How To: GE Water Inlet Valve WH13X10023
Вставка
- Опубліковано 28 лип 2024
- How To Replace: GE Water Inlet Valve WH13X10023 www.appliancepartspros.com/ge...
Symptoms: one or more of the solenoids have failed, washer is not filling properly, body is cracked and water is leaking on the floor.
Tools: Phillips screwdriver, towel, pliers, small flathead screwdriver.
This GE made Washer Water Inlet Valve replaces the following older part numbers on General Electric, Hotpoint, RCA, Sears and Kenmore Washers: 1168712, B004H3XUUS.
Buy the new Washer Water Inlet Valve WH13X10023 here: www.appliancepartspros.com/ge...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros - Навчання та стиль
I like those hose fitting pliers.
Thank you. If we can assist you with anything please let us know!
I fixed mine for zero cost. 1) I determined which solenoid valve was leaking. - 2) I removed the valve assembly. - 2) I removed the plastic debris filter from the inlet. I rotated the rubber solenoid washer with a pick tool. - 3) I hooked up hot water to the offending to the leaking valve. - 4) I hit it with pulses of hot water from the supply hose while... (4. - activating the solenoid switch (120V). 6) After 5 pulses the offending valve quit leaking. Summary... The little rubber washer (spring activated), gets clogged with a bit of debris.
Thank you for the video! I just got this machine and after a few washes, I noticed leaking onto floor. Then, I checked tub and it was filling with water, pretty slowly. I shut off water and ran the spin and drain cycle to get rid of the water. Then, I looked and found your video. I'm hoping this is the problem. Thank you for the help!!!
Thanks, very helpful
How crucial is it to also take a wide stance before performing replacement replacement?
Hahahahhahahaha
THIS VIDEO IS TERRIFIC!!! Thank you!! I did it in about an hour! One funny thing: make sure to shut the main water off before you remove the water hoses. I didn’t and got soaked 🤣
Glad you were able to do the repair. Yes always make sure to turn the water off when doing repairs. If there is anything in the future we can help you with please let us know.