White Oil Smoke. Kawasaki FR730V Engine Re-hone Re-ring Re-fresh Part 2 of 2.
Вставка
- Опубліковано 10 вер 2024
- This is a second part of a slight refresh to my Kawasaki engine that was smoking (and smelling) very badly.
Items I purchased for my FR730V engine:
Standard size ring kit for both cylinders - amzn.to/3ofIVqT
O-ring for the oil passages between a block and oil pan (needs 2pcs) - amzn.to/3pJeSbv
Spark plugs NGK (4- pack) - amzn.to/3MA6LXI
14mm thin wall deep socket (none of the one that I had couldn't reach one of the head bolts on the right side) - amzn.to/42W6LXA
Genuine oil filter - amzn.to/3Wkj4Li
Kawasaki 20W50 oil (2 quarts required) - amzn.to/3o8IVcf
Kawasaki Valve stem oil seals - amzn.to/3ImHRZf
Valve cover gasket - amzn.to/3o90NDQ
Oil breather cover gasket - amzn.to/3MyICRA
Aftermarket carburetor (works ok but manufacturing quality is not as good as original, but 15% of the cost of original sold it to me) - amzn.to/41GzIpf
As an Amazon Associate I earn from qualifying purchases. #commissionsearned.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
Headlight restoration kit:
CERAKOTE Ceramic Headlight Restoration Kit - amzn.to/3NKwomx
Stuff I purchased for my Boxster 987
Replacement gear for the convertible top transmission - amzn.to/3PLMsX0
Replacement ball joint sockets for convertible top push rods - amzn.to/3JyBRue
Replacement FAN & TEMP buttons - amzn.to/3JzZPVK
Original Porsche OIL filter cap socket - amzn.to/37GsknN
Replacement mirror cover for Boxster Cayman 987 sun visor - amzn.to/3jsMbt5
Lowering springs H&R - amzn.to/3xmuO5e
Power tools:
1/4" Milwaukee M12 Fuel ratchet - amzn.to/3sBmcUm
3/8" Milwaukee M12 Fuel ratchet - amzn.to/3rJLMY0
1/2" Milwaukee right angle impact - amzn.to/3oGqQQ6
1/4" Milwaukee M18 FUEL Hex Impact Driver amzn.to/3Jk1r6r
Tools:
Spark plug magnetic socket set - amzn.to/3jyhiqW
Triple Square Spline Bit - amzn.to/3Lq398i
Mityvac MVA6851 Fluid Extractor - amzn.to/3sCU2IV
Arcan Underhoist Support Stand, 3/4 Ton Capacity - amzn.to/3Jc2Uf8
It feels great to bring those motors back to life, and saves you a ton of money(at least $80 an hour +parts).
Congratulations!.....AL Scott
Both Part 1 and 2 videos are excellent. Thanks for sharing your experience..
Great job!
Well done!
Very interesting video, thanks 👍
where did you get all your spec sheets information from?
Found it somewhere online.