Awesome Brother!! I had three codes 12-14-64 after turning the bike on to check a new led head light I installed when in the middle of setting my valves with a bunch of wires and such disconnected on my Versys x300. This worked perfect. Thanks man👍
Worked perfectly on a 2017 Z650. I'm still stumped as to when it came on, I wasn't riding in the rain but I did wash the bike the day before. But even then, it didn't come on right away when I was riding the next day. Had the same error code (33). Anyways, thanks for the info!
I'll test it on my vulcan s. it got the cranckshaft error code (21), but the bike it's normal. The dealership in my town wants to charge me $50 to inspect. I'll be back with the feedback of the method
Thanks for the advice! That worked. Note: I didint nedded such time. i got 3 times in the order: 1 - 30sec idle and 4 mint above 40kmh. 2 - 30sec idle and about 10 minutes above 40kmh. 3 - 30sec idle and 14min above 40kmh. on the fourth time the light went off.
Mine got the code because of o2sensor for full system exhaust, do you have recommendations? I already got it to service center to delete then comeback again
@@zx-25rjourney76 so the o2 sensor in the exhaust was soaked by water causing the light to come on? just washed my bike with a pressure washer and the light came on. i’m thinking it’s from the exhaust or radiator
Thank you so much man! So you saved my bike from a trip to the workshop! Thank you so much man!
Awesome Brother!!
I had three codes 12-14-64 after turning the bike on to check a new led head light I installed when in the middle of setting my valves with a bunch of wires and such disconnected on my Versys x300. This worked perfect. Thanks man👍
Thank you Sir! I tried your method and it worked! Though, it took me 5 cycles. Thanks again Sir! 🙏🏻
Thanks a lot, you saved me from going to the repair shop.
thank you so much sir sa video nato!❤ legit nwala ndin ung check engine ng zx25r ko❤
Worked perfectly on a 2017 Z650. I'm still stumped as to when it came on, I wasn't riding in the rain but I did wash the bike the day before. But even then, it didn't come on right away when I was riding the next day. Had the same error code (33). Anyways, thanks for the info!
I hope it works on my Z650 2017 model
Simplemente espectacular!!!!me resulto en mi ZX25R despues de ponerle un full system gracias😊
Could you disconnect the battery and then connect it back? this would reset engine light on most cars :D
Thanks the method was effective for Versys X
Thank you problem solve, life saver
It works perfectly. Thanks 🙏
My oil and engine light only come on when key is on start. When I start the bike it goes off. I have plenty of oil
does this problem comes after u change ur sprocket size ? and u put "U" shape wire on the clutch sensor ?
I am not sure, I only got this light from changing exhaust and then if I ride in wet conditions.
I'll test it on my vulcan s. it got the cranckshaft error code (21), but the bike it's normal. The dealership in my town wants to charge me $50 to inspect. I'll be back with the feedback of the method
Thanks for the advice! That worked. Note: I didint nedded such time. i got 3 times in the order: 1 - 30sec idle and 4 mint above 40kmh. 2 - 30sec idle and about 10 minutes above 40kmh. 3 - 30sec idle and 14min above 40kmh. on the fourth time the light went off.
Does this work on a 2022 Kawasaki klx230?
Mine got the code because of o2sensor for full system exhaust, do you have recommendations? I already got it to service center to delete then comeback again
If it didn't get wet maybe there's problem to sort out
Bro you soke your oxygen sensor in an heavy rain? I got mine to is this the routine?
YEP. When changed to full system there's a problem with o2 sensor when soaked by water.
Actually this is my problem can any one help? Does the video helps?
Does it damage the engine?
@@zx-25rjourney76 so the o2 sensor in the exhaust was soaked by water causing the light to come on? just washed my bike with a pressure washer and the light came on. i’m thinking it’s from the exhaust or radiator
@@blizzthebike if it's aftermarket exhaust apparently it's the oxygen sensor, don't know why it's like that though.
👍
Hello, does it work on kawasaki z900 , problème 33
if same code, it should work
Can confirm works on z900 22 model
How about ninja 400 does this works on ninja 400?
i think so
How about ninja 400 2021?
Yes it works sir
Liked and subed
Is it works for different error code? Mine is 21. Got it after pms
Yes but depends on error, if it's still apparent.
I also got the same code. How do you solve it?
ขออธิบายเป็นภาษาไทยหน่อยครับ
ขออธิบายเป็นภาษาไทยหน่อยดิครับ
1. สตาร์ทเครื่องเดินเบา 30 วินาที ก่อนเริ่มขี่
2. ขี่ให้ต่อเนื่องเป็นระยะเวลา 10 นาที โดยความเร็วเกิน 40 กม./ชม.อย่างน้อย 4 นาที
3. ดับเครื่อง และทำซ้ำแบบนี้ 3-4 รอบ
4. ถ้าสำเร็จ การสตาร์ทครั้งต่อไปไฟจะหายไปเองตามปกติ
Crossing my fingers
ha ha Witchcraft
how about zx6r?
Think so