Topens A8 Troubleshooting No response when remote is pressed (solved)

Поділитися
Вставка
  • Опубліковано 17 сер 2021
  • Topens A8 no movement fix
    www.bensound.com/ Dreams
    Disclaimer: All troubleshooting were carried out by a professional access control technician and the results may vary if the troubleshoots isn't carried out correctly by an appropriately qualified persons. We are not responsible for any damage or injury to persons or equipment during this process. Be sure to observe all safety precautions.

КОМЕНТАРІ • 16

  • @automateyourgate
    @automateyourgate  2 роки тому +2

    PLEASE PLEASE...SUBSCRIBE TO MY CHANNEL HELP ME HELP OTHERS SOLVE PROBLEMS WITH THEIR GATE OPENER

  • @markjacobsen8335
    @markjacobsen8335 2 роки тому

    Glad to find something that has my opener. Currently does not engage at all. I will try what you showed.

    • @automateyourgate
      @automateyourgate  2 роки тому

      disable the sensors using the dip switch and remove the wires to check as well. if you are operating on battery make sure the battery voltage is above 12v

    • @markjacobsen8335
      @markjacobsen8335 2 роки тому

      @@automateyourgate Hey thanks for replying! I am really novice with this system and cannot figure out how to remove the wires. I see no release mechanism there, and they do not just come out with a little tug. Also, the manual does not tell me what the dip switch is.
      The unit runs on A/C. I see no battery backup.

  • @Multidimensionaltravel
    @Multidimensionaltravel Рік тому +1

    Good job thanks!

  • @stevelitchfield7609
    @stevelitchfield7609 Рік тому

    Hi have you found a way to extend the remote antenna range? As the antenna is currently inside the control box. Thanks Steve

    • @Multidimensionaltravel
      @Multidimensionaltravel Рік тому +1

      You need to know the frequency. Then buy an antenna and hook it up. I have also used a multiple band antenna which works fine. If you wish for more info say so and if this fine person that showed us how to check non functioning board does not offer it I will.

  • @CharlesArthur-hv6fk
    @CharlesArthur-hv6fk 3 місяці тому

    Pls am having issues on the board

  • @CharlesArthur-hv6fk
    @CharlesArthur-hv6fk 3 місяці тому

    How to reset 1800 board

  • @DustinPadgett-yb6xi
    @DustinPadgett-yb6xi 6 місяців тому

    My parents recently bought me this gate. The A8. I’m having trouble getting it goin. If I were to just run the power to an outlet what will I need other than the gate arm and control box

    • @automateyourgate
      @automateyourgate  6 місяців тому

      Did you program the remote to the control board?

  • @mikechamplain2425
    @mikechamplain2425 6 місяців тому

    Dont buy Topens model...no service department

    • @automateyourgate
      @automateyourgate  5 місяців тому

      Once you send them an email or a private youtube video. They will respond to you atleast thats how I got their attention

  • @starstar6095
    @starstar6095 10 місяців тому

    Did you program it? 😂😂 I didn’t see it.