#2.[IN HINDI]SPUR GEAR TERMINOLOGY |KOM|

Hiii.. friends welcome again.
In this video I have explained about spur gear terminology.
The important definitions related to spur gear are as follows:
a) PITCH CIRCLE: it is an imaginary circle on gear, by which pure rolling action would transfer the same motion and power as the actual gear. It is the basis of measurement for other parameters of gear.
b) ADDENDUM CIRCLE: it is the circle drawn through the top of the teeth which is concentric to the pitch circle.
c) DEDENDUM CIRCLE: it is the circle drawn through the bottom of the teeth. It is also called as root circle.
d) PITCH CIRCLE DIAMETER (D): it is the diameter of pitch circle. The size of the gear is usually specified by the pitch circle diameter.
e) MODULE (m): it is the ratio of the pitch circle diameter to the number o f teeth on gear.
f) CIRCULAR PITCH (Pc): it is the circular distance measured along the circumference of pitch circle from a point of one tooth to the corresponding point on adjacent tooth.
g) DIAMETER PITCH (Pd) : it is the ratio of number of teeth to the pitch circle diameter.
h) ADDENDUM: it is the radial distance of tooth from the pitch circle to the top of the tooth. Its standard value is one module.
i) DEDENDUM: it is the radial distance of tooth from the pitch circle to the bottom of the tooth. Its standard value is 1.15.
j) CLEARANCE : it is the radial distance between the top of the tooth of one gear to bottom of the tooth of another mating gear. Its standard value is 0.157.
k) TOTAL DEPTH: it is the radial distance between the top of the tooth to bottom of the tooth. it is equal to the sum of the addendum and dedendum of a gear.
l) WORKING DEPTH: it is the radial distance from addendum circle to the clearance circle. It is equal to the addendum of two mating gears.
m) TOOTH THICKNESS: it is the width of the teeth measured along pitch circle.
n) TOOTH SPACE: it is the space between two adjacent tooth measured along the pitch circle.
o) BACKLASH: it is the distance between tooth space and tooth thickness measured along the pitch circle.
p) FACE OF TOOTH: it is the surface of the gear above pitch circle.
q) FLANK OF TOOTH: it is the surface of the gear below pitch circle.
r) TOP LAND: it is the surface at the top of the tooth
THANKS FOR WATCHING

[@nitin_kumar2.0]

thank you sir
bhut acche se samajh aaya
kal mujhe company mein gear ki drawing bnani hai video dekhkr kafi madad mili

[@vishalchaudhary5217]

Good video. Way better than others who just tell definitions

[@ajjupraghane801]

bahot badiya sir...asani se sikha diya aapne...thnq so much

[@haideritraders]

Bahoot shandaar samajhaya bhai

[@automotivefanatic]

Sir bohot badhiya explaination! Thank you Sir !

[@ganeshks6574]

Thank u so much sir.....ur explanation is 👌

[@vyomprakash2300]

Fantastic Sr...

[@abheyg]

Very good explanation, keep it up 👍

[@gulshanthawkar8263]

Very nice explanation in simple language

[@RakeshDas-dw4ds]

It helps a lot! Thanku 🙏

[@newtech5424]

amazing and well informative video!!

[@chaitanyanaik4951]

Brilliant work sir

[@manojitshee4719]

Superb explained thank you sir

[@kgaurav2623]

Very very nice 👍 its help me alot

[@Abhisheksharma-vu5sg]

asm sir ..... i totaly apriciate ur teaching

[@dharamvadodariya7037]

Helped me a lot
Thanks.

[@knowledgezone8748]

Very wonderful wrk

[@kranoop000]

Awesome Explanation

[@mohit9047]

It was best explanation!

[@t-04triyuginarayanmishra6]

ab ja je to smj m aaya gear terminology thank u sir

[@upendrarauta3749]

Very very nice explanation sir ji

[@akshayjain9518]

Ek Number explanation bro jite rho

[@easylearning6684]

+future update
Thank you bro

[@Rahulvlog467]

Nice explaination make more video of theory of machine

[@ankushdhakol2762]

Easy to undarstand...wow.

[@ManishKumar-lh6ol]

Amazing sir🙏

[@aasimaslam1497]

Well explain sir

[@umerramzan6586]

Very good video sir G

[@deepakswain515]

Very good teaching sir super
Sir gear chapter ki pure chapter or important Question upload KIJIYE

[@arjunnarayanan5474]

bhot badiya sir

[@simr5010]

shukriya bhai

[@anilkhatana502]

Bhai good working

[@abuzaralam6230]

Appreciation bro

[@manoharmirashi2061]

Thank you sir apne bhlahot acha samjaya. Sir gear rpm calculation video banayiye plz

[@SandeepKumar-jf9mc]

Excellent

[@rakeshkumar-dm6hr]

Thanks bhai please give more abdate video and the topic based upon metrology and quality control of 5 semester as soon as

[@umerramzan6586]

Thank you

[@AppasahebPatil-rb7nl]

Thanks......

[@no.more.official]

Thanks

[@shivamkumar-ff5ui]

Very good video

[@timirchakraborty6162]

Inspiration mil gaya

[@dipumondal8437]

Thanks sir

[@kshounishsarkar4756]

thanku sir

[@arun9023]

Thnx sir

[@SadBoy-wv6iw]

Thanks you sir

[@shahajiparit9743]

Very good

[@SurajMauryaBlogs]

Good

[@sahilraza7709]

Sir will there be any clearance between the mesh of involute gear ??

[@sanjaybamaniya9027]

Easy to understand by ur video...well done

[@easylearning6684]

+sanjay bamaniya thanks bro

[@makrandpatil8120]

Hi sub samajme aya thanks, hamare sir ka kuch bi samaj nahi raha tha "thanks"

[@Vikramkumar-jh3yk]

Nice sir

[@ambeengineeringindustries]

Good sir

[@painodreamwork8305]

Bahut sahi

[@md.jahangiralam1509]

good efforts, dosto.

[@mdshadab259]

THANK YOU SIT, THANK U SO MCH,
BHT A66A SMJHAYA AAPNE SIR
SIR - AAP SE REQUEST H K AAP ISI TARAH PRACTICALLY SMJHAYE

[@quant459]

wowwww

[@jaiswarprashant6887]

Thanks for this video :)

[@easylearning6684]

+Jaiswar Prashant
Aapko ye video kam aaya....ye mere lie khusi ki bat hai

[@mack12114]

👍🏼Explanation
What about Addendum Modification?

[@shubhamaupman7069]

Thanks bro I will get good marks Tommorrow 👍👍

[@easylearning6684]

+Shubhama Upman
Thanks for watching

[@easylearning6684]

+EASY LEARNING gear ke topics pe aur bhi videos hai....vo bhi tumhe kam aaenge

[@abhishekshukla418]

Cool

[@sayeddanishiqbal2540]

Super

[@vijaya_shetty]

super

[@sourabh.k3445]

Bro can you define crowing & gear lead and what is tha difference between lead and profile?

[@timirchakraborty6162]

Lazabab

[@Abhisheksharma-vu5sg]

sir aaj frst tym clearence pta chla h .....5 saal se clr ni tha

[@pramodmalodepatil8773]

Micromax mobile ki notification tone.. Bahut din ke bad suni 😅😅

[@keithbalce6364]

where can i get that same gear you are using as an example?

[@LaxmanSingh-ud1zv]

Nice video... thank you sir... making like this videos more and more.....

[@durgeshpandey7313]

Jbrdst

[@vishveshsharma564]

Awesome

[@easylearning6684]

Bro... please don't forget to share this video

[@KulwantSingh-bg4pj]

Kitne module ke cutting teeth me cutter kaise lagaye

[@easyengineering8976]

Mahooel!!

[@sibtainraza4432]

Sir mujhe ek gear box banana hai jiske input me ek round lagane par
Output me 10 round mile gear sige and gear teeth bataye

[@prithvirajraut8894]

Nice

[@easylearning6684]

Thanks

[@AjaySharma-xc6os]

Sir spur gear ke important question pe vedio btaado plzz koi mera exam h or b bahut bachcho k kaam aaegi plzz b. Tech exam point of view se spur gear k important question ki vedio bnaado

[@gaurang4617]

why the face width of tooth is more than the inner surface of gear ?

[@phanupatcharoenruk3830]

Hi sir
I have a question about gear.
Now I have file scan gear. I'm stuck with the problem of finding pressure angle and module. Can you help me?

[@SureshYadav-ow4xt]

Sir please tell me how to gear calculation for suppline cutting on hobbing machine example cutting to14 suppline

[@kisanagro786]

Ye 5inch 50date wala spur kis gadime lagta he jaldi se batao

[@visheshsharma7265]

Sir is pocket ki chean ka mesurment kese lete h?? Plz btao

[@bhupendrafitness3595]

Thermal expansion ke baare me kucch bataiye

[@rishavmishra7478]

Thns a lot sir
One thing i dont understand, Why so many dislike?

[@easylearning6684]

Duniya me dislike karne vale Loko ki kami nhi hai.:)

[@shahajiparit9743]

Number of teeth selection ke baare mein bataiye

[@tulsimillingwork3825]

Sir helical gear milling machine par katni hai to lead kaise nikale

[@sarojpandit1079]

sir practically kaise circular pitch find krnge please btye sir

[@pravindande2587]

Thanks sir,
I will face tomorrow my interview is well

[@easylearning6684]

+Pravin Dande
Best of luck.

[@easylearning6684]

+Pravin Dande
Me tumhare bhai jesa hu....muje bro kaheke bulao achccha lagta hai..plz

[@ABCM-fz2mr]

Plz provide of all technical terms calculation formula for draw the sketch otherwise it is not valiable. Thanks for video.

[@saurabhpandey442]

Sir plz spur gear assembly drawing sheet pr banana bta dijiye

[@bablukumar-auto-2144]

You have must concept

[@RajYadav-xu9kd]

101 gear tan ka nikalne ka Niyam bataiye sir

[@deepubabu4563]

Pitch circule diameter kis ko bolege sir

[@sadhanasingh1911]

6

[@veenithn8161]

What is the difference between pitch circle and Dedendum circle

[@easylearning6684]

Bahot different hai.
Maine video me explaine Kiya hai..ek bar fir se dekhlo sare confusion dur ho jaenge

[@veenithn8161]

Thankyou bro!

[@vikasmange383]

If two irregular gears are in mesh then how to know pitch circle and its radius. Because on pitch point all formulas are based.

[@easylearning6684]

+VIKAS MANGE
Irregular gear means?
All gears have predefined profile like cycloid or involute.
Can you elaborate your question?

[@KulwantSingh-bg4pj]

Aap hame gear teeth aur cutter ke formula bataye

[@muhammadiqbal6217]

Lead and profile explain

[@saurabhpandey442]

Sir plz
Fitter 4th semester drawing imp assembly and production par ak video bana dijiye

[@shivamkumar-ff5ui]

3d sound effects..while using headphone..😄

[@amirulhussain1850]

2.0 churi nikalnahe opur kitna namber geear aer niche kitna namder

[@nothingtoxicated5937]

termendous

[@sandeepkumarchaudhary8608]

Sir cam and follower pr ek video banaye please

[@easylearning6684]

+SANDEEP KUMAR CHAUDHARY
OK bhai

[@vpiab4084]

Apko new video kb ayegi