eufy X10 Pro Omni Cleaning and Maintenance

Powerful 8,000 Pa Suction for a Deeper Clean: X10 Pro Omni effortlessly removes hidden debris in carpets, including pet hair, for clean floors in just one pass.
MopMaster 2.0 for Spotless Floors: With 180 rotations per minute and 1 kg of downward pressure, X10 Pro Omni's dual mop pads easily eradicate stains and leave you with floors that shine. When a carpet is detected, the mops automatically lift by 12 mm to prevent it getting wet.
AI.See Smart Cleaning: X10 Pro Omni features advanced obstacle avoidance。 It's capable of identifying over 100 different objects like wires, shoes, and toys, even at night. Use the app to customize cleaning scenarios to customize your cleaning routine to your needs.
All-in-One Station for Hands-Free Cleaning: X10 Pro Omni's mop pads are washed using clean water, then dried with 45°C (113°F) heated air to prevent bad odor and the growth of bacteria. Its dust bin is emptied into the station's 2.5L dust bag, which only needs to be replaced every 2 months. The 3L clean water tank provides enough water to mop a 1,500-2,000 sq ft (150 sq m) home 2-3 times.
Auto-Detangling Roller Brush: The roller brush rotates in reverse and the Pro-Detangle Comb flips down to loosen and remove hair that's wrapped around the roller brush, so you don't have to.
Customizable AI.Map 2.0: Create No-Go Zones, virtual boundaries, and more so that X10 Pro Omni cleans your space in the way you want it.

[@rajivranjanjha9196]

Ordered on 16/4 , arrived on 19/4 and started having issues from 28/4 - The clean water in the station is insufficient, please add water. I tried replacing fresh water even though the water was as fresh as you can get in the UK. Nothing changed. Tried power cycle a few times by unplugging and re plugging it after a few minutes, no change. So yesterday I looked over the filter in the clean water tank for potential clogs and made sure the filter and the surrounding area are clear of any debris that might obstruct water flow. Detached water pipes inside the tank and blew some air to ensure nothing is obstructing even though it was as clean as it could be and then reattached the pipe, filled fresh water again and crossed my finger and started it again.. no change what so ever.Back to same error. I'm not sure if this is the standard quality of this X10 Pro RoboVac is.. Anyone's got any solution to my problem.. please advise.

[@TKukreja315]

My X10 is emptying dirty water into the cleaning tray. It’s not going up in the Bin.

[@wd3980]

I have the same issue.

[@kamstube]

I noticed my cleaning tray having water in there

[@kamstube]

I think the dirty water comes from when the mop gets cleaned, this happens in the tray when robovac is docked and there is a pipe which is meant to suck the dirty water into the dirty water tank

[@Mywinterstorm.]

Make sure your dirty tank is perfectly aligned, that was the problem with mine 😂