So I just got a job at O'Reilly Auto Parts, I've been there about a month and I come from having no experience with cars. Absolutely none but watching some of your videos I got to tell you this gives me hope for my job, lol thank you
We appreciate you sharing this & great job to have. Keep up the great work & thanks for being there when us DIY’ers are looking for replacement parts. 😎👍🔧🔩
10:40 thank you for this!!! A Buick I was working on was so dirty I couldn’t solve how to remove the hand break cable. On Hondas they slide out sideways. GM goes through a hole.
Been trying to get the long bolt to break loose. Broke one wrench so far. Thought about heating the nut up but afraid it will melt the robber boot the nut rides in.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Any update…?…we are here to help. Heating it may unfortunately melt boot as you mentioned. Have you tried using an impact wrench that applies jolting to bolt? Below is a link to our video tutorial on our impact gun. ua-cam.com/video/aGAPiAvlmqk/v-deo.html Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of a exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Thanks for watching, awesome job making it a DIY project. A few less steps with your approach and sounds like the job was a success. Thanks for sharing your experience. 😁👍
@@isiahmosley6019 Thanks for watching, any update. Although we do not have a video on the 2013, impala parking brake, we have a few videos on other vehicles and we will post those links below. Adjust parking brake: ua-cam.com/video/ktGSu0u4OY8/v-deo.htmlsi=26CyauXz45tO0onC Lubricate parking brake: ua-cam.com/video/6pZCp0vSeD8/v-deo.htmlsi=PVP45vMGyq9NzZeC Parking brake light will not turn off: ua-cam.com/video/CIRhyzDhqnE/v-deo.htmlsi=B3zVAVWD9WHedSXV 🧰
Thanks for watching, great question. As long as you don’t allow fluid to leak out of rear brake lines to a point where it allows air into system upstream, you should be able to just bleed rear brakes. Please keep us posted. 👍🧰
If my caliper is good, can I leave the top bolt attached and swing it up out of the way to get the rotor off or would I have to remove it to pull the rotor?
Thanks for watching, that will be personal preference. If you have the clearance and can raise caliper without damaging it, that’s a great idea. Please keep us posted on your DIY project. Hey if you’re into crypto trading, join our newly launched DIY community platform. Toolboxtoken.com We DIYers need to stick together! 🧰
It did, I know for some taking things apart other than what they expected to take apart can be daunting. That is why I wanted to share how I did it. Plus I didn't have the right sizes handy to take it out.
Check out our DIY Raptor Club store
teespring.com/stores/diy-raptor-club
7
@@deannparsons7264
👍
So I just got a job at O'Reilly Auto Parts, I've been there about a month and I come from having no experience with cars. Absolutely none but watching some of your videos I got to tell you this gives me hope for my job, lol thank you
We appreciate you sharing this & great job to have. Keep up the great work & thanks for being there when us DIY’ers are looking for replacement parts.
😎👍🔧🔩
First time I’ve seen someone unhook battery to do brakes 😂!!!!
Thanks for watching & sharing your thoughts. Hope all is well with you. Let us know if you have any questions.
Enjoy your night rob. 😎👍🔧🔩
That's because you don't want the rotor's to turn the opposite direction
The reason can be because these cars have the power/electric parking brakes
@@mikep.473my 2015 Malibu doesn’t have power electric brakes. Nor does the Malibu in this video.
Mine 2013 has them is the break job the same
That was so clearly presented! No confusion at all
Thank you, that means the world to us. Thanks for watching. 👍
10:40 thank you for this!!! A Buick I was working on was so dirty I couldn’t solve how to remove the hand break cable. On Hondas they slide out sideways. GM goes through a hole.
You are welcome, and thank YOU for sharing this. Buicks are great vehicles.
😎👍
I seen some unnecessary things but still VERY complete and thorough!
Thanks for watching & reaching out to us. Enjoy your day Don.
😎👍🔧🔩
You don't need to remove the bolt on that torsion bar, just use an 18mm wrench on that caliper bracket.
L
I can confirm. You do not need to remove the bolt on the torsion bar.
@@whatthe2458yep. I just did it too.
Been trying to get the long bolt to break loose. Broke one wrench so far. Thought about heating the nut up but afraid it will melt the robber boot the nut rides in.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Any update…?…we are here to help. Heating it may unfortunately melt boot as you mentioned. Have you tried using an impact wrench that applies jolting to bolt? Below is a link to our video tutorial on our impact gun.
ua-cam.com/video/aGAPiAvlmqk/v-deo.html
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of a exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Yeah i just did this today without removing that huge bolt and dis connecting the battery. This is solid information tho.
Thanks for watching, awesome job making it a DIY project. A few less steps with your approach and sounds like the job was a success. Thanks for sharing your experience.
😁👍
I love how you straight to the point no bullshit but still so god dam elaborate 😂💯🙌🏼✅ thanks man! Great video!
What’s up Jose, thanks for watching & sharing this. That’s our goal! 😀👍
Welcome to the DIY Raptor Club, hope all is well.
F.Y. I you do not have to remove the top suspension bolt to remove the caliper bracket, it will clear the bracket so you can remove it.
Thanks for watching and sharing this, much appreciated. 😎👍🧰
Is there any damn video on this website about how to take the parking brake wire off the rear driver caliper 2013 impala
@@isiahmosley6019
Thanks for watching, any update. Although we do not have a video on the 2013, impala parking brake, we have a few videos on other vehicles and we will post those links below.
Adjust parking brake:
ua-cam.com/video/ktGSu0u4OY8/v-deo.htmlsi=26CyauXz45tO0onC
Lubricate parking brake:
ua-cam.com/video/6pZCp0vSeD8/v-deo.htmlsi=PVP45vMGyq9NzZeC
Parking brake light will not turn off:
ua-cam.com/video/CIRhyzDhqnE/v-deo.htmlsi=B3zVAVWD9WHedSXV
🧰
@@DIYwithMichaelBorders i appreciate it
@@isiahmosley6019
We are honored to help and really enjoy interacting with the DIY community.
Does it matter what type of break pad and rotors, if it's an electronic parking break or push parking break?
Thanks for watching, we recommend the ceramic pads, as they are cleaner and don’t leave that dark stain like the cheap pads do.
Question.. if we only replaced the rear calipers on our 2015 malibu do we need to bleed all 4 brakes??
Thanks for watching, great question. As long as you don’t allow fluid to leak out of rear brake lines to a point where it allows air into system upstream, you should be able to just bleed rear brakes.
Please keep us posted. 👍🧰
If my caliper is good, can I leave the top bolt attached and swing it up out of the way to get the rotor off or would I have to remove it to pull the rotor?
Thanks for watching, that will be personal preference. If you have the clearance and can raise caliper without damaging it, that’s a great idea.
Please keep us posted on your DIY project.
Hey if you’re into crypto trading, join our newly launched DIY community platform.
Toolboxtoken.com
We DIYers need to stick together! 🧰
I did it with a wrench broke free then used a shallow but to get caliper off.
Thanks for watching & sharing this Brian. Hope the rest of your DIY project went well. 😎👍
It did, I know for some taking things apart other than what they expected to take apart can be daunting. That is why I wanted to share how I did it. Plus I didn't have the right sizes handy to take it out.
@@briantatejr6465
That’s awesome, & we appreciate that. Any & all helpful info is greatly appreciated.
Us DIY’ers need to stick together!
Bore people with the bleeder of the caliper??? Really?? I know how to do it but you gotta include this in here to teach others right??
2 unnecessary steps:
#1 - disconnecting the battery
#2 - removing the torsion bar bolt
Thanks for watching & welcome to the DIY Raptor Club. We appreciate you sharing your thoughts.
Hope all is well with you and your family. 😎👍
Really? Gonna do breaks and rotors soon
I can confirm you do not need to remove the bolt on the torsion bar
Is 2022 the same ?
Thanks for watching, you will find it to be very similar. 😎👍
why disconnect battery
Thanks for watching, we remove electrical power prior to servicing vehicle for safety purposes. This will be personal preference on your projects.
How long should it take for an experiences mechanic?
next time don't remove important parts. you pretended like it was easy to put the parking brake back in after jump cutting.
Your putting to much work i to that bud just use a wrench to take the braket off 😂
Thanks for watching & sharing your thoughts, hope all is well cody.
To much homily
Thanks for watching, let us know if you have any questions. ☕️
looking for the the black niggative comment😭😭😭
Thanks for watching, any update on your project? Let us know if you have any questions. 👍
Disconnected the battery.... for a brake job.... what a fucking joke.
Thats for the abs shit
clown