My dog saved my life after my wife passed away. If not for him I'd not be here right now enjoying your videos. When they deemed a dog as man's best friend they had no idea how true that was. That saying came from a court case in the 1800's.
my chihuahua saved my husbands life . He kept whining and yapping in the bedroom and wouldn't stop and i went to see and found my hubby had a heart attack and got him to the hospital and he flatlined in the emergency room and died 4 times in surgery . but he survived because of our PEE WEE That was back on 2012 but sad to say my APPLEHEAD CHIHUAHUA passed away in 2019 and it broke our hearts . He was a rescue from a puppy mill . I have never owned a dog that was not a rescue dog . We now have 3 rescues Puddles , Pickles and Peanut, all chihuahuas, sad how dogs are abused and not loved
That's a killer deal on that oak. Love buying local. Watching now for the hint. Love your pups! Edit update: Next vid............ cutting a hole with the rebuilt rig! I'm 70 and live 2500 miles from you. Will come for a job interview if you send an airplane ticket. 🤣
Cut all of the bolts flush with a grinder and cutting wheel so there all flush to the frame they are all self taping bolts. If you use A 1/2 or 3/4 impact drive works quite nice to drive them in. Poor 15 the frame works great. Iv done two or three flat bed and trailers💯👍✌️
I use a weed sprayer and mix up 50-50. Boiled linseed oil and Thompson's. Coat tell the board is wet and keep it that way for thirty minutes. Let dry. Usually the boards that are pine last for five to ten years.
Ditch that rubberized under coating and switch to surface shield or fluid film! It wont hold water against the steel like that rubberized coating will!
You know what's funny about the rattle cans is I always thought the rattle mixing ball was steel ,it not it's a marble an it's kinda Kool to use a long strap metal rod with the empty can in a box an poke a big hole in it an get the marble out.
I heard you comment about your views dropping. I have UA-cam shows like yours I've been following far a couple years. I came home one day from work and sat down to watch some it was like my UA-cam had been reset kinda like when they do your phone i stopped seeing things i normally watch its really suxs. Just letting you know! Enjoy your videos! God Bless. Brian
I have a new place finely poled the door off what I thought was an old pump house lmao Found an old hand dug well I will have to clean out all the junk then figure out how deep it is.
I told Davis heating and plumbing about you in Danville . How great you are dog love makes you healthier they lower your blood pressure . But they break your heart when they die ,
When you recoat the boards I would use a weed sprayer and mix 50/50 Thompson's and boiled linseed oil. Should last for years in-between coats. Or use an oil. The key is oil. The oil will work out of the board when it gets wet and protect the wood better than just Thompson's. And if you have not cut the boards yet try to cut out the Spalding on the ends. That would be the part that looks like something eat it and turned it black and colorful. Because a fungus did eat it and now it is not as strong as it was.
$900USD for 21 days in the vet!?!? My local vet charged me $250AUD just to do a X-ray for my dogs leg then another $500AUD to put a bandage on his leg.
I heard the cicadas at spots in the background of the video - They are really something over here in South Boston (That's South Boston, VA for those who aren't local to the area!)
DON'T EVER USE THEM SCREWS AGAIN PUT A 4 INCH FLAT STRAP AND WELD TO THE EDGE OF YOUR CHANNEL I'VE DONE THIS TWICE NOW AND ILL NEVER USE SCREWS AGAIN ...
My dog saved my life after my wife passed away. If not for him I'd not be here right now enjoying your videos. When they deemed a dog as man's best friend they had no idea how true that was. That saying came from a court case in the 1800's.
Thats probably why I have 4 dogs lol
my chihuahua saved my husbands life . He kept whining and yapping in the bedroom and wouldn't stop and i went to see and found my hubby had a heart attack and got him to the hospital and he flatlined in the emergency room and died 4 times in surgery . but he survived because of our PEE WEE That was back on 2012 but sad to say my APPLEHEAD CHIHUAHUA passed away in 2019 and it broke our hearts . He was a rescue from a puppy mill . I have never owned a dog that was not a rescue dog . We now have 3 rescues Puddles , Pickles and Peanut, all chihuahuas, sad how dogs are abused and not loved
A Great Teacher of All Your Knowledge. Keep up the Fantastic Work.
That's a killer deal on that oak. Love buying local. Watching now for the hint. Love your pups!
Edit update: Next vid............ cutting a hole with the rebuilt rig!
I'm 70 and live 2500 miles from you. Will come for a job interview if you send an airplane ticket. 🤣
New subscriber…trying to help you get to 100K. You have to be a good man to love your dogs the way you do! Thank you!
Just thought I'd say something you should have used something a whole lot better than Thompson's water seal
Had to give you a "like" for the dogd
Cut all of the bolts flush with a grinder and cutting wheel so there all flush to the frame they are all self taping bolts. If you use A 1/2 or 3/4 impact drive works quite nice to drive them in. Poor 15 the frame works great. Iv done two or three flat bed and trailers💯👍✌️
Nice video. Used diesel oil works great to treat trailer boards.
So I’ve been told.. ;)
From experience, Thompsons Water Seal sux.
Old motor oil, transmission fluid, brake fluid works better than anything I’ve seen.
I use a weed sprayer and mix up 50-50. Boiled linseed oil and Thompson's. Coat tell the board is wet and keep it that way for thirty minutes. Let dry. Usually the boards that are pine last for five to ten years.
around here you would pay over $100 just for one of those boards. I would have to say you stole that wood.
Ditch that rubberized under coating and switch to surface shield or fluid film! It wont hold water against the steel like that rubberized coating will!
Those folks like the sawmill and vet are giving you deals so they can book some good will if they ever need well work. Now that's good business.
Drain oil and diesel make a good stain for trailer decking
Thanks for buying a NAVISTAR, keeps my pension coming in ! 👍👍😊
You know what's funny about the rattle cans is I always thought the rattle mixing ball was steel ,it not it's a marble an it's kinda Kool to use a long strap metal rod with the empty can in a box an poke a big hole in it an get the marble out.
Take grinder cut old bolts off. Get you some self tapping floor screws most places sells trailer parts sells them takes 7/32 drill bits.
Keep vlogging bro. You already got viewers, just need more subscribers.
I heard you comment about your views dropping. I have UA-cam shows like yours I've been following far a couple years. I came home one day from work and sat down to watch some it was like my UA-cam had been reset kinda like when they do your phone i stopped seeing things i normally watch its really suxs. Just letting you know! Enjoy your videos! God Bless. Brian
The beginning of every year they change the algorithm. This year they push more shorts than videos. So I have to learn & adjust accordingly
I have a new place finely poled the door off what I thought was an old pump house lmao
Found an old hand dug well I will have to clean out all the junk then figure out how deep it is.
Why not just grind the screws off and save time that way and no holes where the screws came out
I told Davis heating and plumbing about you in Danville . How great you are dog love makes you healthier they lower your blood pressure . But they break your heart when they die ,
Would a gate valve work better for teh foam injector valve you were pointing out here?
When you recoat the boards I would use a weed sprayer and mix 50/50 Thompson's and boiled linseed oil. Should last for years in-between coats. Or use an oil. The key is oil. The oil will work out of the board when it gets wet and protect the wood better than just Thompson's. And if you have not cut the boards yet try to cut out the Spalding on the ends. That would be the part that looks like something eat it and turned it black and colorful. Because a fungus did eat it and now it is not as strong as it was.
$900USD for 21 days in the vet!?!?
My local vet charged me $250AUD just to do a X-ray for my dogs leg then another $500AUD to put a bandage on his leg.
I heard the cicadas at spots in the background of the video - They are really something over here in South Boston (That's South Boston, VA for those who aren't local to the area!)
What foamer do you use? EzMud, just surfactant always looking for something good for my geo rig.
i love equipment maintenance videos . hey maybe a needle valve would work better for your foam ?
Any idea why a deep well pump would connect at the pump, but not at the top. Putting in new pump. Can't get it to pump.
What are you gonna do with the Kydex. I have made holsters and knife sheaths with it for years
Mandy is an old girl like mine. Mine is almost 15 and still kicking, Mandy will make it too!
Why was there hydraulic fluid leaking if i may ask?
We have a toy australian shepherd and he is spoiled
What attacked your dog
They make a self tapping wood to metal screw now
Can i install a 4" pump in a 4" pvc sch-40 casing??
Thanks in advance!! Love from India!
Yes, but it's not recommended. It's best to use a 3" pump inside 4" Dia casing
I gave you a like, but I have cats 🐈
very good
i detect a sponsorship coming from thompsons water seal 🤣
The first half of your comment is true! "Hint"
10:30- Your dog got attacked by what? Another dog?
Yup. I got home & she was on the front porch nearly gone. Happened while I was out having my birthday dinner. Came home to a nightmare.
You do nice work. Love the🐕🐶
Ain't killing on the vet taking care of you. Glad to see the doggo is doing good after that too.
you need a head camera
👍🏻👍🏻
DON'T EVER USE THEM SCREWS AGAIN PUT A 4 INCH FLAT STRAP AND WELD TO THE EDGE OF YOUR CHANNEL I'VE DONE THIS TWICE NOW AND ILL NEVER USE SCREWS AGAIN ...
What type of experience do I need to get hired from yall @h2o mechanic