you talk about everything but the best upgrade, the centerbrace. Did you bolt it right in the existing places or did you have to make stuff to bolt in? The firewall was made of an old protein-tube? Brilliant as the car itself is....
FTX texan headlight kit, some bulbs an a splitter cable. drill two holes through the front bar of the body frame an mount the lights. less than a tenner an a 5 min job. An looks awesome. Youre welcome
great advice , i have done most of these mods you suggested . Maybe also put some rubber under the motor as i heard it slams into the chassis and can bend the motor mount or magnets come loose inside the motor . I have done your chassis mod, i put black plastic in the underside of the shell to act as a mudgurd , i have a metal rear /rear suspension arm mount on the way too . Just need some good weather !
You mean 50000 not 5000 for the dif oil. I paused the the vid and looked at the lid. Also did you try it in the other difs? I like the tray mod you did to keep it clean and is there one you can buy or do you have to make one? Cheers
Hey bud cool vid man great details. I have the team associated db8 and it looks very similar. I am hoping my bud gets one of these. I was going to ask how it holds up and you said it is a bit of a tank haha love it man. New supporter here my UK 🇬🇧 brother 🙌🏼🙌🏼👊🏼
Hi mate just watched your video brilliant mate. And by the way what did you use on the body clips was it string and last of all on the front to stop mud going in to the truck what rubber was it and where too buy thanks 😊
Hi, I used some orange string I found somewhere and some heat shrink to cover the knots and give I nice finish. The mud guard was cut out of a tub from some powder for the gym but you could use Tupperware I suppose.
@UK Small torque hi mate just a update I finished my ftx dr8 the body clips are done so has the servo arm left up a bit with a washer. But not sure about this front mudflaps what do you think I could use and it's cheap enough 🤔 let me know thanks 👍☺️
I would recommend 300K for the center diff. I used 500K before but it was difficult to drive in a straight line until it thinned up over time. 300K will stop the blooming of the front tyres and give more power to the rear.
On the DR8 I would not go higher than a 15t on the standard wheels to be honest. It is so fast and just uncontrollable but you get awesome air control. I am back down to 11 now after increasing the wheel size
@@none-qq9lg 2 up from stock is 14t and this gives a noticeable speed increase and probably makes 4s seem like 6s while not pushing your electronics too hard
you talk about everything but the best upgrade, the centerbrace. Did you bolt it right in the existing places or did you have to make stuff to bolt in? The firewall was made of an old protein-tube? Brilliant as the car itself is....
FTX texan headlight kit, some bulbs an a splitter cable. drill two holes through the front bar of the body frame an mount the lights. less than a tenner an a 5 min job. An looks awesome. Youre welcome
great advice , i have done most of these mods you suggested . Maybe also put some rubber under the motor as i heard it slams into the chassis and can bend the motor mount or magnets come loose inside the motor . I have done your chassis mod, i put black plastic in the underside of the shell to act as a mudgurd , i have a metal rear /rear suspension arm mount on the way too . Just need some good weather !
Hi Mate, the best thing I have done to mine is move the foam block in the battery tray, to the back next to the ESC.
I took it out and chucked it..
good info here matey just got one today . subbed
I got a set of proline badlands on my db8 and it is a different beast 🔥🔥🔥
Hey man thank for subscribing and glad you liked the vid, check out my other videos if you havent already for some bashing. The DR8 is indeed a tank
@@uksmalltorque5563 cool bud no worries. Had a watch of those as well man looks really good 🔥🔥🔥
You mean 50000 not 5000 for the dif oil. I paused the the vid and looked at the lid. Also did you try it in the other difs? I like the tray mod you did to keep it clean and is there one you can buy or do you have to make one? Cheers
Seen these do 60mph out of the box, need warmer weather.
Useful video. Thanks.
Hey bud cool vid man great details. I have the team associated db8 and it looks very similar. I am hoping my bud gets one of these. I was going to ask how it holds up and you said it is a bit of a tank haha love it man. New supporter here my UK 🇬🇧 brother 🙌🏼🙌🏼👊🏼
I love this all cute racing car
Hi mate just watched your video brilliant mate. And by the way what did you use on the body clips was it string and last of all on the front to stop mud going in to the truck what rubber was it and where too buy thanks 😊
Hi,
I used some orange string I found somewhere and some heat shrink to cover the knots and give I nice finish. The mud guard was cut out of a tub from some powder for the gym but you could use Tupperware I suppose.
@UK Small torque hi mate just a update I finished my ftx dr8 the body clips are done so has the servo arm left up a bit with a washer. But not sure about this front mudflaps what do you think I could use and it's cheap enough 🤔 let me know thanks 👍☺️
@@Moggmodels23 you could cut up a large plastic bottle.
@UK Small torque which bottle milk or clear orange one
@@Moggmodels23 either would work, your choice really
do you need to run it with the spare tyre on back?? looks a bit off to me
What weight centre diff oil would you recommend? Will be primarily used on grass in a large open area, thanks
I would recommend 300K for the center diff. I used 500K before but it was difficult to drive in a straight line until it thinned up over time. 300K will stop the blooming of the front tyres and give more power to the rear.
How did you get on with the 16T pinion? Would you go higher?
On the DR8 I would not go higher than a 15t on the standard wheels to be honest. It is so fast and just uncontrollable but you get awesome air control. I am back down to 11 now after increasing the wheel size
@@uksmalltorque5563 what size would you recommend I go for?, primarily will be used on grass in a large open area with stock tyres
@@none-qq9lg 2 up from stock is 14t and this gives a noticeable speed increase and probably makes 4s seem like 6s while not pushing your electronics too hard
@@uksmalltorque5563 I've only got 6s batteries, may go with 16T from what I've read some people have gone 18T!
Can you get different bodies for this
No idea to be honest but I did see another UA-camr with what looked like some sort of stadium truck body on his.
What pitch is the pinion
Mod 1 mate (M1)
Do U no ware I can get the 6s battery from mate
I get mine from Amazon, zeee are great batteries. I have a 5200mah 6s and it lasts well.
Make new vids