FIXED!!!HTVRONT NOT working out of box!!! Auto press not working manual press beeping
Вставка
- Опубліковано 7 вер 2024
- Read many posts about this being a common issue with the htvront not working correctly out of the box. Hope this helps someone#htvront
- Авто та транспорт
Thank you for posting this! I just bought and unpacked my machine and was devastated that it didn't work. I followed your instructions and it worked! Thank you for sharing!!
This was helpful information! My auto heat press works again! Thank you!
Great to hear!
Omg this is so helpful cause mine won’t close
I bought one and it seems to work but the power button doesn’t turn off. It flashes all the time unless I unplug it. Do you know what could be wrong? Do they have a reset button?
Mine seems to do the same thing. It appears to be a way of reminding us it’s still plugged in. Not sure why they would want to to flash when it’s turned off though.
Yes , mine is also blinking. I just unplugged it after it has completely cooled down.
My heat press works for a couple of hours and then it quits by giving me the flashing and the beeping. It seems if I give it a day's rest or so, it works again. Is that still a problem with the switch?
My auto press won’t start up. Plugged in switch doesn't work. Wall outlet is fine. Is there a reset button?
This machine is very simple, check the wiring by taking off the back. If it’s not getting power at all you’ll need to use a multi meter to find where the voltage stops
The fan on mine isn’t coming on, so not sure how to fix that
Test the voltage of the fan leads with a multimeter when it should be on. If no voltage present may be a bad board. If there is the fan is probably dead
@@danielwlyles My fan stopped working as well, but the press works perfectly. I guess if your not running it for an extremely long time, it will be ok. At least that is what I hope.
Tried this, but my switch wasn't out. There was a knocking sound at the top.
thats what im getting now
Did you fix it?
Did you fix the knocking sound?
@@Kytozky i contacted HTVront regarding the knocking sound and was sent a replacement, i was just under the 1 year warranty
Hello, I opened mine up and the cables are connected. Any suggestions on what else can be going on?
Thank you :)
These things seem to have a been made by a company with a large aggressive reduction in quality control.
Id say if it’s blinking it’s getting power but if everything is connected and the connection ends are mounted solid you would have to start tracing wire or multimeter pin out