Sections in Revit - Beginner to PRO Tutorial
Вставка
- Опубліковано 26 лип 2024
- Get all Revit Courses: balkanarchitect.com/
My Revit project files: / balkanarchitect
Get my Personal Revit Template + Family Pack: balkanarchitect.com/p/balkan-...
Subscribe for more!
Please Like this Tutorial!
Follow me on social media:
Instagram: / balkanarchitect
Facebook: Balkan-Archi...
Twitter: / architectbalkan
thank you a million time!!! not only for this video but for the whole channel you saved me!!!
thank you, this tutorial adding new insight for me
thank you for the scaling part explained at the end
thank you for these videos!
thanks - you make amazing videos which help a lot
Thank you🙏 you are the best teacher for Revit
REALLY SAD THAT BALKAN DIDN'T MENTION HOW TO CHANGE THE "REFERENCING DETAIL" NUMBER. AS THIS ACTUALLY CRITICAL TO THE DRAWING.
Great tutorial! Do you have a recommendation for what to do when you have a large floorplan that is split up by scope boxes and then you have a section that spans those scope boxes? I can't seem to get it to look correct in paper space, the annotation extents ends up being really large to encompass the head or tail which is on the other side of the building.
THANK YOU
Thank you
6:32 Thank you very much. That had me confused.
Thanks a lot
Hey balkan architect, you make amazing videos which help out Revit users a lot including me. Honestly I think you don’t get the likes you videos deserve.
On your question on why the section extents does not move with he section head, i think its because you might want the section head in a different position away from the extents.
For example when I’m doing working drawings, I like to have section lines beyond my dimension lines but I don’t want the section extents there.
But that said, it should be the same for the elevation too 😅
how do I place a section on a reference plane at an angle with quick pick?
could you tell me please How to merge dimensions in Revit?
only needed last part [break line part] and was avoiding your video fearing the need to watch full 17 min but thank god u had the video already split up.
btw did a like +ty
Hello Marek, how do you make section header show on multiple floors?
I created a section on Ground floor.
But when I go to First floor, I can't find the section header anywhere on the view.
Sir, kindly make video on how to change callout bubbles into text or name.
A couple of problems I have:
Our office drawing numbers are to the British Standard document naming convention, so for example: P6138_12-HOW-A0-GF-DR-A-D1.
That is great on the sheet Title frame but not so good in section heads.
Also the figure in the section head for the detail number is not the same when the section line is viewed in plan and in another section. What does the detail number refer to if not the section.
Maybe you could do one of your excellent videos explaining this?
Oh, I see the detail numbers do work on the sheet, so it is just the drawing number issue and I'm not sure if this is really a section annotation or a title sheet annotation problem.
Most firms reduce their drawing number down to the key fields and then the other parameters are sheet parameters, concatenated in the titleblock.
I have an article about the national annex standard in revit that might help;
www.bimguru.com.au/post/iso19650-revit-sheet-numbering
i was trying to find how to email you with question from your website and there are no info.
how to write text label inside that section head bubble ? can you please explain ?
Dear balkun I am your subscriber can you tell me how to make section numbers 1/a01 like that I means to say just show section number in plan
Hi BA,
Is there any way to put our text in the section bobble? In my country we give names at the sections like, A-A' , B-B'
Thank you!!
Revit does it for you automatically once you place the view in a sheet and name the sheet. I'm looking for a way to do it manually but I other than edit the properties in the sheet view, i dont know
I guess nobody has answered how to put text description of the section.
👌👌👌👌👌👌
How to create family section?
Postovanje za sve klipove vezane za revit.
Mozes li mi reci da li postoji nacin da se izvuce horizontalni presek u revitu?
but why are the floor, section cuts not showing in a hatch mode? help
A small doubt, what's the difference b/w a building section & elevation as section ?
You use the symbol for your plan to show where the section is
I also shared revit tutorials . I hope it's useful for you
Hey, vsauce, Michael here
Fuck it, someone told me how to change the dash line into name.
man this is so basic, i thought you will explain coloring, schema etc in sections
Sections in Revit sucks. U can’t make bended section. You have to create multiple sections and merge them together. I seriously don’t understand why important thing like this isn’t available.
Balkan! now you have nothing remaining ,
so you start making people fool, you're wasting their time with your old topic.