NC Miata Repairs! || How to Replace a Valve Cover Gasket

Поділитися
Вставка
  • Опубліковано 4 січ 2024
  • In this episode of the NC Miata track build series, I will be showing how to replace the valve cover gasket on all NC Miata models. Mine was failed, determined by oily spark plugs found in the last episode. So this time around, we're getting the engine sorted out and track ready!
    See episode 1 of the build series here:
    • NC Miata Track Car Pow...
    Be sure to subscribe to stay tuned for the rest of the series! Thanks for watching and have a great day.
  • Авто та транспорт

КОМЕНТАРІ • 18

  • @johnmeth1
    @johnmeth1 4 місяці тому +1

    About to take on this job. This well orchestrated video gave me all the confidence I need to knock it out in a hour or two. I’m a visual learner and if I see it I can do it. Appreciate the insight at the beginning and end of the video but no bs during the whole process.

    • @running2redline
      @running2redline  4 місяці тому +1

      I’m glad you found this useful. It’s plenty doable, just take your time and be careful with the metal bracket on the backside of the engine (closest to cabin) as it’s easy to drop a bolt and there isn’t much room there. Good luck and thanks for watching!

  • @slanger2563
    @slanger2563 День тому

    Very nice video! Not many NC anything video's out. I just ran my 07 NC PRHT Hot and got at least the Head gasket. Ill get the head checked. Can anyone help me find a video of removing the Head on a NC please 🙏🏼. Thank . Again very thorough informative video!

    • @running2redline
      @running2redline  13 годин тому

      Glad you got something out of this! Haven’t seen much on a head gasket job unfortunately, good luck with the repair

  • @basileczajkowski3236
    @basileczajkowski3236 19 днів тому

    Great video! I'll be doing mine soon so it's a lifesaver. Quick question : how long did You wait for the gasket maker before You put the vakve cover back on?

    • @running2redline
      @running2redline  19 днів тому +1

      Thank you and good luck! I waited about 90 minutes for it using the Right Stuff gasket maker which recommended that set time. If you use a different gasket maker it should specify the set time on the back directions section of the bottle.

    • @basileczajkowski3236
      @basileczajkowski3236 19 днів тому

      Thank You!

  • @BrooksWildlife
    @BrooksWildlife 2 місяці тому +1

    At 1:02, what is that sensor called? Mine is leaking.

    • @running2redline
      @running2redline  2 місяці тому +1

      It’s actually the Variable Valve Timing Solenoid. My solution to any leakage is in the video at 6:02

    • @BrooksWildlife
      @BrooksWildlife 2 місяці тому

      @@running2redline Thank you!

  • @kokrb
    @kokrb 5 місяців тому

    Do you consider using polyurethane bushings?

    • @running2redline
      @running2redline  5 місяців тому

      Certainly something that might be worth doing if the stock ones are as soft as I suspect. Probably something I want to evaluate on track first. Thanks for watching

  • @analece9646
    @analece9646 2 місяці тому

    how did you take the front screw off at 3:02. my 8mm won't reach it

    • @running2redline
      @running2redline  2 місяці тому +1

      I think it was a deep well socket to get enough depth over the stud. I’m only 90% sure though because my hands are in the way lol

    • @slanger2563
      @slanger2563 День тому

      Yes​@@running2redline

  • @pututski6968
    @pututski6968 5 місяців тому +1

    HIgh quality video man! I will be replacing mine very soon!