Thanks for dropping this video bro , not sure if you’re the same guy that commented on Reddit about this but I appreciate you showing the process some guy on tiktok did it but he Gate kept it
@@arielesparza249 no this is the first car I’ve ever did it on. I’m sure the process is the same though. Idk what wires you’d have to tap into to get power though
All mirrors are the same dimensions. Some Q50 mirrors have different technology though (i.e. cameras, heated mirrors). These are just regular, base model Q50 mirrors
hey man i have a question when i connected my drl it was working good for 10 min then stopped working and now my window won’t roll up it’ll roll up in segments hoping for a quick response ,going crazy rn😂
I’d check the power and ground to make sure there’s a good connection for both. As far as the window goes, do the same thing but also make sure the wires aren’t in the way of the window. I know the window will act funny it something is in its way
Literally in the process of this rn I was wondering what else I can cut to make the mirror sit more flush on the car it’s sits ok when I adjust the mirror forward but when I push it all the way back it sits crooked
@@iAlan7my q50 sequential light kit didn’t come with a controller can I still get the daytime running lights and turn working I don’t care about the rgb
@@TheMostHighh if you didn’t get the RGB ones then they won’t come with a controller. They’ll only come with 3 wires (I could be wrong though)? Power (white DRL), ground, and then turn signal
@@iAlan7mine came with 2 sets of cords the 1st set is black white and blue these 3 are all together and then the 2nd set which is an all red cord and then a red/black cord and these are together I assume the red and red/black go into the factory turn signal lights on the g37 and the black and white are for the puddle and go into the stock infinity door light not sure where the blue cord goes
@@iAlan7I also tried to wire the red and black and red to the factory connector but they didn’t come on so o assumed I’m doing something wrong or am mission something
i bought some lights and i cut the wire on the passenger side and it wouldn’t turn on once i wired it and the guy sent me a video saying i fried it somehow. do you think doing it this way messed up something with the rgb?
@iAlan7 puddle lights there's a black white wire which u connected to your door light where the dark blue wire? It's for the the side mirrors stay white while driving
Would be a billion times easier if someone simply designed a revised mirror cap that could incorporate both lights - personally I'd stick with something classy like a turn signal setup for those - otherwise it's probable cause to be pulled over. The puddle lights remind me of my girls BMW - which - they're really useful in darker areas
Yeah very true. But that’s the good thing about going all out on something, you can customize how you want. Like for instance, if I didn’t want the lights on, I could turn them off with the app and if I didn’t want the turn signals, then I could unplug them but I definitely agree with you
YOU KNOW HOW LONG IVE BEEN LOOKING FOR THIS 😆
Yessir! Of course
Thanks for dropping this video bro , not sure if you’re the same guy that commented on Reddit about this but I appreciate you showing the process some guy on tiktok did it but he Gate kept it
Yessir, I’m the guy from Reddit! And yeah dude did the same thing with me too. I knew I could do it regardless, but I finally got it figured out haha
Been waiting for someone to do a video about this,im trying to do it to my 37 sedan
Do it man! I’ve heard you can just use the whole Q50 assembly on the sedan, but don’t quote me on that lol
@@iAlan7 ill definitely try the whole assembly but if not I'll definitely use your method
have you tried it i also got an m37 sedan and want to do it
@@arielesparza249 no this is the first car I’ve ever did it on. I’m sure the process is the same though. Idk what wires you’d have to tap into to get power though
Very nice job bro
Finally someone drop a video
you know what would be sick on the G? those tail lights that were on the SIGMA GTR, the one from that car show. Man that would be insane
Bruh i needed this 🙏🏽
some rgb gtr style custom headlights would be a cool addition
super clean finish 🔥
Thanks man!
Hey man, I was wondering if you could still fold the mirrors after?
Yeah, they do. They’re not notchy as they once were but they’ll fold in and stay
Look amazing 🔥🔥
Can you still adjust the mirrors from the inside of the car
I asked myself is this possible a while ago I’m definitely gonna smack a pair on
Anything is possible with enough money and time my man 😂 hopefully this video helps a little
Gonna try this on a g35 coupe
Bro I’m about to do this but I don’t got rgb I got regular ones was wondering where would you tap in for the DRL
Just tap into the same wire I used in the video. It should give you power!
Bless bro🙏🏾
Will thus work on a g35 08 ? Same body as g37 id assume so
Yo bro you got a wrap in your car ? Or what’s the code for the paint ?
For the signal wire would you just tap into the signal from the headlight?
That works. I used the tail lights because it was easier for me, but the headlights work fine too
Willl a 2017 Infiniti Q50 mirror fit or alll stock q50 mirror will fit??????
All mirrors are the same dimensions. Some Q50 mirrors have different technology though (i.e. cameras, heated mirrors). These are just regular, base model Q50 mirrors
hey man i have a question when i connected my drl it was working good for 10 min then stopped working and now my window won’t roll up it’ll roll up in segments hoping for a quick response ,going crazy rn😂
I’d check the power and ground to make sure there’s a good connection for both. As far as the window goes, do the same thing but also make sure the wires aren’t in the way of the window. I know the window will act funny it something is in its way
would the wiring be the same on a 2008 g35
Not too sure. I would follow a sedan tutorial just to be sure. I know there’s a video of a guy doing the sedan lights on YT somewhere
@ do you have the link if not I’ll look
Literally in the process of this rn I was wondering what else I can cut to make the mirror sit more flush on the car it’s sits ok when I adjust the mirror forward but when I push it all the way back it sits crooked
Yeah just cut a little at a time and test fit every time you cut. Once you cut too much, it’s hard to correct it
@@iAlan7my q50 sequential light kit didn’t come with a controller can I still get the daytime running lights and turn working I don’t care about the rgb
@@TheMostHighh if you didn’t get the RGB ones then they won’t come with a controller. They’ll only come with 3 wires (I could be wrong though)? Power (white DRL), ground, and then turn signal
@@iAlan7mine came with 2 sets of cords the 1st set is black white and blue these 3 are all together and then the 2nd set which is an all red cord and then a red/black cord and these are together I assume the red and red/black go into the factory turn signal lights on the g37 and the black and white are for the puddle and go into the stock infinity door light not sure where the blue cord goes
@@iAlan7I also tried to wire the red and black and red to the factory connector but they didn’t come on so o assumed I’m doing something wrong or am mission something
i bought some lights and i cut the wire on the passenger side and it wouldn’t turn on once i wired it and the guy sent me a video saying i fried it somehow. do you think doing it this way messed up something with the rgb?
this the video he sent me on how to do them. ua-cam.com/video/xfBEan1AKfg/v-deo.htmlsi=5DSDsUnMm6z-IT2Y
No I don’t think it’s fried. Double check the wiring but check the fuse just in case
@@iAlan7do yo think cutting the wires messes with the rgb and the connection to the app? because it also has a special animation when you turn them on
What about the blue wire for the driving light? Where u put it?
@@nevergiveup2365 which blue one are you referring to?
@iAlan7 puddle lights there's a black white wire which u connected to your door light where the dark blue wire? It's for the the side mirrors stay white while driving
@@nevergiveup2365 can you provide a timestamp from the video? I don’t think mine had that
@iAlan7 my fault forgot u have the rgb not the regular one
@@nevergiveup2365yeah bro. It may just be a power wire though. Try putting it in the window switch like I did
How many screw I have to put for each mirror
@@mohammedmanasra-x6k I think it’s in the video. I can’t remember how many I put but it wasn’t 3
where did you get the front grill emblem??
I have a video on it. Alibaba
Will it work for g35 2007
@@kyle_visuals5891 it should. Wire colors may be different though
@ appreciate it , needed a new look on the g , never seen one out here with indicators on the mirror cap💫 🔥
Where did you buy wire from?
Amazon. Just messaged you back on IG!
Did you edit this using Adobe Rush?
Dude I tried all night to get it to work through Rush but I could never get it to export. I used Power Director though
where you get the q50 mirrors from?
I got one locally and bought the other on eBay
@@iAlan7 will be trying! thank you for sharing a tutorial with us. i’ll be dropping a follow
Does the cameras work?
No. I got base model Q mirrors without the camera
Would be a billion times easier if someone simply designed a revised mirror cap that could incorporate both lights - personally I'd stick with something classy like a turn signal setup for those - otherwise it's probable cause to be pulled over. The puddle lights remind me of my girls BMW - which - they're really useful in darker areas
Yeah very true. But that’s the good thing about going all out on something, you can customize how you want. Like for instance, if I didn’t want the lights on, I could turn them off with the app and if I didn’t want the turn signals, then I could unplug them but I definitely agree with you
Will it fit a 370z?
idk
Clean G
Nice pride mirror caps
Thanks my brotha. Tis the month 🏳️🌈
Look tufffff
Thanks man 🤝🏾
How many screw I have to put for each mirror