I Love how easy this ua-cam.com/users/postUgkxvAj3godqGAIP5rApM1laH767JGtPG1-h carrier is to adjust from my friend to me taking turns holding the baby! It provides great support on my back too! This has definitely made shopping easier! I always get asked where I get it too!
Just calling out here that if you start to torque the ubolts you will bend those tabs (AEV instructions call for 43 pounds). Does anyone here know if those tabs are supposed to bend around the frame? They will bend long before 43 pound feet. Talked to another individual on the forums that did this install, and he noticed the same thing. Both of us stopped torqueing when they started to slightly bend.
What size hole you made and what is that tool you are using at 23:49 for the bump stop? I just ordered my bumper and tire carrier and looks like you are adding that bump stop step-as I haven't seen it done by anyone else. I think it is a good addition. If you can give me more info on it that would be awesome!! Thanks for this great video.
Hello, I am interested in this product, But i have a question for you. you mean It can't fit 40 inches tire with fuel cannister, other choice is it can fit up to 40 inches tire without fuel cannister. AM I RIGHT?
Very interesting: the water tanks are missing. On my JK AEV bumper i have two tanks. But AEV do not provide the water pump and hoses, that are specifically needed, not any more.
As usual another great video! I wish you would do an install video for the AEV rear bumper for the JK. There are no professional videos out there for the rear bumper like there is for the front on the AEV site. Question. Why did AEV abandon the water tanks for the JL bumper or are they available at extra cost? Thanks.
Thanks for the props! If we can get an AEV JK rear in here to do a video on it, we will. They only built the tanks for the JK, not for the JL bumper. We would guess that if enough people asked for JL water tanks, they'd build some.
We have this same set up on our 392 and love it. Fueling from the aux tank directly into the jeeps gas tank is very easy. My question is, would you know any spare tire mounted bike rack that would work with this set up ? All the ones I’ve seen have tubes that hang on the spare but the fuel tank seems to block it. Thank you
@@guarnibl Hey Bret, sorry for the delay in response. No, we did not have to adjust the exhaust. I am concerned with it that it sits so low one day it will get smashed on something but till then, 🤷♂️.
Why is the tire carrier installed and then removed? Seems unnecessary unless I am missing something. Just install the tank first then install the carrier and adjust.
It is all about the trim tanks. You have to install the carrier to adjust and tighten the spindle housing. And you have to do that before you install the plastic trim tanks. Once that is done, you have to put the carrier arm out to install the trim tanks.
Sweet I like it 👍👍👍 but if I believe you said or the video said giveaway??? If I’m not wrong that was for 2021 I’m seeing just couple hrs ago on this was put on 🤔 I love the whole build love it 👍👍👍👍
All installed and it looks great. Now for 37s
I Love how easy this ua-cam.com/users/postUgkxvAj3godqGAIP5rApM1laH767JGtPG1-h carrier is to adjust from my friend to me taking turns holding the baby! It provides great support on my back too! This has definitely made shopping easier! I always get asked where I get it too!
😂🤣😂
I've never been crazy about tube bumpers, but I could definitely live with this one. The optional fuel tank should be a major selling point.
The spare gasoline can is an outstanding idea, along with the tire carrier and rear bumper! Nice job on showing the installation of everything!
Glad it was helpful....We really like this set-up!
AEV just makes quality $hit, love the build so far!
Just calling out here that if you start to torque the ubolts you will bend those tabs (AEV instructions call for 43 pounds). Does anyone here know if those tabs are supposed to bend around the frame? They will bend long before 43 pound feet. Talked to another individual on the forums that did this install, and he noticed the same thing. Both of us stopped torqueing when they started to slightly bend.
I love the look of it
Thanks for the video purchased from NR4X4
i wish you guys can do a flare extension install video, that will help alot .
We'll see if we can do that one later this spring.
What size hole you made and what is that tool you are using at 23:49 for the bump stop? I just ordered my bumper and tire carrier and looks like you are adding that bump stop step-as I haven't seen it done by anyone else. I think it is a good addition. If you can give me more info on it that would be awesome!! Thanks for this great video.
We match the same size hole on the JK tailgate that the bumps came from.
iirc it was 3/8".
Hello, I am interested in this product, But i have a question for you. you mean It can't fit 40 inches tire with fuel cannister, other choice is it can fit up to 40 inches tire without fuel cannister. AM I RIGHT?
Yes.
Very interesting: the water tanks are missing. On my JK AEV bumper i have two tanks. But AEV do not provide the water pump and hoses, that are specifically needed, not any more.
AEV hasn't released water tanks for the JL yet.
As usual another great video! I wish you would do an install video for the AEV rear bumper for the JK. There are no professional videos out there for the rear bumper like there is for the front on the AEV site. Question. Why did AEV abandon the water tanks for the JL bumper or are they available at extra cost? Thanks.
Thanks for the props!
If we can get an AEV JK rear in here to do a video on it, we will.
They only built the tanks for the JK, not for the JL bumper. We would guess that if enough people asked for JL water tanks, they'd build some.
Find you someone that loves you the way Tim loves his loctite stick.
Great post!!!!
Thanks!
Mine has a wire sticking out of the wheel spoke. Did yours end up with that?
We have this same set up on our 392 and love it. Fueling from the aux tank directly into the jeeps gas tank is very easy. My question is, would you know any spare tire mounted bike rack that would work with this set up ? All the ones I’ve seen have tubes that hang on the spare but the fuel tank seems to block it. Thank you
A hitch mount bike carrier might be the best solution.
@@aevnate4140 thank you for your response, i am hopping to avoid that so that i can freely use the swing out door.
Did you have to lower the exhaust on one side to get the corners on? My 392 exhaust was sitting higher on one side than the other -- just curious.
@@guarnibl Hey Bret, sorry for the delay in response. No, we did not have to adjust the exhaust. I am concerned with it that it sits so low one day it will get smashed on something but till then, 🤷♂️.
I love it!! Are we still running on stock axles?
Yes we are... Gears and Lockers coming soon!
Love the set up, though how about the departure angle, same as factory or less?
Definitely better than the factory DA.
Why is the tire carrier installed and then removed? Seems unnecessary unless I am missing something. Just install the tank first then install the carrier and adjust.
It is all about the trim tanks.
You have to install the carrier to adjust and tighten the spindle housing. And you have to do that before you install the plastic trim tanks.
Once that is done, you have to put the carrier arm out to install the trim tanks.
Sweet I like it 👍👍👍 but if I believe you said or the video said giveaway??? If I’m not wrong that was for 2021 I’m seeing just couple hrs ago on this was put on 🤔 I love the whole build love it 👍👍👍👍
There will be a few more build videos for the 2021 Giveaway Jeeps coming.
You would love to hear from us. Well I would love to hear from you as a winner of one of these amazing rigs, just sayin !!!!
Just waiting for all the legalities to be finished from the sweepstakes, then we get to contact the winners, whoever they may be.
Welldon
B U T FUL👌👌👌👌☝️☝️☝️☝️
Thanks
wish you did installs!
We do! Call 866-601-5340 or email sales@northridge4x4.com
Love it 👍👍👍👍👍👍👍
Do you guys solely work on Jeeps?
We work on any 4x4 that comes through the door.
Has a winner been picked yet?
Very soon, the sweepstakes company is going through all the entries and making sure everything is perfect on the legalities side.
Beautiful bumper, but for $2300 I'll pass
Way too complicated install
There is a lot to the AEV rear bumper, but it is well worth it.
What kind of grease did you use?
We used a basic wheel bearing grease from the local auto parts store.
Does the tire carrier move independently of the tail gate?
No, it swings out with the tailgate.