called?. It is not a tile, but... what material is it? and where do you get kind of sheet?
If you are referring to the bath wall, here’s the link www.homedepot.com/p/Delta-Pro-Series-60-in-W-x-57-in-H-Five-Piece-Glue-Up-Tub-Surrounds-in-High-Gloss-White-40154/204338479
Oops. I think you meant pvc board. Here’s the link
Your friend has shared a link to a Home Depot product they think you would be interested in seeing.
www.homedepot.com/p/Veranda-3-4-in-x-5-1-2-in-x-8-ft-White-PVC-Trim-IN5416425/205725098
Was the window already there, or did you put in the window? Where can you find a window like this? Thanks!
The window that was there was broken. I had to replace it. Because it was an odd size, the closest thing I could find was this..
Mobile Home Window 14X21...
www.amazon.com/dp/B01D0JZGVA?ref=ppx_pop_mob_ap_share
The iCloud photos are missing.
Sorry! Not sure what happened with iCloud?! I added it to instagram.
instagram.com/reel/CtBsT1NgDJ_/?igshid=MzRlODBiNWFlZA==
Where you did bought that type of surround walls?
I can't find this on their site
Hi Li,
Thanks for all your videos!
I have a question. I want to replace my current tub' wall surround with a new one. I bought my house 9 years ago. The surround was already in there. It had held pretty good over the years! No complaint. When I removed the existing surround, the drywall found behind was the regular grey color sheetrock; it was in a very good condition so I think I am going to keep it, but the drywall joints were not taped or mudded. Is it necessary for the drywall and joints to be taped, and mudded, before installing the new surround?
It’s not required that you tape the edges of the Sheetrock with this plastic wall surround. However, it’s not properly sealed around ALL edges, then the moisture will penetrate and damage the Sheetrock whether or not it has tape. Hope this helps!
Hi Li,
I am close to getting ready to install the surround. I prepped my grey drywall with mud to make it as smooth as possible by sanding.
Is it necessary for this type of install and for a nice finish to have the walls perfectly plumb, square and even? It's an old house and nothing is perfectly square.
It’s not required if it’s sealed correctly. If not, the Sheetrock will soften and fall apart. Think of this plastic dubbing as a thick schluter membrane.
@@fixedbyli Hi Li,
I believe you already answered my first question. The most recent one was about, do the walls and drywall need to be plumb and square, and also smooth and flat. I read somewhere that all irregularities under the surround will show.
I was thinking the same thing at different times ..
Are these 3 big panels? Or small pieces like tile?
Hey Michelle. They are big panels. Check out the description and the video.
What do you use to trim the outside edges?
If you’ve never cut thin vinyl like this before, cut an area that is not visible first. Use a straight edge, cut with a knife and then snap it.
can we get a 4month update on this?
It was completed for a customer at a rental. If I get called back to the that property, I will provide an update.
Aren't you supposed to use backer, something that is water proof?
Nope.
@@fixedbyli I like that!
Can I put this on duroc?
Yes! Tiles, durock, Sheetrock.
Water are these types of walls called
Delta pro wall surround. Here a link:
www.homedepot.com/p/Delta-Pro-Series-60-in-W-x-57-in-H-Five-Piece-Glue-Up-Tub-Surrounds-in-High-Gloss-White-40154/204338479
Where do you buy the panels?
Here’s the link to Home Depot. Yes. It’s still $99..
www.homedepot.com/p/Delta-Pro-Series-60-in-W-x-57-in-H-Five-Piece-Glue-Up-Tub-Surrounds-in-High-Gloss-White-40154/204338479
I've watched 3x and still didnt hear whzt kind of wall material you used instead of the typical acrylic surround-the-tub package.
Just checked. Links to the products are in the description.
listen.....this will work
I need help fit
OBSERVATION...watched the whole vid but u didnt show how to trim out the top and sides of the surround
I apologize. I will have to show that on the next video.
What the hell is that little bitty window in the shower .. 😂😂
Yes! 😂 it’s a window for a mobile home. Didn’t want to cut out the concrete block any further. This window worked perfect!
a.co/d/aXSFB1v
🇸🇻👍🏻
This now 125 dollars
Do you like I can appreciate doing things on the fly on the cheap and doing what you Gotta do to get it done but this is got to be temporary this is opening up a family to some serious risks that won’t be known until it’s obvious everybody’s sick mold will grow behind walls quickly and easily throughout that entire bathroom and you won’t even know it on the other side of that wall Sheet rock regardless if it’s painted is not waterproof or water resistant whatsoever I wouldn’t doubt if there’s already mold growing either underneath or behind that shower wall what a nightmare black mold is one of the most serious problems that America is just now beginning to wake up to the builders that don’t know what they’re doing and especially those who are working on bathrooms with water should definitely understand how important hardy board is
So for the price of extra material and your time buy some decent shit. Thanx
I would never install that crap in my house. The amount of work getting your walls perfectly flat and square would be insane. You might as well tile if you are going to put that much work into it.
Some customers think it’s cheaper to have this rather than tiles.
They are junk after a year
Not gonna lie.. Pretty flimsy. But, still going strong after 8 months. I’m actually going to use it over tiles!
@@fixedbylihow did that work over tiles?
😮😢use gloves
Clickbait. Nothing about $99 shower walls.
Not click bait! Lol. Here’s a link. It’s still $99
share.icloud.com/photos/025ZVBziVPDREF4R7HCJwHZMw