Thanks for the impressive review, bro! Omni will spare no effort to offer more and more new product in near future, like esc and battery, to diversify our product line. In regards to the pulley you mentioned in 13:16, its for CNC hub, which can be used for belt-driven board. No matter belt drive or gear drive, our hub will make it compatible.
Thank you! Yea, it wasn’t hard after I figured out the motor pulley thing. It was funny though…I had to kinda figure out how I was going to film and edit that, so it was a good challenge all around. Thanks for watching! 😃👍🏻
13:22 Those are 55T pulleys for converting to belt drive with these hubs. 😉 It'll be great to see you put those on with pneumatic wheels. Cool stuff, cool video!
Oh man! I would’ve definitely told them they needed to send you one. Although this one isn’t the best quality, and you probably found a better option to buy? Thanks for watching! 😃👍🏻
Congratulations you nailed with this example. The first board i thought to install this gear drive kit was trx the second verreal rs of course the most affordable ones. I guess if i have the budget i would go straight with eovan silo but as you mentioned even with that in mind i wouldnt get the flexiblity street wheeels. I love st. Thanks for the video keep it coming!!
Thanks for sharing. So grateful for sharing the real world install experience. How is the drive holding up now? Have you had any issues? Is there anything else to add in terms of advice on this drive? Thanks in advance. Keep rollin!
Thank you! Yea, still rockin' and rollin. I don't ride this board as much as my DIY or NYX, but haven't had any issues. Advice...learn how it all goes together in case you need to service them. Get more of the grease they offer, and don't overdo the grease if you have to service them. Thanks for watching! 😃👍🏻
Hi what was the original board? Was it belt drive? It's no problem to pop in gear drive and it will just work? No problems with esc and existing battery? Or is this approach more for someone doing everything from scratch?? Thanks in advance 🥰
Yea, it was a belt drive. Took those off, installed these, and was ready to roll! It was my first time doing anything like this, but I watched their install video and worked it out. I do offer tips in here in some things that were tough. No adjusting the ESC and battery was good too. Hope that helps. Thanks for watching! 😃👍🏻
Ive got those 145mm airless rubber wheels from omni. First of all they are fantastic! Ive tried a few other brands airless at wheels 150mm and they all are pretty terrible. These omni ones are almost like riding pneumies. They grip the road and even light off road. Ive got them on my emtb with matrix 2"s, and hearo deck. There is one catch though, they do not fit mbs hubs. It says it does in the description but these wheels are lowish profile and wide. The hubs wont close. However, they will fit regular evolve hubs. Overall these are absolutely badass and well worth the low price omni is selling them for
That's a good question, and one I can't answer, because I don't have the Tynee Mini 3 Pro mostly. Do those motors sit under the board or behind it? If behind it, I'm sure they would. If under, I'm not quite sure. You might contact them through their site and ask...they're very responsive. Thanks for watching! 😃👍🏻
@@VaporTrailChannel We may see a gear drive conversion kit from Omni compatible with the Tynee Mini 3 Pro in June 2024 (For the record: The motors sit under the board)
Vapor Trail Channel is where I share my passions. There are do differentiations for me. It’s simple…if you don’t like a particular video I publish, just watch what you want to watch. There’s so little coming out in the v@p3 world these days, and I’ve spent a lot of time, money, and dedication to my channel, so I don’t want to watch all of that fade away. I decided when I launched the channel that I would name it after the Rush album, Vapor Trails, so that it’s not specific to one genre and I could share everything here. The latter was so pervasive at one time that there wasn’t time for other content. Now there is, and I’m stoked to expand it. I very much appreciate your support here! And hope that you’ll understand and continue to do so. Thanks for watching! 😃👍🏻
I will say that Acedeck makes some really nice products! That's for sure. I bought the NYX Z1 and absolutely love it. These gear drives came out when nobody had them available for purchase...well, aside from a few expensive boutique drives. I can tell you that Omni makes very nice and great quality DIY parts, and they've just released a section where you can spec out and order a custom board to be built by them. And the price is very competitive with Acedeck. I get it man...there are some really nice production boards out there these days and Acedeck is at the top of that game IMHO. But, there are many who choose to DIY...or just want to change up their current board without spending over $1k for a new board. I'm happy that there are choices out there for everyone, and I'm here to show you what they look and perform like IRL. That way you can others can decide for yourselves if the items I show are for you. I'm sorta sad to see negativity in this community, as it's what brings me joy. Kinda like therapy. But I do appreciate your feedback! Thanks for watching! 😃👍🏻
Please name one DIY place that can make the entire board as nice as an Ares X1 2023 for 1600 dollars. If that exists, I'll DIY lol. As far as I've seen, DIY always costs more, and you end up with an inferior product. I get doing it for the joy of it though. That makes sense. @@VaporTrailChannel
Thanks for the impressive review, bro! Omni will spare no effort to offer more and more new product in near future, like esc and battery, to diversify our product line. In regards to the pulley you mentioned in 13:16, its for CNC hub, which can be used for belt-driven board. No matter belt drive or gear drive, our hub will make it compatible.
OH! That makes complete sense. I’ll add that in the description. Thank you for the kind words, and information 💯 Keep the great products coming.
finally there is a youtuber showing how to instal. looks not hard. very cool video!
Thank you! Yea, it wasn’t hard after I figured out the motor pulley thing. It was funny though…I had to kinda figure out how I was going to film and edit that, so it was a good challenge all around. Thanks for watching! 😃👍🏻
⚡🤙🏼 *The year of Gear Drive* 🤙🏼⚡
Nice to see them goin a bit more mainstream
Yea, I'm so stoked to see where it's already gotten, and where it will all go in the future! Thanks for watching! 😃👍🏻
Ive been looking at this gear drive for my hadean for a while now
very informative video.
Awesome! Thanks for watching 💯
13:22 Those are 55T pulleys for converting to belt drive with these hubs. 😉 It'll be great to see you put those on with pneumatic wheels. Cool stuff, cool video!
That makes complete sense! Yea, I’m gonna play around with the hubs / wheels and do some follow up. Thank you for watching! 💯
Omni didnt send me a puller. It was the biggest pain in the ass to biy diffrent ones and try to get it off.
YOU NEED THE PULLER
Oh man! I would’ve definitely told them they needed to send you one. Although this one isn’t the best quality, and you probably found a better option to buy? Thanks for watching! 😃👍🏻
Congratulations you nailed with this example. The first board i thought to install this gear drive kit was trx the second verreal rs of course the most affordable ones. I guess if i have the budget i would go straight with eovan silo but as you mentioned even with that in mind i wouldnt get the flexiblity street wheeels. I love st. Thanks for the video keep it coming!!
Awesome! Thank you so much for watching and the feedback 💯⚡️🛹⚡️
That direct drive is Nice, cool build.
Thank you! Love this stuff. Thanks for watching! 😃👍🏻
Thanks for sharing. So grateful for sharing the real world install experience. How is the drive holding up now? Have you had any issues? Is there anything else to add in terms of advice on this drive? Thanks in advance. Keep rollin!
Thank you! Yea, still rockin' and rollin. I don't ride this board as much as my DIY or NYX, but haven't had any issues. Advice...learn how it all goes together in case you need to service them. Get more of the grease they offer, and don't overdo the grease if you have to service them. Thanks for watching! 😃👍🏻
I have a Hurricane with meepo gear drive and now, I can never go back to belts. I'm getting an Omni drive for my Mboard....Great video!
Thank you so much! Yea, gear drive is super nice, and with these, you can swap to a lot of different wheels. Thanks for watching! 😃👍🏻
i like my belt driven zealot but im thinking of upgrading more of the parts like my hubs motors
Nice! Yea, it's fun to get deep into it. Thanks for watching! 😃👍🏻
Hi what was the original board? Was it belt drive? It's no problem to pop in gear drive and it will just work? No problems with esc and existing battery? Or is this approach more for someone doing everything from scratch?? Thanks in advance 🥰
Yea, it was a belt drive. Took those off, installed these, and was ready to roll! It was my first time doing anything like this, but I watched their install video and worked it out. I do offer tips in here in some things that were tough. No adjusting the ESC and battery was good too. Hope that helps. Thanks for watching! 😃👍🏻
No constant backlash adjustment like Trampa gears?!
None at all with these! Sorry for the delayed response. Just seeing these comments. Thanks for watching! 😃👍🏻
Ive got those 145mm airless rubber wheels from omni. First of all they are fantastic! Ive tried a few other brands airless at wheels 150mm and they all are pretty terrible. These omni ones are almost like riding pneumies. They grip the road and even light off road. Ive got them on my emtb with matrix 2"s, and hearo deck. There is one catch though, they do not fit mbs hubs. It says it does in the description but these wheels are lowish profile and wide. The hubs wont close. However, they will fit regular evolve hubs. Overall these are absolutely badass and well worth the low price omni is selling them for
Yea, I’m gonna get those wheels
Will these fit the Tynee Mini 3 Pro?
That's a good question, and one I can't answer, because I don't have the Tynee Mini 3 Pro mostly. Do those motors sit under the board or behind it? If behind it, I'm sure they would. If under, I'm not quite sure. You might contact them through their site and ask...they're very responsive. Thanks for watching! 😃👍🏻
@@VaporTrailChannel We may see a gear drive conversion kit from Omni compatible with the Tynee Mini 3 Pro in June 2024 (For the record: The motors sit under the board)
@@stephanpieterse6960 That would be quite cool! Thanks for watching! 😃👍🏻
Would you be willing to make separate channels for this and vaportrail?
Vapor Trail Channel is where I share my passions. There are do differentiations for me. It’s simple…if you don’t like a particular video I publish, just watch what you want to watch. There’s so little coming out in the v@p3 world these days, and I’ve spent a lot of time, money, and dedication to my channel, so I don’t want to watch all of that fade away. I decided when I launched the channel that I would name it after the Rush album, Vapor Trails, so that it’s not specific to one genre and I could share everything here. The latter was so pervasive at one time that there wasn’t time for other content. Now there is, and I’m stoked to expand it. I very much appreciate your support here! And hope that you’ll understand and continue to do so. Thanks for watching! 😃👍🏻
I'd pay some pretty good coin if we can get a variation that matches the anodization of the Zeus Pro
That would be cool
No reason to buy their overpriced crap when you get a similar or better board from Acedeck for much less, already assembled.
I will say that Acedeck makes some really nice products! That's for sure. I bought the NYX Z1 and absolutely love it. These gear drives came out when nobody had them available for purchase...well, aside from a few expensive boutique drives. I can tell you that Omni makes very nice and great quality DIY parts, and they've just released a section where you can spec out and order a custom board to be built by them. And the price is very competitive with Acedeck. I get it man...there are some really nice production boards out there these days and Acedeck is at the top of that game IMHO. But, there are many who choose to DIY...or just want to change up their current board without spending over $1k for a new board. I'm happy that there are choices out there for everyone, and I'm here to show you what they look and perform like IRL. That way you can others can decide for yourselves if the items I show are for you. I'm sorta sad to see negativity in this community, as it's what brings me joy. Kinda like therapy. But I do appreciate your feedback! Thanks for watching! 😃👍🏻
Please name one DIY place that can make the entire board as nice as an Ares X1 2023 for 1600 dollars. If that exists, I'll DIY lol. As far as I've seen, DIY always costs more, and you end up with an inferior product. I get doing it for the joy of it though. That makes sense. @@VaporTrailChannel
They didn't send me a gear puller. I was wondering why the gear didn't come off after drilling out the set screw🥲
Yea, that’s a pretty important part