How to Build Porch Stairs | Ask This Old House
Вставка
- Опубліковано 23 вер 2016
- Ask This Old House general contractor Tom Silva builds a safe and solid set of porch stairs. (See below for a shopping list, tools, and steps.)
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse
Tom Silva removes an old set of porch stairs and builds a new one. The new stairs are a safe, solid, and up to code. One of key the changes included cutting the stringer on an angle to streamline the steps.
Shopping List for How to Build Porch Stairs:
Pressure-treated 2x6s [amzn.to/31iPNmM] and 2x12s [amzn.to/32yA6rO], for building the new stairs
3-inch deck screws [amzn.to/2Q1My1V], to fasten together the stair parts
8-inch structural timber screws [amzn.to/2Q3BzVD], for securing the staircase to the house
3-inch masonry screws [amzn.to/2Q6HU2N], to fasten bottom frame to concrete walk
PVC trim board [amzn.to/2A98f5l] and plugs [amzn.to/305jGFT], for making the risers and trimming out the stringers
Composite deck boards [amzn.to/2LpxJBT], used as stair treads
Welded-steel handrail [amzn.to/2N8S6W9]
Composite railing system [amzn.to/2Q76iRL]
Tools for How to Build Porch Stairs:
Wrecking bar [amzn.to/2Q3uxQQ], to pry up the old stair treads
Reciprocating saw [amzn.to/2LqtLZM], for cutting out the old staircase
Framing square [amzn.to/2Ablt1r], to lay out stair stringers
Reciprocating saw [amzn.to/2LqtLZM], for cutting out the old staircase
Circular saw [amzn.to/2zWYuY0], to cut lumber
Jigsaw [amzn.to/2MUH4Uo], for notching stringers
Impact driver [amzn.to/2LraKFj], for driving screws
Hammer-drill [amzn.to/2N8APfD], to drill into concrete
Miter saw [amzn.to/2NRDqdo], for crosscutting lumber to length
Socket [amzn.to/2PLTsrN] and ratchet wrench [amzn.to/2NWDIjt], to tighten hex-head fasteners
Steps for How to Build Porch Stairs:
1. Pry off the treads from the upper step to gain access to the tops of the stringers.
2. Use a reciprocating saw to cut through the top end of the stringers, freeing the staircase from the porch.
3. Remove and discard the old staircase and any leftover debris.
4. Use a circular saw and jigsaw to cut six new stair stringers from a pressure-treated 2x12. Cut four steps into each stringer.
5. Screw a pressure-treated 2x6 to the existing porch frame to provide extra support for mounting the staircase.
6. Space the six stringers 16 inches on center, then fasten a 2x6 across the tops of the stringers. Attach the 2x6 with 3-inch decking screws.
7. Screw a 2x6 across the bottom ends of the stringers, then attach a 2x6 toekick to the previously installed 2x6.
8. Set the stringer assembly against the porch and secure it with several 8-inch structural screws.
9. Use a hammer-drill to bore screw-pilot holes through the bottom 2x6 and into the concrete walk.
10. Fasten the bottom of the staircase to the walkway with 3-inch masonry screws.
11. Cut four risers from PVC trim boards.
12. Attach each PVC riser to the stringers using specially designed screws. Conceal each counterbored screwhead with a PVC plug.
13. Cut and attach PVC trim boards to outer surfaces of the stringers on the left and right end of the staircase.
14. Cut stair treads from composite decking; screw the treads to the stringers.
15. Install a welded-steel handrail, making sure it’s between 34 and 38 inches above the nose of the stair tread.
16. Assemble a composite railing system, which includes a handrail and balusters, to fit alongside the welded-steel handrail.
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers-and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free.
bit.ly/2GPiYbH
Plus, download our app for streaming full episodes to your connected TV, phone or tablet:
bit.ly/34RYEP5
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
bit.ly/AskTOHTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
bit.ly/AskTOHIG
For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldHouseWebsite
How to Build Porch Stairs | Ask This Old House
/ thisoldhouse - Навчання та стиль
Tom is great! Reminds me of my dad. He built everything perfect and made it look easy. After he finished he would say “Just like Fort Knox”.
@7:39 the toe kick was installed crooked.
@@theupscriber65 No, it looks good. Solid job. Maybe stick to commenting on funny cat videos?
I usually say; “like a glove” or “good enough for government work” lol
Good enough for the girls [insert name] dates. Lol
Tom Silva was born a master carpenter.
Tom Silva has been 60 years old for 40 years
NickWit lol
Youre right!
He doesn’t age past 60. EVER.
According to Google he was born in 1947. Currently in 2020 he is 73.
Old Blackstock yeah, thank GOD you showed up!
Without sounding to corny…You guys are a national treasure and real humanitarians. Thank you!! For the last 40 yrs. I am 61 and grew up with your show and I have loved would working and repair and building since Ive seen your show.
The viewing public has been so fortunate to be served for so long by Tom Silva, Norm Abram, Richard Trathewy et al. Not only their abilities, but their attention to detail and safety abounds. We are lucky to live during a time we can all benefit from their knowledge.
As a 67 yo bricklayer/master builder from the UK, I'm pleased to see an older man passing his hard-won knowledge on to the next generation, while helping out a member of his community by doing the job correctly.
The rules (codes) regarding steps were created long ago, by builders, and are almost exclusively concerned with the safety of the end-users, ie the public. If steps or stairs have odd-sized risers there is a trip hazard. We might cause it a stumble hazard, as, if you are descending a strange flight of stairs with 7" risers and then encounter a 9" riser, then you are almost sure to lose your balance and fall forward. With a 5" rise in the mix, then there is a danger of jarring your foot and falling backwards. All this is only made worse in low light conditions. I might mention the elderly, the kids and the disabled as people who these rules protect especially. This is not "bs" unless it stands for building sensibly.
A big thanks from me to the team who are presenting This Old House. More power to your elbow!
should read "... We might CALL it a stumble ..."
You can correct typos in your comments. Just click the three dots in the upper right corner of the comment.
That next generation is just a TV personality. He's not absorbing any of it.
@@sleddy01 Kevin is far better than Bob Vila was. At least Kevin helps
Bob Vila knew how to do this stuff. Kevin was a guy who called them into his home to fix stuff for him.
Why are this videos so addictive?
Nova Capital you right bro
Because we're men, we like to built stuff, use power tools, and hammers. The Tim Talor effect.
Matt e
Matt dont know
Watching Tom display his expertise is what is addicting to watch!
I love how he sees that the stairs are uneven, not conducive to prothestics, and illegal. His mind is sharp. Good stuff.
And the script is even better....
Different riser heights are not conducive to anyone. Even able-bodied people will trip because it’s a natural rhythm to climb stairs that have the exact same riser height. When you have something wonky like this which is all over the place in many homes you have an invitation for a fall.
@@theloneviking9145 Agreed.
Great Job and thank you from America for providing this to her.
Oh my. I would get caught on the bottom loop. My clothes, my purse, anything. Thanks for such an informative video.
You guys are amazing! It’s great that you guys helped out a member of the community like that. Keep up the wonderful work!!!!
Tommy: Alright let's get started.
Kevin: Tools!
Solid response my man.
Tom Silva your the best...
I am a licensed general contractor and Civil Engineer and Tom Silva is the best GC I have ever seen, bar none. His breadth of knowledge is just breathtaking and his hands-on skills and blue collar skills are amazing. All really good GCs learn to do most of the trade work themselves because they end up having to do it on jobs when they can't get trades in to do the work. Silva is an example of that.
No you’re not
Great, but we never got to see the layout of the stair stringers !!!!
Love to see such videos from this old house.. helping a person in need and creating knowledge base.. amazing
All of these people on TOH and ATOH are great presenters. Clear, concise. Just great. But Tommy I think is the best. His pacing, his cadence, his intonation, all of it. Just so clear and communicative.
I really like the trick when Tom clamps a piece of wood to the framing square. Makes for exact measuring.
I like how they took it one step at a time
Bless you Tom.
Made me happy that they helped someone in need :-)
Great job guys. Wish I saw how bottom post was mounted.
Absolutely professional and first rate teachers !
Nice job Tommy & Kevin , I'm sure this woman really appreciates you rebuilding her some new & safer stairs with some handrails on both sides ! 👍😀🛠
That Festool 90-degree attachment is a life saver with some projects. Glad to see it in use on here!
I love watching Tom Silva, so skillful and experienced. I hope he is passing his sage wisdom on to others.
You literally just witnessed him doing that, you melt. Jesus, not too bright, huh?
Wow i could be watching your videos all day long great job thank you
I like the idea of the angled riser! thanks!
I like this show so much...I'll be 18 soon but I've always watched these kind of shows since I was very young.
I’m a little older than you...ok a lot.... I’ve watched this show and norm abram my whole life
Michael Lebert smart young man.
Michael Lebert zxcxv c
I'm 31 now but I started watching this show since I was 13 or so. I'm not sure if this show is still running on TV with new episodes but I still like watching episodes on UA-cam.
Same for me. So much so I got into construction. If you think its satisfying watching this, the feeling of completing something yourself is 10x better!
These guys from these OLD House is heaven sent Lol
Thank you for helping this women you guys are the best
Love u guys been watching you since I was a small boy and still watch today at 36 I've learned so much and continue to learn Everytime I watch thank you for all your great instructions and tips...keep up the great work....
When Tommy is doing anything with tool he exudes a confidence that is easy to see
I loved all this videos, I will love to have you guys working in my house
It is just a joy to watch your shows ∞❤✟✡✟
I like the gloves Kevin is wearing, my wife has a pair just like them
@James Rogers
😄
Your wife has man hands?
So your wife is a trans ?
Tom is the Best carpenter
God I love this channel. Explanations are so simple.
Tom Silva Excellent Job AMEN
I've watched Mr Silva since Bob Villa was hosting. I've always admired his skill and knowledge. What I wouldn't do to have him help me with repairs on my house and Jesse James to help with repairs on my car!
A great program which I love to watch general home construction.
Rock on guys always good stuff from you.
Very nice! Those stairs look great, and should last another 100 years or so. That custom-built handrail is the cat's meow.
Blast from the past. I love how they always make it look so easy. It's never that easy....
I would love to have anything built by these guys!
They did a great job!
Excellent work you guys!
Awesome job guys.
Awesome! You make this type of project look easy!
Well done guys
My home was built in 1934 and my front door is 36" with 2 sidelites making it 6" wide. My stairs I built are 6" at the top and 10" at the bottom with curved side stringers and curved handrails. I had to make the curved stringers on a jig as they are not just an arc but in fact they are helical. Every place where a balister attaches is plumb. After I built the main stringers I transferred the cuts to the curved stringer and finished the treads. Then I built the curved handrails in place making them 2 1/4 " wide by 1 1/5" tall, I used pressure treated 1/8" stock and poly waterproof glue and galvanized trim nails to layer them. Then waited till the following year to seal them and paint. Right now they enter onto my 8' X 30' screen porch but I want to close the porch and extend my home into this space.
Working a project like this with Tom Silva would be a dream come true.😭
You guys are like artists very talented.
That right there is the standard great work!
The masters at work love these guys
Nice work filling in the rail
Hi peoples, you should do more for the disabled, elderly and poor. Cheers for the video, it brought a smile to my face being disabled myself :-)
Awesome! Wish I could do this stuff.
Wouldn’t it be awesome to have him build your home ❤️❤️❤️ I can’t find anyone like him who does what he does ! He should have started a training school.
I know it is just probably me, but I don't like attaching anything like stairs to a ledger or joist without a spacer in between. I have learned the hard way over years attaching wood on wood; water gets between two pieces of lumber and the end result is usually wood rot.
NICE job, Tommy !!!!
The hand rail is beautiful
Thank you tom
5:20. Nice plug for Boston Welding
Fantastic job!
The man is a Legend.
as usual very great information and work team
That composite material is called Trex. We used it to build the back deck of my foster family's home.
I love how Kevin is always willing to help and get his hands dirty instead of just talking about it.
Angle cut on the stringer was a good idea to eliminate the grabbing point.
buen trabajo me gusto.
Great job guys🙏
Tommy your the best..👌
great job guys
You can see Tom heart sink when she said she has tripped on the overhand. You can see the “I’m too late!!! THEY WOUDLDNT LISTEN!!!!” In his soul
im 13 and i know alot about carpentry and i this is where i learned it all
Are you sponsored by festool?
@@gangisspawn1 no
I like how they had her test the handrail.
loved the video but you need to do another one showing how to calculate and cut the stringers in that angle. All I find are video's showing the 90 degree angles and this looks great and I would love to make one for my deck.
KatCasto they have videos on how to calculate stringers the right way just type how to calculate stringers on this old house...love these guys been a fan for over 25 years...
I actually have an app on my phone,I know cheating but it lets you try out multiple rise and run combinations for the best fit
It is surprisingly difficult to find a good video or article explaining how to cut these types of stringers. This is the best I could do:
The stair terminology for this type of cut is called an undercut.
If you search for “How to Build Stairs (Larry Haun)” in the UA-cam search bar, you can see how a professional carpenter does it. He will take you through the process for building stairs and show you how to make the calculations for building stringers. He doesn’t really explain how to make an undercut, but he will show you.
ua-cam.com/video/dR_zvOeCFGA/v-deo.html&feature=share
If you visit stairs4u.com/code/maximum_angle_of_the_stair_riser.htm, you can learn more information about undercuts by Greg Vander Berge. From what I gather, he is a contractor, specifically a professional stair builder. He puts out a lot of educational material on the do’s and don’ts of professional stair building, including several books.
And If you visit Greg’s UA-cam channel “stairbuilding” and watch the video “Examples of Possible Stair Building Code Violations - Tread Nose Projection,” you can better understand how to design stringers with an undercut while working within the parameters of the International Building Code (IBC).
ua-cam.com/video/FGxzI8Aa1wI/v-deo.html&feature=share
Tommy is just.... sick with it.
Man this old house has every video
nice job guys
Lovely decor old house wood
i always like to learn from you. means every day one episode .
Pro Job great work!..
Incredible
Old timers are always righteous!
Great job 👍👍👍
Nice job
Awesome.
another excellent video
Top job guys
Nice job fellas
Hey guys you know I don't know this person at all but she seems extremely nice and I just wanted you two to know how much other people appreciate what you are doing for others and I/we and we meaning my family friends and employees we say thank you so very much for helping wonderful amazing awesome beautiful families and individuals out there in our beautiful country I've been a general contractor for over 35 years and I really would like to find out how I can get into this helping others if you'd share with me some information myself and others would really really appreciate it thanks for everything and thumbs up my friends
Triple Dekkah!
Good to see Kev chipping in
their drills always go vrrrprptttt
Great!
Laying out stringers works best when you mark the diagonal, rather than eyeball the square. I see very few people do this. For example, if you're building stairs based on a 33" total rise, you'd build 5 risers at 6 5l8". Because a calculator naturally rounds this number, your end result would be a total rise of 33 1/8", which would put you over. By calculating the diagonal which doesn't round the number, you'd hit 33" even.
Awesome 👏
Most people measure twice and cut once. Tom Silva looks at a project and breathes good judgment into it.
I measure once, cut twice and then its still to short!
@@MrJamesBanana really
@Kiss Myass yup. You know it's right because I did it twice
James Banana I cut twice and then I measure . But at least I have a good reason for my fails lol