For those who they're clipper start to make noise , check the horizontal of the blade when in ON . If the blade touches your hand , need to fix the blades more right or left .
hahaha 100% real friend, but attention there is a solution, sand each comb by hand with a file on the inside, you can clearly see the place where they rub at the extreme zero gap
I got to the point that I was about to use a screw extractor kit before finally using a super small, sharp flat-head screw driver (one for small electronic devices) and it got deep enough to pop them loose. Unbelievably tight right out of the box as well.
JRL 2020C is the best clipper I've used in 30yrs🔥🔥🔥 💈💈💈 love the zero gap tool
just bought this today can't wait to use it
Took apart. Cleaned out hair. Followed your instructions and the manual. Now they are not quiet at all. Please help. They are a brick now 🥺
mine came with no instructions at all
For those who they're clipper start to make noise , check the horizontal of the blade when in ON . If the blade touches your hand , need to fix the blades more right or left .
Thanks, I needed this tutorial for my madeshow m10+ ❤
Is that only me or the zero gapping tool just doesnt fit in
You have to loose the Blade a bit, so that the tool can fit in. Had the same issue
literally, the worst zerogapping experience IVE EVER HAD
same
bro wtf
Why not just produce them zero gapped from the get go?
Not everyone zero gaps their clippers and its easier to zero gap then to un zero gap
@@CobbInterscope when it comes out fresh of thr box the line up isnt even one side always higher than the other side
@@demiru6022 I was responding to the guy above me not the actual video
it comes with not zero gaped,why not everyone using a clippers is a pro barber yeah?
Gtfo rookie at some point you got to replace the blade. It's good to know there is a zero gapping tool
Method did not work on my Onyx clippers I just received. I used a mirror to zero gap mine.
I just realized once you switch for the fade blade the zero gapping tool doesn't fit anymore lmao
Whats the point of the zerogap if i have a trimmer and a shaver math aint mathing
so when you make a guide line with ur trimmer you can take it out easier and faster with a zero gapped clipper
Or you make a guide Line with a Clipper and take it out with a trimmer
@@tisch853why use a trimmer for the wrong use
no hate but the zero gap tool dosnt work at jrl onyx
Make sure you close the blade otherwise the tool wont fit.
does it work with the onyx
What’s the type of screw used in the clipper blades?
Thanks 🙏🏼
Thx bro
Why does my jrl lever not click
Why do they use with zero gap? for skin fade?
Yes it will get closer to the skin
@@PsnJerzCity1980 Thank you sir.
Pointless really trimmers will do the job for skin line, then you don’t get risk of marks to the skin, or loud trimmers.
Does clipper come with zero gap tool
Yes
Its not zero gap tool .. it always left like 1 mm. Have to zero gap manually i guess
If you think there was a 1mm space between the blades, you have no clue of a 1mm distance. Use a ruler my guy.
Trash is just that dirty south FL strong FLOgrown n Christ
Apakah zero gap dengan pemasangan tidak sesuai bisa melukai?
PLEASE do not zero gap them, they will turn loud af when you are using it with guards 💀
hahaha 100% real friend, but attention there is a solution, sand each comb by hand with a file on the inside, you can clearly see the place where they rub at the extreme zero gap
@Lucas Araújo CORRECT
are you sure
@@clearriver5987 that’s what happened with mine but I managed to get rid of this sound
@@masavana261barber6 how did you get rid of it
Samir Throughway
Geoffrey Plain
Ruthe Bridge
Gracie Cove
I cant even unscrew it its super tight
How u open it
I can't loosen the screw because it's too tight, any tips?
I got to the point that I was about to use a screw extractor kit before finally using a super small, sharp flat-head screw driver (one for small electronic devices) and it got deep enough to pop them loose. Unbelievably tight right out of the box as well.
@@jcior I saw a video where you remove them with a screwdriver, as it can start to loosen, but I haven't tested it yet.
Bro me too these clippers are garbo i wanna return them
Emard Points
Shit system. Back to moser
Dicki Fork
Worst clipper ever tbh, cheaply made...
So…which is d best clipper ?
Please and thanks
528 Harmony Falls
8858 Mosciski Summit