We did an absolutely fantastic job, re-repairing a broken axle housing on an incredible truck
Вставка
- Опубліковано 11 кві 2024
- We did an absolutely fantastic job, re-repairing a broken axle housing on an incredible truck
#did #absolutely #fantastic #job #repairing #broken #axle #housing #incredible #truck - Авто та транспорт
Keeping death on the road since 1947.
Сколько смотрю и столько же восхищаюсь. Молодцы Индийцы.👍🇷🇺
гнутый электрод был, значит ремонт качественный. Счастливого пути водиле
Снять мост с гружёного грузовика прямо на улице у них как отдельный вид искусства!
I guess welding rods are cheaper than a new rear axel, sure hope it lasts.😂
More welds to break when they overload the truck again
Cool work thanks 👍
даже шов не разделали< металл толстенный < насрали с верху а потом сточили) до первого перегруза!))))))
они занимаются х..й, дрочиво какое то, при установке на машину мост лопнет по шву даже без нагрузки от напряжений в самом металле при движении полуосей. его порвет как тузик грелку ))))
Very good ❤
Looking at the housing when it was on the press. The crack looked like it was cut with a cutting torch.
It was as shown in other UA-cam video's
It is Amazing the Repairs Ive Seen These Men do
Меня больше всего интересует вопрос , каким образом можно сломать мост в этом месте?
предполагаю что использовали мост как пустую ось (без редуктора) и перегрузили знатно. хотя бы на резьбы закрутили самодельную пластину по типу крышки (блин) усилили бы... а так ломанули пустой чулок
Качество метала вот и все загадка
На мой взгляд он не лопнувший, а газорезкой резан. Да и по виду где то на металлоломе сперли.
Видно же газорезом прорезанно специально для контента 😅
Awesome 👍👍 incredible job😍😍
its a wonder they did not grind out a v shape to get a full penitration weld, I would be worried about a weak weld splitting.
I like the way the trucks are painted rainbow colors and that the employees are allowed to wear dresses.🌈
The repair work has been carefully engineered and executed. The welding work is satisfactory. Will last the lifetime of the axle
Repairing a cast with a weld doesn't sound loud like a good idea
I think these guys sing backup on the Alvin and the chipmunks album😁
Самый цимус в этом всём нелёгком деле это треугольник как усиление, чтоб не разорвало.😁👍
Из металла, который в два раза тоньше исходного
오늘도 한가한 파키스탄 장인분들
welding electrodes LB-52U GOOD WORK
Allemaal slakinsluiting, kutelektroden gebruikt!
С низу верх правельней варить! И крепче будет
It looks cut open rather than broken.
That is because it was first cut open and also this same video has been shown numerous times by other UA-cam channels.
Just think. for this "alleged" break to happen the bolts holding the differential must have been made from elastic and also think of how much gear oil was "leaked" through the break in the diff housing.
My thoughts also, see at 3.59
@@stanstevens3783 Yes this is definitely a FAKE failure.
Yea looks like those guys just hang around to make fake videos. Probably just a bunch of paid actors.
Top 🇧🇷
there is no way that anything inside of this axle will run true to each other.
this axle will chew up bearings and bevel gears by the hour, if it spins at all.
Прикалывают восторженные комментарии с запада.
как так грузить что орех пополам!!!!
When an axle is damaged like this one, and repaired with dirty welding, it is doomed to fail again. Yes, they have nothing to work with and it's amazing under the circumstances but when the same truck is overloaded again who will be hurt or killed when it fails all over again? This is not a matter of if, but when it will happen.
The condition of the roads in that part of the world prevents driving at any speed. Safety isn't a concern. I imagine getting the truck back on the road and earning money while a new axle is sourced from China, or where ever, is the chief concern. This is a farm repair. Get the tractor patched up and we will fix it properly after harvest is in.
Такие поломки случаются у индусов , пакистанцев и бангладежцев,потому что они наслаждаются от перегруза техники. Они будут больные, если не перегрузят.
Good job❤❤
❤💪👍
The cost of a new axle has been saved; new material has been saved. A job well done
Для чего треугольный вырез сделали, а потом косынку вварили?
Это типа замка. Чтобы не лопнуло снова по прямому шву.
А если поверх шва латку?
@@aysanovaliy не. Надо именно чтобы шов по по зигзагу шел. Сверху заплатку сорвет.
Самое смешное, что после треугольника на видео видна трещина. Они не заварили гдето 3-5см. Масло оттуда будет срать литрами! XD
Nope!
какой то бред,паролельная вселенная!!!
Today's peaceful Pakistan...
Cavemen using tools!