Very helpful information, thanks mate, any idea which one is the egt for Grand jeep Cherokee 2011 limited, I got 2 valves these don't know which one to take out? Thanks
i have a honda crv 1995 model rd1 ist generation, however it carries an EGT sensor that only have a one wire connection at the plug in section but i have looked all over the internet and so far only finding two wire ones. Can the two wire EGT sensor be used to replace the one wire sensor. Is one of the wires actually a ground wire?
Haha, if only it was that easy ??? Not so.on my Ford Escape !! Put my 13mm spanner on the sensor and it wouldnt budge, started to round the nut. Also no idea, and very difficult to follow wire back to engine bay where it is lost to sight ?
hi sam , I want to replace egt sensor on my ml350 bt 2014, would you please tell me where is it? under the cabin or under the hood? could'n find any video on line. thanks!
hey guys, i know it's been a while and you've probably figured it out. if it's anything like my 30 year old O2 sensor i just replaced. they're very similar. i read a trick i thought was BS but damn it worked great. obviously spray a bunch of penetrating oil best you can and let it sit for a bit. grab one of those little cupcake or birthday candles and heat up the bung while pressing the candle into the top of the threads best you can. it's best if you have the proper socket like this guy with the notch for the wire but you can use a wrench as well (it just twists the wire and you may not have a lot of room for the wrench). see if it will start to break free, if it does kinda work it back and forth and then a little more out at a time, be patient cuz you don't want to break this thing. again, i thought it was old wives tale but it worked great for me for both my O2 sensor and my EGR valve in a 1990 ford that was CRUSTY!:)))-barbie
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Clear to the point and detailed explanation. 10/10
Love the Bungee Jump at the end :D
What was the test to establish a faulty sensor ? Ohms etc.
What size socket is needed?
If we don't change the faulty EGT sensor on time with regards to the Ecodiesel truck, could this lead to shutdown of engine?
Hello, I want to ask you if you had any problems with unscrewing the sensor? Did you used any grease on it before unscrewing...??
Is this in the same location for a 2017 ram 2500 Cummins
Where are you located? I need to replace mine P2080
Very helpful information, thanks mate, any idea which one is the egt for Grand jeep Cherokee 2011 limited, I got 2 valves these don't know which one to take out? Thanks
Where do I buy for a lmm
Where do I find the sensor on a 2003 Ford F150 4.6 I am having such a hard time locating it ....
i have a honda crv 1995 model rd1 ist generation, however it carries an EGT sensor that only have a one wire connection at the plug in section but i have looked all over the internet and so far only finding two wire ones. Can the two wire EGT sensor be used to replace the one wire sensor. Is one of the wires actually a ground wire?
What bank and sensor number is this
Haha, if only it was that easy ??? Not so.on my Ford Escape !!
Put my 13mm spanner on the sensor and it wouldnt budge, started to round the nut.
Also no idea, and very difficult to follow wire back to engine bay where it is lost to sight ?
P246E is this code? From seat altea 2010
The location of the sensor is the same for most cars? I have a Jeep Patriot with engine light on, fault code P2080.
I believe P2080 is sensor before DPF (opposed to after)
@@yehmustafa2959is this the same for a 2017 ram 2500 Cummins?
you did id in 5 min, for my ML 350 BT , dealer ask 5 Hours of labor ........$1000 +
hi sam , I want to replace egt sensor on my ml350 bt 2014, would you please tell me where is it? under the cabin or under the hood? could'n find any video on line. thanks!
LOL that's why I don't trust any mechanic. But could be other dps sensor in other position...not all are located in easy places like this I guess.
I have a Volvo XC90 2011, I'm finding it difficult to remove the sensor, it seems really stuck, am i risking putting extra pressure to remove it?
Having the same problem on my peugeot 307 can anyone helpt its like really stuck i tried everything
hey guys, i know it's been a while and you've probably figured it out. if it's anything like my 30 year old O2 sensor i just replaced. they're very similar. i read a trick i thought was BS but damn it worked great. obviously spray a bunch of penetrating oil best you can and let it sit for a bit. grab one of those little cupcake or birthday candles and heat up the bung while pressing the candle into the top of the threads best you can. it's best if you have the proper socket like this guy with the notch for the wire but you can use a wrench as well (it just twists the wire and you may not have a lot of room for the wrench). see if it will start to break free, if it does kinda work it back and forth and then a little more out at a time, be patient cuz you don't want to break this thing. again, i thought it was old wives tale but it worked great for me for both my O2 sensor and my EGR valve in a 1990 ford that was CRUSTY!:)))-barbie
faim Shaikh
With these sensors prohibit a dpf regen
Dpf soot accumulation and egt sensors prohibit regeneration
Hi can u help me please
hello, can i use any EGT sensor on my AUDI A5 2010, 3.0 TDI, sportback ?
If your fortunate to live in a state that doesn't follow CA emission laws, just delete it.
Deleted and no problem