@@BangForYourBuckRc Pretty hot this side of the pond, we are in store for a 5 day heatwave starting tomorrow (tues) in the high 39C and even over 40Celcius they have forecast
Hi Robby, oh wow! Modifying the WLToys drive shaft to meet the requirements of the Ujietoys components, ingenious 😊 I see that it was hard work to get just right and fit into the output cups, that hardened material, certainly can take some filing, sanding and shaping, glad to stuck with it, to ensure that perfect fit. You’ve done a great job and it’s a good tip for those needing some replacement components for the Ujietoys RC😊😊 best wishes to you and the family 😊
Thanks John! Yes , if anyone buys this because of my recommendation I can’t leave them totally stranded now can I? 😆 I do hope that they start producing actual fitted parts though. It’s a great rc!😁Thanks again for support and awesome comment ! 😃👍🏻
Great Fix Robby 💯 sometimes the file is the best to use for not heating up the part...takes a few minutes more but is more precise 🎉 RCF4L 👍😎👍 AOAH ✌🤠👍 HFLPRCing 🙏 Stay Safe and Play Healthy Brother and Have a Great Week 🎉⭐🎉
Your right Larry. A file and a bit of tenacity go a long way! Thanks for the encouraging words my friend ! Happy Thanksgiving to you and yours brother. 🙏👨👩👦🦃🍽✌🏼
I know , right! Some people were saying the 1/14 144002 cvd’s the ones to use, but there were no measurements on those ones. And I do have some 1/12 WLtoys trucks here and none of those cvd’s were long enough. This UJIE toys truck is almost a proper 1/10 so it’s slightly bigger than most 1/12 scale stuff. I really thought it would be sharing parts with my yellow D07 truck as I compared it to in my first video on this.
The truck itself seems like a winner! Hopefully parts support will come around soon!🙏 Nice workaround there Robby!👏 I say you deserve to go out and get a dremel after all that filing!😅 Have a great week brother!👍😊
Thanks JEREMY! I thought it might only take maybe 30 min. Wow, not as easy as I thought it was going to be. Maybe a dremel for Christmas this year?😆🤣🎅🏼🎄 Have a Great Thanks giving week my friend!✌🏼🌟🦃🙏👨👩👦
Thanks Fonzie, yes indeed, you are 100% right! Doesn’t make sense that they’d go through all that trouble to print parts and part#’s But not have parts available. ??? Yes glad I got it going though and it runs awesome! ✅rotary tool is on the list!🎅🏼🎄
Santa needs to bring you a dremel for Christmas! That was a lot of work right there! Sorry you could not find the part you needed and the one you got needed so much attention to get it to fit.
It’s all good Addam. will have to put that on my list 🎅🏼! LoL! What matters is that it’s working and not a dead pony! 🤣 Thanks for watching Addam. I always look forward to your comments! 👍🏻 Happy Thanks giving brother! 🌟✌🏼🦃🍽️👨👩👦
Thanks for the great tip! I did think of doing that, but I didn’t have a file that skinny. 😋And the ball itself was too big for inside the cup. I just used what I had available! Thank you for watching my friend👊🏼😎
@@BangForYourBuckRc just thouht sanding a straight line might be easier than a ball and two pins, which have the problem they're rotating. Many roads lead to Rome.
@@RCBirds You are absolutely right Dirk LoL! There is more than 1 way to skin a cat. If this happens again,I will definitely try the tip you are recommending! For now it’s working and rotating . I won’t mess with it unless it breaks again. 😬 Thanks so much in trying to help and for your kind support brother!✌🏼😎👊🏼
I thought about ordering some cupsafter seeing that the ball end wouldn’t fit. Didn’t know that was going to happen. Just did what I needed to get the ball/pin end in. Good to go now. I’m a happy camper😃👍🏻🍻
It's definitely a weird one this. I've emailed the manufacturer, but I never got a reply about spares backup. I dont know if it was you, but another bloke did the same, and they told him to buy another truck for the spares because the trucks are so cheap!! 😮 Lots of Wltoys bits mixed in there, just a case of what? Can never understand having a spares list in the book, when the spares are unattainable! 😢
I share the same frustration Oliver. Why go through the Trouble of having a complete list of parts , with part numbers and not bother to reference a way to order them? I haven’t given up though as I like the truck that much! You mentioned you emailed the actual manufacturer right? Where did you get get their email address? I found info that they are manufactured in India, but saw no email address or any other useful info. Any way you can share that address? I had contacted various sellers but got vague responses saying “they will contact me when parts arrive” and “we know nothing about any spare parts”, as well as “ we don’t carry the parts-sorry!” Not very helpful 😝 Anyway, this is frustrating . Don’t think I’d buy another for the use of parts as that bloke suggested!😝 Please stay in touch if you find anything Oliver,as I will do the same!👊🏼😎✌🏼
Yes me too! Can’t see anything up close for the last couple yrs. Gets worse every year. Anything beyond 10ft I’m golden!😝 How much is what? LoL! Think my Brain is going too!🤪
I know, very aggravating too! I’ve have been using wltoys 1:10 parts to repair mine. Some things fit perfect and other things slightly modified. Look up WLtoys 104001 parts
@@BangForYourBuckRc i bought one from amazon and it came brushless, stripped a diff planetary gear on 3s almost instantly, but i got it with amazon's Vine program, so i can probably message the seller for a new part or new car, but do you think the differential from the wltoys 104001 will work in this car? they look similar
Good to know you can just throw some WLtoys parts at it and repair these RC's even though they have no parts support, good helpful video Robby 👍
Thanks Dave. At least for now I know what will work even if it might need minor alteration.
Hope all is well my Friend.👍🏻😎🍻
@@BangForYourBuckRc Pretty hot this side of the pond, we are in store for a 5 day heatwave starting tomorrow (tues) in the high 39C and even over 40Celcius they have forecast
@@PERTHWESTOZRC Damn, that’s hot🥵. Is is humid down there too?
Hi Robby, oh wow! Modifying the WLToys drive shaft to meet the requirements of the Ujietoys components, ingenious 😊 I see that it was hard work to get just right and fit into the output cups, that hardened material, certainly can take some filing, sanding and shaping, glad to stuck with it, to ensure that perfect fit. You’ve done a great job and it’s a good tip for those needing some replacement components for the Ujietoys RC😊😊 best wishes to you and the family 😊
Thanks John! Yes , if anyone buys this because of my recommendation I can’t leave them totally stranded now can I? 😆
I do hope that they start producing actual fitted parts though. It’s a great rc!😁Thanks again for support and awesome comment ! 😃👍🏻
Wow เป็นชิ้นส่วนที่ยอดเยี่ยม Follow the next episode. 💯
Always thankful to you!🌟🙏🥰
Great Fix Robby 💯 sometimes the file is the best to use for not heating up the part...takes a few minutes more but is more precise 🎉 RCF4L 👍😎👍 AOAH
✌🤠👍 HFLPRCing 🙏 Stay Safe and Play Healthy Brother and Have a Great Week 🎉⭐🎉
Your right Larry. A file and a bit of tenacity go a long way! Thanks for the encouraging words my friend ! Happy Thanksgiving to you and yours brother. 🙏👨👩👦🦃🍽✌🏼
I definitely wouldn’t have thought the 1/10 stuff would’ve been the correct size
I know , right! Some people were saying the 1/14 144002 cvd’s the ones to use, but there were no measurements on those ones. And I do have some 1/12 WLtoys trucks here and none of those cvd’s were long enough. This UJIE toys truck is almost a proper 1/10 so it’s slightly bigger than most 1/12 scale stuff. I really thought it would be sharing parts with my yellow D07 truck as I compared it to in my first video on this.
Wl toys would’ve definitely been my go to , since it looks like their 1/14 Truggy.. maybe mjx or Rlaarlo too
I tried the Rlaarlo 1/12 buggy cvd’s before I ordered and those are way too short. This is quite a bit bigger than that buggy.
Very nice and informative tutorial and info share!!!
Thank you my friend! Really appreciate your comment!💯👊🏼🤗
You are Welcome my Friend 🐼🐻❄️👍🏻
The truck itself seems like a winner! Hopefully parts support will come around soon!🙏
Nice workaround there Robby!👏
I say you deserve to go out and get a dremel after all that filing!😅
Have a great week brother!👍😊
Thanks JEREMY! I thought it might only take maybe 30 min.
Wow, not as easy as I thought it was going to be. Maybe a dremel for Christmas this year?😆🤣🎅🏼🎄
Have a Great Thanks giving week my friend!✌🏼🌟🦃🙏👨👩👦
Nice RC review. Thanks for sharing this video.
Your welcome! Hopefully it helps anyone who may buy this Rc. 👊🏼😎✌🏼
I strange way of doing business 😕 but glad you got it sorted 👍. You need a rotary tool for Xmas 😊 !
Let the wife know about it nice work
Thanks Fonzie, yes indeed, you are 100% right! Doesn’t make sense that they’d go through all that trouble to print parts and part#’s
But not have parts available. ???
Yes glad I got it going though and it runs awesome! ✅rotary tool is on the list!🎅🏼🎄
Santa needs to bring you a dremel for Christmas! That was a lot of work right there! Sorry you could not find the part you needed and the one you got needed so much attention to get it to fit.
It’s all good Addam. will have to put that on my list 🎅🏼! LoL! What matters is that it’s working and not a dead pony! 🤣 Thanks for watching Addam. I always look forward to your comments! 👍🏻
Happy Thanks giving brother! 🌟✌🏼🦃🍽️👨👩👦
@@BangForYourBuckRc same to you!! Hope you and the family have a great Thanksgiving!
Nice detailed video Robby 😊
Great information
Thanks DeAndre bro!
Always appreciate hearing from you !👊🏼😋 Happy Thanksgiving week my friend! We have a lot to be thankful for! 👨👩👦🦃🍽✌🏼
Interesting Robby. Just an idea, as long the difference is under a millimeter, what about sanding down the slot in the drivecup?
Thanks for the great tip! I did think of doing that, but I didn’t have a file that skinny. 😋And the ball itself was too big for inside the cup.
I just used what I had available! Thank you for watching my friend👊🏼😎
@@BangForYourBuckRc just thouht sanding a straight line might be easier than a ball and two pins, which have the problem they're rotating. Many roads lead to Rome.
@@RCBirds You are absolutely right Dirk LoL! There is more than 1 way to skin a cat.
If this happens again,I will definitely try the tip you are recommending! For now it’s working and rotating . I won’t mess with it unless it breaks again. 😬
Thanks so much in trying to help and for your kind support brother!✌🏼😎👊🏼
Nice 👍
What about ordering the wl toys drive cups Robbie??
I thought about ordering some cupsafter seeing that the ball end wouldn’t fit. Didn’t know that was going to happen. Just did what I needed to get the ball/pin end in. Good to go now. I’m a happy camper😃👍🏻🍻
It's definitely a weird one this. I've emailed the manufacturer, but I never got a reply about spares backup. I dont know if it was you, but another bloke did the same, and they told him to buy another truck for the spares because the trucks are so cheap!! 😮
Lots of Wltoys bits mixed in there, just a case of what? Can never understand having a spares list in the book, when the spares are unattainable! 😢
I share the same frustration Oliver. Why go through the Trouble of having a complete list of parts , with part numbers and not bother to reference a way to order them? I haven’t given up though as I like the truck that much! You mentioned you emailed the actual manufacturer right? Where did you get get their email address? I found info that they are manufactured in India, but saw no email address or any other useful info. Any way you can share that address?
I had contacted various sellers but got vague responses saying “they will contact me when parts arrive” and “we know nothing about any spare parts”, as well as “ we don’t carry the parts-sorry!” Not very helpful 😝
Anyway, this is frustrating . Don’t think I’d buy another for the use of parts as that bloke suggested!😝
Please stay in touch if you find anything Oliver,as I will do the same!👊🏼😎✌🏼
Funny they all use a lot of the same parts change up some. Take all the parts you making already and put em together??
Yeah, guess it saves them on new temples! 😂 I’m sure cost is why they do it! 👍🏻
Hope your having a great Thanksgiving 🦃🍁🍻brother!
I’m blind theses days too lol atleast up close!!
How much is new one!
0000000100000001
Flight of concords reference
Yes me too! Can’t see anything up close for the last couple yrs. Gets worse every year. Anything beyond 10ft I’m golden!😝
How much is what?
LoL! Think my Brain is going too!🤪
The truck itself lol!!
Don’t worry mine is too.
Too much information!!
@@rcarty419 I believe it was $130 delivered
still no parts in June '24 😱
I know, very aggravating too! I’ve have been using wltoys 1:10 parts to repair mine. Some things fit perfect and other things slightly modified. Look up WLtoys 104001 parts
@@BangForYourBuckRc i bought one from amazon and it came brushless, stripped a diff planetary gear on 3s almost instantly, but i got it with amazon's Vine program, so i can probably message the seller for a new part or new car, but do you think the differential from the wltoys 104001 will work in this car? they look similar
@@Magnolioliolia diffs from the 144001 actually fit, although the outdrive cups are shorter