Sorry for the no sound (the tech. I had at the time of recording was lacking. If you have any questions, please use the BikeGremlin forum - I try to respond to every comment, but UA-cam sucks at notifications, especially when it comes to any follow-up questions. www.bikegremlin.net/ Relja
Thanks for the video! Would be even better with some explanation and close-ups but I guess I can't complain because this is about the only video on YT showing you how to do this
Very cool 😎 video ….. I had already done this but it took a while putting it back together before I realized I had to gently pry the primary cover back . You explain that clearly here and it’s a good silent movie 🍿 😂
The last three pieces you remove, are the brake tapes? Are they replaced? I have the same system but it doesn't slow down too much. There are parts that need to be replaced like conventional brakes. I don't understand how it works. Thank you
применил голландское масло фирмы Kroon Oil=Complex PTFE White Grease EP2-600 грамм,отлично работает,первый день,было туговато и медленно срабатывал переключатель,а дальше как новенький,это при том что до этого пробовал другие масла,добавлял во внутрь масло моторное,все равно скрежетало ужасно,как будто ломается,а потом начинало само тормозить.После пременения белого масла голландского,все направилось.Проблема была-заднее колесо было в воде,немного заржавело и масло залипло и не работало переключение передач,разобрал все и промыл бензином,далее при сборке применил голландское масло,консистенции густой сметаны.
@@BikeGremlinUS Thank you for replying to my message. I will do this on the weekend.I wonder if it is necessary to put new parts in the roles.By the way, my bike is Batavus 8-speed
Ako bicikl nema prihvate za montiranje čeljusti disk kočnica, pogotovo napred, ja ih ne bih stavljao jer ne znam je li viljuška dovoljno jaka. Opširnije o tome: bicikl.bikegremlin.com/12194/dizajn-rama-bicikla/#3.1
Pozdrav, Jako interesantan klip koji me je naveo na jedno pitanje. Imam bicikl sa Shimano Nexave BR-IM70-R kocionim sistemom i stvar je u tome sto one koce skroz dobro ali su prebucne kada se koci pri vecoj brzini (da ne pricam nizbrdo). Da li ta buka, skrpa, moze da se otkloni ciscenjem i podmazivanjem? Kao sto napomenuh, koce i dalje dobro ali s obzirom da sam kupio polovan bicikl, ko zna koji sam vlasnik po redu a cisto sumnjam da je iko ikada cistio i podmazivao ove kocnice... da li imate neki savet? Hvala Vam unapred 😊
@@BikeGremlinUS Hvala puno na odgovoru kao i na korisnom linku! Pisacu kad budem uradio kako je proslo kako bi ovo mozda bilo korisno nekom sa istim/slicnim problemom.
There should be a washer between your frame and the aluminium disc. This washer had a rubber ring inside that loosens after several years. If you replace it it wont rattle anymore. Doesn't influence the braking tough.
@@BikeGremlinUS koliko sam video nema samo pakne, samo komplet kočnice. Hvala u svakom slučaju pratio sam tvoja uputstva i super sklopio,očistio i vratio sve kako je bilo :)
@@BikeGremlinUS Do you have any advice on what grease to use. I have heard marine grease or any grease that is good for high temperature but not sure what to buy. Shimano make some I know but it is quite expensive and I will need a bit as I have a few bikes to service there must be something equivalent or better from a parts shop.
Still, I am very grateful for this video. When I tried to clean my Shimano roller brakes, the assembly fell apart and I didn't know how to reassemble it again. The first spring, I could identify as where to put it, but about the big round one, I had no clue. Many thanks for this help, it is much appreciated!
Sorry for the no sound (the tech. I had at the time of recording was lacking.
If you have any questions, please use the BikeGremlin forum - I try to respond to every comment, but UA-cam sucks at notifications, especially when it comes to any follow-up questions.
www.bikegremlin.net/
Relja
Thanks for the video! Would be even better with some explanation and close-ups but I guess I can't complain because this is about the only video on YT showing you how to do this
Thanks to this video I was able to put mine back together after I took it apart without making pictures, thank you for the video!
Nice little video, a great help, thank you.
Very cool 😎 video ….. I had already done this but it took a while putting it back together before I realized I had to gently pry the primary cover back . You explain that clearly here and it’s a good silent movie 🍿 😂
A meditative video :)
@@BikeGremlinUS 😂🙏
The last three pieces you remove, are the brake tapes? Are they replaced? I have the same system but it doesn't slow down too much. There are parts that need to be replaced like conventional brakes. I don't understand how it works. Thank you
Hello sir. There is noise coming from the disc of the front wheel rollerbrake. How can I fix this problem?
Hi,
Please use the BikeGremlin forum for technical questions:
www.bikegremlin.net/
Relja
Thank’s for the video, what kind of grease do you recommend for the breaks.
Don't mess around. it is a molybdenum disulphide based greas. So the original Shimano Rollerbrake Grease. Nothing else!
Good and cheap substitute Febi bilstein 02582 grease!!
@@piksinjo69 sehr korrekte Antwort👍
would have been an awesome video if the person was describing what is each part...
применил голландское масло фирмы Kroon Oil=Complex PTFE White Grease EP2-600 грамм,отлично работает,первый день,было туговато и медленно срабатывал переключатель,а дальше как новенький,это при том что до этого пробовал другие масла,добавлял во внутрь масло моторное,все равно скрежетало ужасно,как будто ломается,а потом начинало само тормозить.После пременения белого масла голландского,все направилось.Проблема была-заднее колесо было в воде,немного заржавело и масло залипло и не работало переключение передач,разобрал все и промыл бензином,далее при сборке применил голландское масло,консистенции густой сметаны.
thanks for this video mate. i used the wrong kind of grease do you think its smart to open it up and clean it ?
Thanks for responing
Hello, I have rear drum brakes, but when you press the brakes, the brakes are weak. Thank you BR-IM31 Nexus
@@BikeGremlinUS thank you very much👍👍
Hello sir i have a br-im41R that has weak braking power mostly it would stop my bike real fast thst it would even lock the wheel pls help
Hi,
If you need any help or advice, please post the question on the BikeGremlin forum:
www.bikegremlin.net/
Relja
My bike's rear brake is like this, but I get a noise, what should I do now?
@@BikeGremlinUS Thank you for replying to my message. I will do this on the weekend.I wonder if it is necessary to put new parts in the roles.By the way, my bike is Batavus 8-speed
Pozdrav. Da li je moguce montirati normalne disk kocnice na bicikl sa roller kocnicama? Hvala unaprijed na odgovoru.
Ako bicikl nema prihvate za montiranje čeljusti disk kočnica, pogotovo napred, ja ih ne bih stavljao jer ne znam je li viljuška dovoljno jaka. Opširnije o tome:
bicikl.bikegremlin.com/12194/dizajn-rama-bicikla/#3.1
you saved me...thanks
Pozdrav,
Jako interesantan klip koji me je naveo na jedno pitanje. Imam bicikl sa Shimano Nexave BR-IM70-R kocionim sistemom i stvar je u tome sto one koce skroz dobro ali su prebucne kada se koci pri vecoj brzini (da ne pricam nizbrdo). Da li ta buka, skrpa, moze da se otkloni ciscenjem i podmazivanjem? Kao sto napomenuh, koce i dalje dobro ali s obzirom da sam kupio polovan bicikl, ko zna koji sam vlasnik po redu a cisto sumnjam da je iko ikada cistio i podmazivao ove kocnice... da li imate neki savet?
Hvala Vam unapred 😊
@@BikeGremlinUS
Hvala puno na odgovoru kao i na korisnom linku! Pisacu kad budem uradio kako je proslo kako bi ovo mozda bilo korisno nekom sa istim/slicnim problemom.
My disc is loose on my brake, the disc is it normal and how do i fix it?
There should be a washer between your frame and the aluminium disc. This washer had a rubber ring inside that loosens after several years. If you replace it it wont rattle anymore. Doesn't influence the braking tough.
@@alwinkruijt8260 where can I get a new rubber ring?
This guy is not only a mute in his video... thanks for all your responding
da li ima neki delovi koji se menjaju na tom modelu?
ja imam isti i poceo je znatno slabije da koci
@@BikeGremlinUS problem je što u srbiji ne mogu da nadjem takve pakne već moram od preko da naručuje m :(
Hvala na dobrom klipu i odgovoru
@@BikeGremlinUS koliko sam video nema samo pakne, samo komplet kočnice. Hvala u svakom slučaju pratio sam tvoja uputstva i super sklopio,očistio i vratio sve kako je bilo :)
No grease before re-assembly?
@@BikeGremlinUS Do you have any advice on what grease to use.
I have heard marine grease or any grease that is good for high temperature but not sure what to buy. Shimano make some I know but it is quite expensive and I will need a bit as I have a few bikes to service there must be something equivalent or better from a parts shop.
@@thedave7760 Don't mess around. it is a molybdenum disulphide based grease. So the original Shimano Rollerbrake Grease only. Please nothing else!
@@alwinkruijt8260 Good and cheap substitute Febi bilstein 02582 grease!!
Thanks 👍👍👍👏
Not close enough
No speak
Camera too far, not focus on subject but on man
video good idea anyway
Still, I am very grateful for this video. When I tried to clean my Shimano roller brakes, the assembly fell apart and I didn't know how to reassemble it again. The first spring, I could identify as where to put it, but about the big round one, I had no clue.
Many thanks for this help, it is much appreciated!
Oh great more bad music
Hahah - apologies for the "sound."
Relja