How To Make A Mallet With Secret Built In Compass

PLANS AVAILABLE HERE
patricksworksh... 👈
In this video, i build a new style tool 2 in 1 you might say a mix between a great mallet and an awesome compass for laying out circles
you tell me what you think in the comments below
SPECIAL THANKS FOR THE LEATHER SHOUTOUT TO My GOOD FRIENDS :
Ronnie Sutton ---
He has a youtube channel check out his stuff
/ @itsawoodthing
AND MY GOOD FRIEND
NICK FERRY
go check out his website
nickferry.com/
---------------------------------------------------------------------
Amazon links ( Affiliate)
--------------------------------------------------------------------
STUFF I USED----
leather-amzn.to/2tvqNbp
countertop bolts-amzn.to/2sD1mER
sandpaper-amzn.to/2sWqdGO
paraffin wax-amzn.to/2sT7UBi
mineral oil--amzn.to/2tQh2DZ
glue-amzn.to/2tvMR5H
-------------------------------------------------------
TOOLS I USED :
lazy susan planner bearing - amzn.to/2sjwR5c
scroll saw blades-amzn.to/2sT1IZZ
BANDSAW BLADE-amzn.to/2ssQStk
DRILLS-amzn.to/2sWg5hf
impact drill--amzn.to/2sXQDHR
TABLE SAW BLADE-amzn.to/2rEWKgb
DRILL BITS -amzn.to/2sXRfgv
ROUTER BITS-pattern bit--amzn.to/2sXyFF3
SANDER-amzn.to/2sDzb8U
HOT GLUE GUN-amzn.to/2sVYB4t
-------------------------------------------------------------------------------------------------
Please consider supporting my channel with a shirt
I have awesome shirts and more please check it out
patricksworksh...
check me out :
INSTAGRAM : / patrickswrkshop
FACEBOOK: / partricksworkshop
TWITTER: / patrickswrkshop
INSTRUCTABLES:www.instructabl...
LUMBERJOCKS:lumberjocks.com...
THANKS FOR WATCHING PLEASE COMMENT AND LIKE
SHARE AND SUBSCRIBE
CHECK OUT MY OLDER VIDEOS AND LEAVE ME A COMMENT
Copyright © 2017 By Patricksworkshop all rights reserved
Music in this video by :
KEVIN MACLEOD incompetech.co...
incompetech.com

[@NickFerry]

sweet - looks like the compass works out really nice - thanks for the shoutout - now it's hammer time!!

[@Jacka440]

Very nice idea Patrick, I am inspired!

[@Patricksworkshop]

Thanks so much Jack I'm glad you're inspired

[@CanKenMakeIt]

Clever. I was wondering how the compass part would happen.

[@Patricksworkshop]

Thanks again I thought of this idea after watching a few other Homemade compasses

[@tooljunkie555]

i like that Patrick!👍👍pretty cool idea bro. u gonna make a cap for the pin on the bottom so you don't jab Yourself by accident .good stuff though bro glad to see u back at it!🍻🍻

[@Patricksworkshop]

Thanks Joe I appreciate you watching buddy No need for The point I don't plan to jab myself anytime soon. Thanks for watching

[@tooljunkie555]

Patrick's WorkShop always brother and I had to throw it out there I know you know what you're doing but just had to throw it out there you know what I mean looking out for you ")🍻

[@ichhier5165]

The oddest combination ever.
I love it!
Great idea Patrick!

[@Patricksworkshop]

Thanks so much ICH !!!!

[@CanKenMakeIt]

Love the the Lazy Susan planer!

[@LordKaladar]

Can Ken Make It? Ditto

[@Patricksworkshop]

Thanks guys I appreciate you watching there's a link in the description below of the Bering I use for the Lazy Susan Check it out

[@LordKaladar]

Patrick's WorkShop in other news, what would it cost me to get you to make the metal parts of the gauge you used to align your saw? I can get the hardware and dial indicator locally...

[@KingsFineWoodworking]

Dude! That's pretty sweet!

[@Patricksworkshop]

thanks

[@ManCrafting]

Great job Patrick. Looks like you had some fun with the editing. I thought for a second you weren't going to show it in use. Glad you did. Big fan of multi purpose functionality in tools. This certainly fits the bill.

[@Patricksworkshop]

Thanks for watching Chad this was a fun idea Fun build in a really Fun edit

[@SawDustMakerRJM]

Pretty darn clever Patrick!!

[@Patricksworkshop]

Thanks man I appreciate Thanks so much for watching👍

[@oxintheshop]

Very cool project Patrick. I could see how this could come in handy in the shop. Nice added touch with the leather too. Awesome job all around.

[@Patricksworkshop]

Thanks so much for watching Drew This was a Superfund project Any came out just as I planned

[@ConstructIcon]

Cool tool! I also liked how you used your drill press with vise...I'll have to remember that one! Good job!

[@Patricksworkshop]

Thanks For watching

[@villagetackle]

Awesome Sauce!! I'm falling back in love with your videos. !! Been away for a while. --- keep up the great work Friend!

[@Patricksworkshop]

Thanks NICK been a long time brother I appreciate you watching Hope business is good
We will have to catch up sometime

[@portalwoodworks8499]

Good job patrick,you made the best DAMNED IF I KNOW that I've ever seen.

[@Patricksworkshop]

thanks David it came out better than i was hoping thanks for all the support and for watching

[@ClintRoseCarving]

That's very cool, really interesting idea and came out looking very nice, bravo! - Clint

[@Patricksworkshop]

Thanks so much for watching

[@mc4kvb]

I totally loved this video! I’ve been wanting to make a mallet as there seems to be thousands of “how to”make them on here but yours look like it is easiest for me to understand and I believe I can make one. Thank you for the nice video. Best of luck in your future projects.

[@Patricksworkshop]

thanks so much Becky!!! good luck on the mallet build, and thanks for watching

[@BigPete7407]

Absolutely amazing! Patrick this is a remarkable idea and superb execution! bravo, nice work sir!

[@Patricksworkshop]

thanks so much Peter I appreciate the kind words thanks so much for watching

[@MRrwmac]

Innovative build! Very nice work! Perhaps some screw on or snap on ends to the handles to protect the "pins"?
How is your dog doing? You said you were going to include the dog in your videos?

[@Patricksworkshop]

Thanks so much for watching I thought about covering the Pointer But it didn't fitAnd look stupid So what what is what it is And it works awesome And I appreciate you watching PS.Ice is you doing fantastic and Today is her birthday

[@woodworkingvideowatcher1873]

This was an outstanding project video Patrick !!! The idea of merging 2 Totally different tools into one is so great ,and you nailed this one right on the head with such awesome execution, and the presentation and high production value I have noticed lately in your videos makes your channel a pleasure and enjoyment to watch,
thank you and keep up the tremendous work.

[@Patricksworkshop]

Thanks so much I appreciate the kind words I have a lot of cool projects coming upAnd I want to keep my edits Consistent The state to those Thank you so much for watching

[@SuperYtviewer]

I only wonder when the first time someone impales themselves on the point when reading for the mallet. Nice idea, but that pairing just doesn't make sense. Looking forward to the next video,

[@Patricksworkshop]

well it makes sense to me and it works so so good and normally i grab a mallet by the middle of the handle so its not a concern with the pointer sticking out and besides who reaches for a tool not paying attention anyway . in the shop you need to be aware of exactly what you're doing or you will be covered in Band-Aids and Cuts lol Anyway Right on thanks for watching

[@MarkMcCluney]

what a clever idea! perhaps you already considered this but would a retractable point be helpful?

[@Patricksworkshop]

Hey Mark was going to use a lead pencil but it just wasn't strong enough So what are sharpie And besides that Anybody can get sharpie Marker Anywhere Let's said I appreciate you watching thank you so much for Commenting

[@ITSAWOODTHING]

Sweet looking mallet, thanks for the shout out, I'm glad the leather helped.

[@Patricksworkshop]

Thank you for all your help Buddy I really appreciate it

[@ESCAGEDOWOODWORKING]

I wanted to say first..but 2nd is better than nothing...let me check it out.

[@ESCAGEDOWOODWORKING]

Excellent!!!

[@Patricksworkshop]

I thankyou for watching and commenting much appreciated 👍

[@jasonhockett5418]

You should send your design into some of these tool companis like Izzy Swan does. I bet that would be a good seller .

[@NickFerry]

I agree!

[@garoglen]

nice project, cool music, how do you have your drill press vise mounted ? good idea, never seen it b4

[@Patricksworkshop]

Thanks Gary The vice is mounted with four bolts And I Tilted the table 90 Degrees For Drilling the bottom of The Mallet I got the vice at Harbor freight years ago Thanks for watching

[@AlfFisher]

:)

[@orelygarcia]

That's Guinness , Patrick. Thumbs up

[@Patricksworkshop]

Thanks so much OG Timbercraft

[@HeavyboxesDIYMaster]

I'm stealing this idea to make my own! Very nice!

[@Patricksworkshop]

I have plans available if you need them link in the description Thanks so much for watching

[@PHIL_S]

kewl idea - I'm needing a heaver mallet I might just go this route as I love things that have more than one function

[@Patricksworkshop]

Thanks Phil I love how this malletcompass works!!

[@paullayden]

glad to see back at it again Pat. Nice project. Will have to try that one myself

[@Patricksworkshop]

Thanks so much Paul Plans are available If you need them
Thanks so much for watching

[@creedbarnett4948]

Wow, great combo idea! You scare the hell out of me with the handle routing!

[@Patricksworkshop]

Thanks for watching And trust me I'm professional And I like my fingers

[@barryroberts6470]

Very nice Patrick, well done.
Barry (ENG)

[@Patricksworkshop]

Thank you Barry thanks for watching

[@jpwoodwork]

Dude those came out awesome

[@Patricksworkshop]

Thanks Jamie I appreciate you watching

[@DesertBumWoodWorkn]

That's just cool Patrick, thanks for sharing

[@Patricksworkshop]

Thank you so much I appreciate you watching

[@errornosuchuser9196]

Cool idea!

[@PaulMeyette]

That's sweet man. Very cool

[@Patricksworkshop]

Thanks for watching Paul appreciate It

[@robertweigandt9449]

Those are very cool Patrick. I like the new video style.

[@Patricksworkshop]

Thanks so much Robert

[@jaredhildabrant13]

thats a cool idea patrick. keep up the great work.

[@Patricksworkshop]

thanks Jared it was a fun project

[@sethwarner2540]

Wow, the swivel planer will save SO many steps!!

[@Patricksworkshop]

Thanks Seth The link to the Bering using the description check it out

[@JustinDepew]

Super cool!

[@Patricksworkshop]

Thanks Justin I appreciate You watching

[@stevesteves8915]

Very inventive! (and I like your planer on a turntable)

[@Patricksworkshop]

Thanks Steve lots more cool ideas on the way .There is a link to the bearing I use for the Lazy Susan bearing in the description below

[@Lazywatchsmith]

Awesome!

[@Patricksworkshop]

Thanks!!!

[@KSFWG]

It's more than a mallet...and more than a compass... A malcomp ? A Compmal ? lol
I don't know what to call it, but I know it came out awesomely great !

[@thomasarussellsr]

KSFWG a Mallass?

[@Patricksworkshop]

Yeah thought about what the cult for a few days so I just came up with the mallet compass or compass mallet Blending the two words together Takes away the meaning so... Anyway thanks for watching Dave 👍

[@jasonhockett5418]

Wicked cool idea . Thanks for sharing .

[@Patricksworkshop]

Thanks Jason this is a fun project

[@BillyMcCord]

Cool idea and execution !

[@Patricksworkshop]

Thanks Billy this is a fun projectThanks for watching

[@mihumus]

Awesome idea, love it!!

[@Patricksworkshop]

Thanks so much I appreciate you watching

[@donnymcarter]

Pretty cool Patrick!

[@Patricksworkshop]

Thanks Donnie I appreciate you watching brother

[@bill-chichi9701]

Welcome back. Great come back video.

[@Patricksworkshop]

Thanks so much Bill Glad to be back to woodworking Lots more come stay tuned

[@EvanDunville]

Cool idea! Your bench vise is a beast too!

[@Patricksworkshop]

Thanks Evan That vice actually used to be my father's And I'm proud To use it in my shop Thanks so much for watching

[@LordKaladar]

pretty dang slick!

[@Patricksworkshop]

Thanks Walter thanks for watching

[@FeralBoyKnives]

Pure genius!

[@Patricksworkshop]

Thanks so much appreciated watching

[@fritzkraemer1185]

nice!fun Projekt in a good Video

[@Patricksworkshop]

Thanks so much for watching Fritz

[@KellyBrownwrsd]

Great video, like the format

[@Patricksworkshop]

Thanks Kelly Really appreciate you watching

[@thomasarussellsr]

Brilliant

[@Patricksworkshop]

Thanks so much Thomas

[@frankorona1]

Genial idea, gracias por compartirla.

[@Patricksworkshop]

Muchas gracias por mirar Glad te gustó

[@censeless24]

great idea wish I had thought of it

[@Patricksworkshop]

Right on Donald thanks for watching

[@mfwoodshop]

Great Idea patrick

[@Patricksworkshop]

Thanks so much for watching Mike Appreciate big-time 👍

[@NickFerry]

I know Mike!

[@cybercapri]

Excellent project

[@Patricksworkshop]

Thanks Paul

[@weissbornjr]

Pretty cool idea

[@Patricksworkshop]

Thanks so much Bill

[@robertledoux8318]

Tres bonne idée c'est parfait merci

[@Patricksworkshop]

Merci beaucoup de regarder, j'apprécie vraiment le commentaire

[@JLo7575]

Ingenious !

[@Patricksworkshop]

Yes yes it is Ha ha thanks for watching

[@robertkutz]

nice work.

[@Patricksworkshop]

Thanks so much Robert

[@JedidiahShultzIrishCraftsman]

Very cool brother!!!😊😊👊👊

[@Patricksworkshop]

Glad you liked it brother thank you

[@JedidiahShultzIrishCraftsman]

Patrick's WorkShop you're very welcome!!😊

[@Thom4123]

Had to come back after seeing this on Russ's show last night and what a cool design

[@Patricksworkshop]

Thanks so much Thom I Appreciate you watching