Thanks for the video, but have watched many times and cannot understand what you are connecting to what? Where's the computer? That last black and yellow connector is from where?
Wait i have to watch it myself i forgot...watch the other video in the meantime that is a better way of connecting the two as AP and receiver! The wds bridge sucks
From what I understand it auto negotiates bandwidth, that might explain why I can't get past 10mbps, although its solid and works. I don't want to take these down again to test. I think on the table beside each other the speeds were far greater. My separation is only about 300 feet. I would have thought I would maintain wider bandwidth and speed. Am I correct? Very little info available. Wonder about the claimed distance and speeds they show, a little exaggerated maybe?
Can we have 1 Host (at router) and this Host communicates with three Clients (each Client connects to one ip camera). Basically, I buy 2 sets, which comes with 4 pieces and converts one CPE to Host and the other 3 CPE to Client. The cameras are located about 300M away and separated from each other by about 20M apart?
Yes you can do that.I have done this not with this brand but another. One IP and on every 150m repeater. (That is how you can provide a whole city with network)
Hello. I have a repository that I want to install an nvr system. the repository has no internet. can you tell me the settings to send internet to the repository from another point I have internet?
Reset the units and watch the other video it explains how to set it manually from the software ( revert your ip when you're finished in the pc..dont forget to out it back to auto)
@@micinum I read somewhere it said they would work right out of the box without changing anything. I am on my 2nd set (first stopped pairing and would not pass internet) The new set will not pass internet from 1 unit to the other (about 200' apart, clear line of site) Do you have any idea whatsoever I need to do to make them work?
Hello If I use the Access Point TP-LINK TL-WA801ND_V1 Wireless N300 and use a 2400 WiFi parabolic dish instead of the Omni Directional Antenna, how far can I get the frequency 100% without loss of quality ? ? ? For outdoor long range point to point use.
You lost me at .42 You showed two different colored ethernet cables. One grey one black. If the grey one is from your modem or router "internet", where is the black one coming from or going to?
I did the clip years ago and these still function and they are on 24/7. Weird right. Anyway, it's simple, these get power from those adapters and the only purpose of these adapters is to give power to the cpe. So one cable will go to your modem the other will go to your pc or switch. Get it? Now to set them up you must somehow get inside. One option is through wifi the other is with lan cable. There are 2 videos on my channel for these cpe watch the other one it works better that way. I was losing connection like this.
I must be a real dummy because I can't understand your video. Why don't you answer questions that people ask that way we might understand what you assume we know. If you want to post an educational video make it so we can understand. You have two wires coming out of the power supplies but no explanation where they go except something about blowing up the units. If you cant make a proper video then take this down.
А я наоборот, настроил блин в режим репитера а обратно в wds никак. Сколько не сбрасывай все равно в репитере. Хост ap mode а клиент repeater mode. И все, во вкладке wizard нет выбора режимов
@@chrisstyles5955 i have another video of tplink...check it out something might be more similar...the manual usually explains everything step by step. First make it work on your mobile phone, get a signal there and than continue on the second device...remove problems one by one.
I am SO dissatisfied with these. I'm on my 2nd set (1st faulty, wouldn't pair) CANNOT get internet to pass thru these. Instructions and support suck. Just about ready to return for refund.
This video helped me a lot. Not sure why some people are just so ungrateful. They get free instructional video yet they still complain... Thanks Branislav SS!
Thanks for the video, but after 3:38 I didn't understand what you where showing. Can you please add more info to the vid perhaps as captions?
I wish there was a video that actually shows how to use these.
Thanks for the video, but have watched many times and cannot understand what you are connecting to what? Where's the computer? That last black and yellow connector is from where?
Wait i have to watch it myself i forgot...watch the other video in the meantime that is a better way of connecting the two as AP and receiver! The wds bridge sucks
This is for dummies? So what’s the level below this? How is this so complex
Where do the other 2 cables go?
From what I understand it auto negotiates bandwidth, that might explain why I can't get past 10mbps, although its solid and works. I don't want to take these down again to test. I think on the table beside each other the speeds were far greater. My separation is only about 300 feet. I would have thought I would maintain wider bandwidth and speed. Am I correct? Very little info available. Wonder about the claimed distance and speeds they show, a little exaggerated maybe?
Would have been nice it the poster has read posts about his/her videos. Sure would help people.
Try a different channel.
what is CPE Stands for?
where i can see, the signal strengh?
Honestly i forgot it's been a lot of years since i recorded this video
How do you connect. Both Kuwfi devices. Because. I’m only able to connect one. And I want to Conect the other one To the router by lan port .
a question, can i use it as a slave the two kuwifi to connect two person of my wireless internet
?
Yes
I have 50 mega to download and I want that person to run 3 megabytes, another 5 megabytes and another person plus 10 megabytes. It can?
There is no option for selective bandwidth limitations. It will auto negotiate the available 50mbps...
At 2.39 does the computer have to be connected to the internet by ethernet and does it have to stay connected by ethernet?
Can we have 1 Host (at router) and this Host communicates with three Clients (each Client connects to one ip camera). Basically, I buy 2 sets, which comes with 4 pieces and converts one CPE to Host and the other 3 CPE to Client. The cameras are located about 300M away and separated from each other by about 20M apart?
Yes you can do that.I have done this not with this brand but another. One IP and on every 150m repeater. (That is how you can provide a whole city with network)
@@micinum Thank you. Much encouraged.
Can I connect 3 device together?
One AP and on that AP you can connect how many devices you like.
Bro… if you’re gonna do a video ya gotta speak to explain what your doing.
Hello. I have a repository that I want to install an nvr system. the repository has no internet. can you tell me the settings to send internet to the repository from another point I have internet?
It's hard to explain over one comment, ask any IT technician he will take care of it in no time. Ask any computer firm that does networking
I have internet on the master but nothing on the slave
Reset the units and watch the other video it explains how to set it manually from the software ( revert your ip when you're finished in the pc..dont forget to out it back to auto)
@@micinum I read somewhere it said they would work right out of the box without changing anything. I am on my 2nd set (first stopped pairing and would not pass internet) The new set will not pass internet from 1 unit to the other (about 200' apart, clear line of site) Do you have any idea whatsoever I need to do to make them work?
Where is the other video?
ua-cam.com/video/ylRIDSHw25w/v-deo.html
Le système fonctionne sous Android ?
yes
Hello
If I use the Access Point TP-LINK TL-WA801ND_V1 Wireless N300 and use a 2400 WiFi parabolic dish instead of the Omni Directional Antenna, how far can I get the frequency 100% without loss of quality ? ? ?
For outdoor long range point to point use.
I have no idea, these are weak you will be happy if you have 50mbps on 100meters.
You lost me at .42
You showed two different colored ethernet cables. One grey one black. If the grey one is from your modem or router "internet", where is the black one coming from or going to?
I did the clip years ago and these still function and they are on 24/7. Weird right. Anyway, it's simple, these get power from those adapters and the only purpose of these adapters is to give power to the cpe. So one cable will go to your modem the other will go to your pc or switch. Get it? Now to set them up you must somehow get inside. One option is through wifi the other is with lan cable. There are 2 videos on my channel for these cpe watch the other one it works better that way. I was losing connection like this.
I must be a real dummy because I can't understand your video. Why don't you answer questions that people ask that way we might understand what you assume we know. If you want to post an educational video make it so we can understand. You have two wires coming out of the power supplies but no explanation where they go except something about blowing up the units. If you cant make a proper video then take this down.
Occorre tecnico informatico.😪
como subir nivel de seńal
Would this be good to get a camera working from a shed 100m away?
Yeah no problem at all. On 200 meters i get about 35mbps (about 4MB download and upload) camera needs not more than 0.5MB...
@@micinum I've ordered some CPE80SR . Guessing it's the same set up.
@@mclarenrob2 they are all the same...same princable applies...if you screw something up you can always reset the device...
H stands for Host and C stands for Client. Master and Slave arent PC
Как настроить в режиме репитера
А я наоборот, настроил блин в режим репитера а обратно в wds никак. Сколько не сбрасывай все равно в репитере. Хост ap mode а клиент repeater mode. И все, во вкладке wizard нет выбора режимов
?
FOR DUMMIES? This is far from "for dummies"
Do exactly as you see in the clip and it will work
@@micinum Nah bro, I bought a different brand, and the software is different. Feel free to be a dick tho
@@chrisstyles5955 i have another video of tplink...check it out something might be more similar...the manual usually explains everything step by step. First make it work on your mobile phone, get a signal there and than continue on the second device...remove problems one by one.
First; why do people do instructional videos without talking. Don't waste your time doing this please or anyone else that does this stupid stuff.
Maybe they dont speak English, but are still trying to be helpful.
I am SO dissatisfied with these. I'm on my 2nd set (1st faulty, wouldn't pair) CANNOT get internet to pass thru these. Instructions and support suck. Just about ready to return for refund.
This video helped me a lot. Not sure why some people are just so ungrateful. They get free instructional video yet they still complain... Thanks Branislav SS!
@@jbatchseven thats just how today's world is.
How do you connect. Both Kuwfi devices. Because. I’m only able to connect one. And I want to Conect the other one To the router by lan port .