Це відео не доступне.
Перепрошуємо.
Screwing up my first sign on the new Onefinity cnc.
Вставка
- Опубліковано 19 чер 2023
- I explain why I'm going for an x-carve cnc to the Onefinity Journeyman X-50 cnc. Also I screw up my carve at the end of the video. Luckily it's salvageable because it's just the profile cut but still.
By day I am a woodturner/woodworker . Check out my work here. daileywoodwork...
Some of the things that we use to make our videos.
TYM T25 tractor
Titan Implements 5 foot double edge grader number 3605
CountyLine 25 ton wood splitter from Tractor Supply
GoPro Hero 11 amzn.to/3GJgbgK
GoPro Hero 8 amzn.to/3OZiM7T
DJI wireless microphones amzn.to/3ih9Fo4
3M WorkTunes Connect amzn.to/3zElpqo
ISOtunes PRO 2.0 Bluetooth Earplug Headphones amzn.to/3IzftCe
DISCLAIMER: This video and description contains affiliate links, which means that if you buy something through these links I may get a small share of the sale which helps us to keep making content.
And when it's probing Z only for a bit change, flip the probe to the other side and it probes the pocket of the probe and not the small circle on the other side
Thanks for the additional advice. I didn't know that on the z probe.
You know you can raise the z to install your new bit and then go to your monitor and hit probe z only. This will then restart from your home position with the new z recalibrated. You were standing in the way of the camera to see if that's what you were doing but from the little i could see it looked like you were trying to do the bit change without moving anything.......Hope this helps if that's what is happening
Thanks. My mother always said I made a better door than window. I had both the engraving path and profile cut in the same file and a box came up instructing me to change the bit but I couldn't move the machine. Now I'm wondering if the joystick was turned on. Hmmm the joys of learning.
What in the name of Jesus is going on with your shop?
Complete and utter chaos. Lol