Lol I did this same build a couple years ago but with a weed eater motor and mounted it behind the wheel, at the time I was young and didn’t have much knowledge and what ended up happening was that the mounting method that I used was to weak and I also used the same clutch that the weed eater used which resulted in the chain getting thrown off after going faster than 10km an hour but that wasn’t it, the weed eater was at least 7 years old and ran like crap, pull starter barely worked and took at least 50 pulls to start. Eventually I decided to pull apart the engine to see how it worked and then when I tried to put back in the piston rings I broke one. That’s when I decided to throw out the engine.What’s funny is that now 4 years later I wanted to give it another go so I just bought a proper engine and it happened to be the exact same one as yours 😂 hasn’t come yet but this time I’m going to build a scooter frame and do it properly. Wish me luck.
Awesome man...i just picked up the exact same color and scooter with a new 49cc motor already mounted n hooked up with throttle...needs gas tank installed n brake hooked up but it might not work reading your comments since its flipped around now...havnt messed with it...i want to mount a 212 on it...do you know if the stock razor sprocket will work with a 35 chain? Instead of the t8 or whatever they call it.....
+Mark Kraska I thought about that but my chain brake isn’t effective on #25 chain it is made for #40 and it will just crush the #25 link and leave a crushed bit of metal where I attempted to break it instead of breaking the pin out, so I decided to just cut the bar. But the motor mount i put in definitely makes up for cutting the bar out, the bed frame I used for the motor mount is extremely sturdy.
I love the build but I really think you should have bought a smaller chain break broke the chain moved the engine closer giving you allot more foot room and it would have allowed you to scoot the rear axle all the way up so it wouldn’t get tourqed out of place
I am going to do this with my razor e90 it’s like 3 years old but I was wondering will the wheels be strong enough as they are just scooter wheels not big tires like yours
You really want 35h chain . 25 gets pulled out too fast with too much power. My 50cc is snapped head bolts, so I had to use bigger head bolts! It's making too much for 25 chain
hi you need to get a couple of teeth bigger on the top sprocket if your able to you will have a little faster top speed try it you will see great music too
Haha ..a little bit late, but I build exactly THIS scooter..because of your YT guide !!! I used a grasscutter..a Robin NB411........this motor is exactly a 49cc minibike engine..so parts are easy to buy. See ua-cam.com/video/NR6wLx0wy-s/v-deo.html Thank you for your vid!!
I could give you some tips for sure, you were too cold in this video for sure. Also, tacking ain’t welding remember that! Try some pattern when you are running beads instead of just pushing or dragging straight. That’s about all I can give ya without knowing your gas mixture or wire size. Keep burning man!
Nice, I built one with a chainsaw motor. 50mph , but the brakes needed upgraded 👍👌
That is awesome!
Wheres the second part?
Lol I did this same build a couple years ago but with a weed eater motor and mounted it behind the wheel, at the time I was young and didn’t have much knowledge and what ended up happening was that the mounting method that I used was to weak and I also used the same clutch that the weed eater used which resulted in the chain getting thrown off after going faster than 10km an hour but that wasn’t it, the weed eater was at least 7 years old and ran like crap, pull starter barely worked and took at least 50 pulls to start. Eventually I decided to pull apart the engine to see how it worked and then when I tried to put back in the piston rings I broke one. That’s when I decided to throw out the engine.What’s funny is that now 4 years later I wanted to give it another go so I just bought a proper engine and it happened to be the exact same one as yours 😂 hasn’t come yet but this time I’m going to build a scooter frame and do it properly. Wish me luck.
How did you hook up the kill switch??
Cool video, that's gonna be a sweet ride. Now I feel bad about chopping mine up for the Big Wheel build!
What about the threads on the freewheel?
Awesome man...i just picked up the exact same color and scooter with a new 49cc motor already mounted n hooked up with throttle...needs gas tank installed n brake hooked up but it might not work reading your comments since its flipped around now...havnt messed with it...i want to mount a 212 on it...do you know if the stock razor sprocket will work with a 35 chain? Instead of the t8 or whatever they call it.....
what size chain did you use
Your good at this... Thanks for the video
What chain and sprocket did you use on this configuration?
that looks like a t8f sprocket on the engine.. do i need a t8f sprocket and chain?
What kind of welder you use.
Also with that gear ratio it does exactly 50kph
I know this is an old video but, if you somehow happen to see this would you mind sending me the link to the engine you used? Thanks!
Amazon has the same motors for super cheap. Just look up 49cc pocket bike motor. I just bought one for $60
What rims and tires are those
You could of used a chain break with a master link and make the chain go around the metal instead of cutting it.
+Mark Kraska I thought about that but my chain brake isn’t effective on #25 chain it is made for #40 and it will just crush the #25 link and leave a crushed bit of metal where I attempted to break it instead of breaking the pin out, so I decided to just cut the bar. But the motor mount i put in definitely makes up for cutting the bar out, the bed frame I used for the motor mount is extremely sturdy.
Part 2 please bro and test top speed
Love the vids again
I love the build but I really think you should have bought a smaller chain break broke the chain moved the engine closer giving you allot more foot room and it would have allowed you to scoot the rear axle all the way up so it wouldn’t get tourqed out of place
Where's second part?
I am going to do this with my razor e90 it’s like 3 years old but I was wondering will the wheels be strong enough as they are just scooter wheels not big tires like yours
Hmm just put bigger rubber wheels
What kind of chain is that also is that chain the original from the razor because I have the same razor I might be doing the swap on to
I have the same too n wondering the same...i want to know if i can use a 35 chain and sprocket from a predator motor n mount that instead of the 49cc
You really want 35h chain . 25 gets pulled out too fast with too much power. My 50cc is snapped head bolts, so I had to use bigger head bolts! It's making too much for 25 chain
Nice intro!!
Thank you!
So what razor scooter did you use?
It was a razor e200
Looks like an E300
Why did he buy the i hook washer thing if he could just weld the bolt in place
what type of engine you used?
Just search 49cc engine and amazon will have that model.
@@Jesterwonder01 thanks
@JeromeRuck you are welcome.
nice, that thing is gonna rip!
Where’s the engine from
that's a mini bike engine aka pocket rocket.
Where did u get the engine? And Great vid!
CS MOTO vlogs it’s a cheap Chinese 50cc you can get em on amazon and wish for 70 bucks
Nice !!
Cool 👍
Looks pretty good. Shes going to rip
Part 2 Please
hi you need to get a couple of teeth bigger on the top sprocket if your able to you will have a little faster top speed try it you will see great music too
Wicked 👌🏽👌🏽👌🏽
Haha ..a little bit late, but I build exactly THIS scooter..because of your YT guide !!! I used a grasscutter..a Robin NB411........this motor is exactly a 49cc minibike engine..so parts are easy to buy.
See ua-cam.com/video/NR6wLx0wy-s/v-deo.html
Thank you for your vid!!
I have the same scooter
Cool shit but you ain’t much of a welder 😂💀
I am not much of a welding teacher either 😂 I taught myself and am still learning.
I could give you some tips for sure, you were too cold in this video for sure. Also, tacking ain’t welding remember that! Try some pattern when you are running beads instead of just pushing or dragging straight. That’s about all I can give ya without knowing your gas mixture or wire size. Keep burning man!
Janby el fabo