Danke Euch! Habe ich schon gesehen. :-) Wird das neue Software-Update inklusive Daylight-Mode pünktlich zur Open-Air-Session erscheinen? Liebe Grüße nach Berlin!@@NativeInstruments
I am considering purchasing the X1 Mk3, I like the clean look, the size etc . yet I am confused as to how to connect headphone, speakers and Mic . As far as I understand the X1 doesn’t come with audio interface . What do I need ?
Hi! I also have a problem with listening through headphones. Windows, Audio 6 MK2. I'm assigning port 3/4 for monitoring. On the master 1/2. I pressed the preview button on the X1 MK3. There is no sound in the headphones from the front panel. The sound appears only if the fader is set to 100%. But this is not a preview, but a mix signal. The CUE VOL button also does not work on the Z1.
That's hard to fix from UA-cam. If you have technical questions or need to report a bug, please reach out to our Product Support. To create a ticket for a support agent, please choose which category best describes your issue, then use the 'GET SUPPORT' button in the middle of the page. support.native-instruments.com/hc/en-us/sections/15449821909021
Is it possible to do a full gig with a house set just using X1 + external audio interface? Or should I instead invest in a full traktor kontrol S2/S3/S4?
We think so! Check out our blog on getting started with the Traktor X1 MK3 DJ controller: blog.native-instruments.com/getting-started-traktor-x1-mk3/ And our beginner’s guide to DJing with TRAKTOR: blog.native-instruments.com/djing-with-traktor/
@@NativeInstruments that's very informative, tks. The only downside is i've been reading that ni and traktor stopped in time... Which is bad , because at least Traktor isnt a subscription....
Got the x1 mk3 and the komplete audio 6. I set up as described in video but get no headphones cue out. In headphones I always listen “master output”. I tried to setup out 3/4 for output and 1/2 for monitor. It works but this situation is bit strange. Can you help me? Thanks
bought one but i didn't know it didn't have a sound output drive. If I use it with my sound interface and a computer, can I set up a pre-listening? I have a SSL2, but if I need to buy a Z1 to do this, it makes more sense to just have the Z1. if I'm playing in a club I'll play on CDJS and mixers.
The Traktor Kontrol X1 itself does not have built-in audio outputs for pre-listening. However, it can be used in conjunction with your main audio interface or sound card. In the Traktor software, you can set up a cue channel for pre-listening. This allows you to listen to tracks through your headphones before playing them live.
HELLO i have a windows 10 computer ,i have Mackie profx12(mixer), 2 powers speakers and the new Traktor X1 MK3. I set up everything but unfortunately i cant hear the sound .Could you help me or tell me the best way i can kook up everything? Thanks
Sorry to hear you're having issues with the sound. Could you please get in touch with our support team directly so we can take a closer look? You can contact us through this form here: bit.ly/3tph62a
The Traktor Kontrol X1 itself does not have built-in audio outputs for pre-listening. However, it can be used in conjunction with your main audio interface or sound card. In the Traktor software, you can set up a cue channel for pre-listening. This allows you to listen to tracks through your headphones before playing them live.
@@NativeInstruments do you guys have any video explain that ? I have SSL2 interface and I bought traktor x1mk3, but I can't find this. Could you help me ?
For specific questions about setting up your rig, it's best to drop questions in our online community here: community.native-instruments.com/categories/traktor-software-hardware There are many Traktor users there who might have a similar setup and can offer you recommendations!
Please a Video with DVS and only with the X1 MK3 for mixing. Theoretically an Audio-Interface with 2 Stereo-Input (4Channel) and 1 Stereo-Output, Headphone-Out for Cueing (or is a 4x4 neede for Cueing?). Time-Code-Vinyl controlls Track, but still Pitch-Bending possible with the X1, Mixing, Effects etc. with the X1. No additional Mixer needed. For mobile use, only the X1 and the Audio-Interface.
Hello i have some problem, like bug some botton. the volume botton look like is stock and after i push down more time is comes back to life. what you think is a problem of setup or my pc is run out memory? or other? pls help
Experts and staff members are active in our community. Our customer care teams are also available via our help-center if you want to get in touch with us directly. www.native-instruments.com/en/community/ To reach our Customer Care team, please log into your account and submit a contact form for product support. support.native-instruments.com/hc/en-us
Use the X1 + F1 individually as well as with the S3. At $300 lack of a headphone o/p and a sound interface is a very bad design decision. This has been done just to protect the old Z1. The X1 MK3 could have easily been a Z1 with effects or a Z1 MK3. A clear case of when commercials dominate product design choices.
Check out part 2 where Matt shares more advanced DJ setups using the Traktor X1 MK3! ua-cam.com/video/WaFI57fCFzw/v-deo.html
Love that DJ cable solution. Great idea.
A new Z1 mark 2 would partner this perfectly;)
Been using it with Dj cable in some very minimal scenarios and it did its job greatly!! Thank you guys
I have the dj cable too but the volume in the headphone is a bit much.Any way to control?
I'm looking forward to the next part! 😎
Here it is! ua-cam.com/video/WaFI57fCFzw/v-deo.html
Danke Euch! Habe ich schon gesehen. :-) Wird das neue Software-Update inklusive Daylight-Mode pünktlich zur Open-Air-Session erscheinen? Liebe Grüße nach Berlin!@@NativeInstruments
I used an X1 and Z1 together for years. It was a nice set up.
can it connect ipad?or only can use on computer?
For practical tips on how to make the best of your NI setup, please head over to our user community: community.native-instruments.com/categories
I am considering purchasing the X1 Mk3, I like the clean look, the size etc . yet I am confused as to how to connect headphone, speakers and Mic . As far as I understand the X1 doesn’t come with audio interface . What do I need ?
Can we get a new Z2 with and updated gridding system though???
What about the cheaper NI audio interfaces - can you listen the next track with komplete audio 1?
Thanks! Looking forward to part 2 🙏🏻
Thanks for watching! We just released part 2: ua-cam.com/video/WaFI57fCFzw/v-deo.html
Glad i still have my 2 x1 mk1. That design is perfection for 4deck setup
Hi! I also have a problem with listening through headphones. Windows, Audio 6 MK2. I'm assigning port 3/4 for monitoring. On the master 1/2. I pressed the preview button on the X1 MK3. There is no sound in the headphones from the front panel. The sound appears only if the fader is set to 100%. But this is not a preview, but a mix signal. The CUE VOL button also does not work on the Z1.
That's hard to fix from UA-cam. If you have technical questions or need to report a bug, please reach out to our Product Support.
To create a ticket for a support agent, please choose which category best describes your issue, then use the 'GET SUPPORT' button in the middle of the page.
support.native-instruments.com/hc/en-us/sections/15449821909021
To setup with an audio interface part: NI Audio 10 works?If yes how do you set it up?
Hi, do you always need to select how you want to setup your deck settings? Or is it somewhere possible to save these settings? Thank you!
Can you add a mic to any of these setups? I’m assuming the audio interface would be needed?
Is it possible to do a full gig with a house set just using X1 + external audio interface? Or should I instead invest in a full traktor kontrol S2/S3/S4?
For practical tips on how to make the best of your NI setup, please head over to our user community: www.native-instruments.com/community/
it is totally possible
I really like this form factor. Can you recommend this over the Pioneer ddj 200 to begin djing?
We think so! Check out our blog on getting started with the Traktor X1 MK3 DJ controller: blog.native-instruments.com/getting-started-traktor-x1-mk3/
And our beginner’s guide to DJing with TRAKTOR: blog.native-instruments.com/djing-with-traktor/
@@NativeInstruments that's very informative, tks. The only downside is i've been reading that ni and traktor stopped in time... Which is bad , because at least Traktor isnt a subscription....
Got the x1 mk3 and the komplete audio 6. I set up as described in video but get no headphones cue out. In headphones I always listen “master output”. I tried to setup out 3/4 for output and 1/2 for monitor. It works but this situation is bit strange. Can you help me? Thanks
bought one but i didn't know it didn't have a sound output drive. If I use it with my sound interface and a computer, can I set up a pre-listening? I have a SSL2, but if I need to buy a Z1 to do this, it makes more sense to just have the Z1. if I'm playing in a club I'll play on CDJS and mixers.
The Traktor Kontrol X1 itself does not have built-in audio outputs for pre-listening. However, it can be used in conjunction with your main audio interface or sound card. In the Traktor software, you can set up a cue channel for pre-listening. This allows you to listen to tracks through your headphones before playing them live.
how can you adjust the TRIM of the track if the lower knob is set as the fader and the others as EQ?
A you make the left and right engage buttons pulse like a led meter?
HELLO i have a windows 10 computer ,i have Mackie profx12(mixer), 2 powers speakers and the new Traktor X1 MK3. I set up everything but unfortunately i cant hear the sound .Could you help me or tell me the best way i can kook up everything? Thanks
Sorry to hear you're having issues with the sound. Could you please get in touch with our support team directly so we can take a closer look? You can contact us through this form here: bit.ly/3tph62a
thank you very much for your answer
Cool.
When is the 9 for $99 sale?👀
Can I use the interface to pre-listen to tracks that have not yet been played?
The Traktor Kontrol X1 itself does not have built-in audio outputs for pre-listening. However, it can be used in conjunction with your main audio interface or sound card. In the Traktor software, you can set up a cue channel for pre-listening. This allows you to listen to tracks through your headphones before playing them live.
@@NativeInstruments do you guys have any video explain that ? I have SSL2 interface and I bought traktor x1mk3, but I can't find this. Could you help me ?
For specific questions about setting up your rig, it's best to drop questions in our online community here: community.native-instruments.com/categories/traktor-software-hardware
There are many Traktor users there who might have a similar setup and can offer you recommendations!
Please a Video with DVS and only with the X1 MK3 for mixing. Theoretically an Audio-Interface with 2 Stereo-Input (4Channel) and 1 Stereo-Output, Headphone-Out for Cueing (or is a 4x4 neede for Cueing?). Time-Code-Vinyl controlls Track, but still Pitch-Bending possible with the X1, Mixing, Effects etc. with the X1. No additional Mixer needed. For mobile use, only the X1 and the Audio-Interface.
Turntable with Line-Out
Audio Interfaces: NI Audio 6 Mk2, Arturia Minifuse 4, Motu M4, Focusrite Scarlett 4i4, Presonus Studio 68C, Maya 44 USB, Universal Audio Volt 476
If I have 2 pieces mk3 is it possible to dedicate one as a mixer and the other to load tracks and effects? 🤔
For practical tips on how to make the best of your NI setup, please head over to our user community: www.native-instruments.com/community/
Hello i have some problem, like bug some botton. the volume botton look like is stock and after i push down more time is comes back to life. what you think is a problem of setup or my pc is run out memory? or other? pls help
Experts and staff members are active in our community. Our customer care teams are also available via our help-center if you want to get in touch with us directly. www.native-instruments.com/en/community/
To reach our Customer Care team, please log into your account and submit a contact form for product support.
support.native-instruments.com/hc/en-us
Can anyone help me setup with a focusrite audio interface? can cueing..... pffff
Cool, but where new TK z4?😂
So now headphone jacks on the X1 huh? Thats a dealbreaker for me
what's up with that hoodie though? 😍
Use the X1 + F1 individually as well as with the S3. At $300 lack of a headphone o/p and a sound interface is a very bad design decision. This has been done just to protect the old Z1. The X1 MK3 could have easily been a Z1 with effects or a Z1 MK3. A clear case of when commercials dominate product design choices.
Pt is gonna take them 3 years frrr
2nd part when? ;)
Out now! ua-cam.com/video/WaFI57fCFzw/v-deo.html
How about a z1 MK2.
Also I think its a little over priced 😢
👹
Stop this subtitle please.