Another tip is to stand on the other side then the kickstand when you get your mc on the rear stand, that way the bike can not fall to the right since you are preventing this with your body and the bike can not fall the the left since the kickstand will save it, also a lot easier to pull the bike up to balance point rather then to push it up to balance point
I stand on the right side of the bike w/ kickstand down. Already have the paddock stand lined up and contacting the left side spool and centered for the right. Left hand on the stand, push it down while your right hand leans the bike upright, just focus on the right side alignment for the stand to the spool. Has worked great for me over the years but I am only 67 and still have things to learn. Thanks Ari! Your vids are the best
And this is why I love old bikes that come from the factory with a center stand. Not only do they pick up the rear wheel for tyre & chain repairs/adjustments, but if you sit a friend on the pillion, you can also gain forward clearance to remove the front wheel and forks - at which point the reduced weight in front shifts the balance and your friend can get off without the bike doing a nosedive. Very convenient, you carry it everywhere with you, so you can make use of it on the roadside if necessary.
This is genius! Your comment saved me, I'm in this exact situation but was worried about what to do once I get the tire off.. Thanks for the explanation!
@@harrisk.9889 Have you got any beams under the roof, or you could attach a hook into your ceiling? My Honda has a centre so that's cool, and the Harley I strap to a roof beam (mine's an open carport w/o ceiling) whether it's jacked up or not.
Just want to talk about a value purchase... bought my Pitbull stands in 1997~8 when I first got into trackdays and racing. I went the MC mechanic route in 2000 and these things have been used and abused since then. NEVER a problem, always reliable and beyond needing to source the right pin for the front frame stand (which isn't an issue for me now, I've bought them all) they've needed nothing more than some new rubber bits (handles, pads for the rear). I have NEVER had a dropped bike with these stands, even when the bike on a stand Next to mine crumpled and fell into mine. Glad I spent the money so many years ago, they have Absolutely been a "buy it for life" item.
Hey guys, something that was not mentioned in the video is about the turning of the bars to help point the bike left. Something that I've been doing for many years now is turning the bars to the left so that when you pull it off the rear stand it will actually fall left and hopefully won't go right😊. With the bars are straight it sometimes a bit 50/50 unless you've got 100% control over the bike.
Love this! I will say, as someone who has worked on a number of bikes over the past 5 years my $30 harbor freight rear stand has served me VERY well, for several years holding things as 550lb Sportster 1200. Front stands tend to be more complex so I own a pitbull stand for that, and yes there is a quality difference but I wouldn't dismiss affordable stands as an non-viable option
Thought you might mention that Ari has a conflict of interest given that Revzilla wants to sell high quality motorcycle stands instead of us going to Hobo Freight.
Great video. Stuff everyone uses, and not many really understand. Stands are the most basic, yet absolute game changer equipment. Certainly save time, effort and pay for themselves after tire changes not paying the wheel removal fees really quickly. Plus, if one has more motorcycles, same stands take care of all of them, unless single sided swingarm stand is required.
Great stuff! I'm an apartment dweller, so my bike is parked on the street in front of my building and I don't have access to a garage. Therefore, when I was looking for a motorcycle, one of my required criteria was the ability to add a center stand. It makes chain maintenance (among other things) so much easier. I'd love to have a stand and a place to use it, but I find a center stand to be the next best thing in my circumstances.
If you have a bike with a sturdy skid plate you can also use a motorcycle scissor jack or hydraulic motorcycle/atv lift. Just make sure the skid plate has solid attachment points.
It's funny that you guys didn't advertise your own Revzilla "Trackside" stands lol. So are you saying that those are garbage since they are around 60 dollars?
I prefer the Abba stand, can raise the front with nothing in the way and you can remove the swingarm too with the kit if you need too! I should say as soon as I found my bikes had centre stands available I installed them because they're the best option of all IMO.
Came here to say this. For a bike with no centre stand the Abba stands are the best in the world. I’ve had several types of paddock stands and never trusted any of them apart from the Abba stand. Can sit on the bike and jump about and it doesn’t move and never a worry about the bike going over when you try and lift it onto the rear stand.
I don't know if they're available in the US, but in the UK we also have the Abba stand which is a modular stand that fixes to the swing srm pivot so lifts the bike securely. It's not light, but is sturdy and affordabl.
Bruh you've been doing this shit for a long time and STILL killing it as always. I watch these regardless of whether or not I "know" the info already that's how good they are, plus, there's often nuggets I didn't know anyway so its a win-win. ALSO, side note, looks like that burn from the firework on your neck has healed quite nicely.... Although it didn't seem like you were TOO worried about it because you were SHOOTING VIDEOS LIKE THIS WHILE IT WAS STILL HEALING FOR THE WIN. Bruh, mad props..... you're an official icon.
Great episode! I use a rear stand in conjunction with a lift. It makes the bike super stable when I'm working on it, and puts it at a comfortable height too.
Love my Pitbull front and rear stands. I've owned several other brands in the past, but won't go back. Just upgraded my front stand to service the forks. Thanks RevZilla for keeping my garage functional
I'm glad you mention that the front fork stands can be a bit finnicky... the one I use tried to roll around and let the forks come right off. I had to brace it pretty heavily to make sure it couldn't move around on the fork.
I have the pit bull front fork cradle stand, paid more money for it than I should have, and it's so sketchy I won't use it. Just sits up high on a cabinet in the garage like a sad, sick, expensive trophy
I’m coming back to biking after 40 years and I was a surprise to see that the centre stand was now an option and not standard. Weight I suppose but I always have my centre stand and I might not always be near my garage!
I've had my Pitbull rear stand for at least 20 years. I bought the front stand a couple of years later. After a ride, I place the bike on the stands to assist with cleaning, storage and prevention of flat spots in case the next ride is months away.
If you are not using spools on your rear stand, you may want to engage the front brake. I tied an old section of inner tube around the brake lever and throttle. This will keep your bike from rolling back on the rear stand causing all sorts of annoying problems. Spools are definitely the way to go.
Anywhere that sells stuff for PCs will have wiring straps with velcro that are perfect for strapping around the grip and brake lever. Music stores sell them too, for strapping mic cables to stands. You can even get enough pressure on the lever with them to let you bleed the brakes on your own.
Highly suggest finding a little block of wood that can be placed under the side stand. Needs to be low enough to just let the bike lean slightly so it is not at the balance point. This way you can line up the stand from the rear and you don't risk it falling over doing it from one side of the bike.
After many sketchy moments trying to get bikes on paddock stands, I finally bought an abba stand. It' was a really good purchase. Take up little room when you fold it away and is a lot safer to use when you're by yourself and the floor isn't 100% level
Crazy that I have no experience of stands like these because I've only owned bikes with centre stands. Rear wheel can be lifted in seconds, front wheel just takes tipping the bike back (either by hand or with a car jack) and slipping something under to support - I use axle stands with footrest rubbers on top but other options are available!
I'm with you there - I wouldn't buy a bike without a centre stand. How do you service steering head bearings, or swinging arm bearings, using paddock stands?
A guy from work gave me a stand of his he didnt use (he had 2 of them) and man does it make work a million times easier especially when it came to the rear tire. I used to use a combination of (no joke) a car jack, a plank of wood, and 2 jack stands to get my bike off the ground enough to work on.
I didn't know about the front frame stand. That looks really nice. I use my center stand and a regular aluminum jack applied at the front of the double cradle.
Having purchased front and rear stands, then needing to replace a fork seal, I also ended up buying an Abba stand. If that works for your one bike and/or you are willing to buy the adapter kits they sell, that's really the most useful for working on a bike.
Big Abba stand fan too. I added the frontwheel lift kit and the glide so I can manoeuvre it around in my tight garage space. If you have the footpeg kit you can disassemble the bike all the way to its frame. Really love this stand!
Great video - and as a first time bike owner - the stand is a neccesity. My local shop will do a simple tire change for $20/wheel if I bring them just the wheel and tire - under 10 minutes in and out.
Cant beat a center stand. It's the main reason why I never liked new sport bikes, but I finally got one, and I hate using the paddock type stand by myself.
FWIW, I recently added T-Rex spools to my CRF250 Rally. Their kit includes a clamp that goes onto the right swingarm, solving the lack of a spool mounting point on that side.
Thank you Ari for another informative video. You know what you're talking about and present it well. Also props to the video production crew. I'll add a couple of tips that help me. First, I put a 2x4 block under the side stand before I leverage my bike onto the rear stand, this makes the bike nearly vertical and allows the paddock/rear stand to 'catch' the swingarm spools. Then it's worry-free to complete the process of getting the stand under the bike. Second, I make sure the front wheel is pointed straight, for whatever reason, the front wheel turns to the left when my bike is on the side stand.
Today I learned I've been making lifting the bike with the rear stand WAY too hard--thanks for setting me right! And I can confirm, Pitbull makes great stands. One thing I'll add to this is that shaft drive bikes might need more specialized stands due to their design (case in point, my Guzzi V7)
How do you lift your V7? I just bought a basically new 2020 V7 III Racer and I've been trying to figure out how I'm going to lift it once I need to do maintenance tasks...
@@cristianpuiulet1519 So, Pitbull makes a V7-specific rear stand that allegedly works with the III, but isn't officially endorsed for it. MG Cycle, though, sells the SD Workshop Stand, which is officially compatible with the III. I use that in conjunction with a Pitbull front stand that has the frame-pin attachment to get the bike in the air.
I just did the maintenance on mine. I thought about buying one of these. But then I started thinking about ways around it. I used my floor jack on one side, and blocks of scrap wood under the kick stand on the other. The work is done.
My tip for taking it off the rear stand: make sure the bike is in gear. One time I forgot and left it in neutral, and the bike rolled forward as it went down, pushed its own side stand up, and fell.
The other option for rear stands is the front facing handle, like the Pit Bull I bought. I use it in conjunction with a roll in front wheel chock, it holds the bike stable while I lift the rear.
Worth noting, stand on the opposite side of the kickstand incase it falls away from you l, you got the kick stand to hopefully save you. Love these vids keep them coming!!!
Hated the cup stand for the RS125. But love my Harris stand with bobbins. I lift differently, no precarious balancing - just start with side-stand, steering already left, align stand to bobbins, once they’re hooked in (stand is on left caster wheel, held with right hand gently); can grab the rear set with left hand (or frame) and apply pressure with right hand (probably a little nudge with my hip into the bike) - bike automatically goes upright and is steady; push harder to lift up rear wheel.
2 Stands and a mini stool have helped me get through a lot of maintenance and repairs. It's a lot quicker to do the chain and brakes for example. For me I got the cheap stands, and they constantly need looking after. There's a lot of play in the parts, so I'm about to replace with something higher quality.
Also great for safety especially for being able to tell if the front wheel rotates freely. You see lots of accidents where people go from paved to dirt and crash because there's rolling resistance on the front wheel they didn't know about.
Try the ABBA superbike stand. bought the stand and front lift kit plus the swingarm removal kit , you are then sorted for those super difficult jobs. I use it all the time.👍
Excellent and concise explanation about moto stands. After watching your video I am now a believer in stands and will obtain a set forthwith! Thanks for demonstrating how easy they are to use-I was anxiously wondering about that move from kick stand to paddock stand until you showed me how you do it using your left hip and arm to support bike, while lining up stand and moving bike upright. My older model Moto Guzzi has a center stand and along with my MX stand I've always been able to do whatever I needed to do on that bike. My brand new Triumph Speed Twin however, only has a side kickstand, so I was wondering how best to prop-up my bike when I do oil or tire changes. Now I know.
There are also jack lifts - flat tipped jack pads that go ubder your frame - for those with larger bikes. I had to get one because mine was over the max limit on all those style.
i got myself an abba superbike stand (i dont know if other brands sell the same concept) and although its a two parter and needs a bike specific part, it feels so much more stable and safe and same goes for pulling it up and lowering it back down compared to the stands shown.
for the front stands try to find ones that dont block the axel bolt because if your sole purpose is to take the wheel off then that would be an important thing to note. most dont but on theres always a chance
I've uses commercial stands on bikes in the past but when I purchased a Kawasaki Concours 14 I found that there are no such products that will fit and lift the rear wheel. I use an engine hoist to lift the rear of the bike by the luggage rack if I need to service or remove the rear wheel.
I bought and used a pair of Woodcraft stands for my bikes and I can attest to their quality. I'm just now down to one bike and it has a single sided swing arm. Woodcraft states they're working on one to be sold this summer but currently does not offer this option. I'm waiting. Removing the rear tire looks more complex at a glance and may require special tools. I'd love if you'd do a video regarding this. Your tire changing video has saved me plenty in the past and I'd like to continue doing that on my new bike.
Another tip is to flip your footpegs upside down so they dont flex upwards. Then you can place anything under them to lift your bike. I'm currently using some jack stands.
Not surprised to see plenty of people in the comments such as myself that look like they already own stands, but it's Ari so I'm going to watch this anyway! 🏍🏍🏍
Great video. I've been on the hunt for a table or lift so I can take off some rear end parts on my motorcycle and get in there for some wiring work. Seems like a much more compact, cost-effective option for getting the bike up in the air.
If you work on your bike a lot, or plan on buying and work on multiple bikes, you cannot beat a lift table. They make the process so much easier, and your back will thank you. Handy lift is my personal favorite.
Thank you because first thought was, I know all this. Then I watched it through and actually learned something with that ladder and ratchet strap. I have to replace the triple tree of a bike that you can’t get a stand under the case.
Bought a rear Pitbull stand and liked it so much I was about order a front one before finding one at an estate sale. They didn't know what it was and I got it for $15
Ready to add a set of stands to your moto-maintenance arsenal? Revzilla’s got you covered! rvz.la/3mZKuZh
Why wait 15 hours to upload a video
ready to pull out a ladder and some straps!
Why is Revzilla no longer carrying Pit Bull stands? I just looked a few days ago to get a front stand and did not see any Pit Bull options anymore.
Ladder and rachet straps, HILARIOUS!!
*Jack stands for Harley and Triumphs?*
Another tip is to stand on the other side then the kickstand when you get your mc on the rear stand, that way the bike can not fall to the right since you are preventing this with your body and the bike can not fall the the left since the kickstand will save it, also a lot easier to pull the bike up to balance point rather then to push it up to balance point
Too bad my dominant hands is right. For left-handed this is golden.
@@kingnfs1 This is coarse movement so it shouldn’t matter which hand is dominant since it doesn’t require finesse.
Maybe, but not being able to see the side stand is nerve wracking for many of us.
Makes sense.
@@kingnfs1I am left handed.
I stand on the right side of the bike w/ kickstand down. Already have the paddock stand lined up and contacting the left side spool and centered for the right. Left hand on the stand, push it down while your right hand leans the bike upright, just focus on the right side alignment for the stand to the spool. Has worked great for me over the years but I am only 67 and still have things to learn. Thanks Ari! Your vids are the best
And this is why I love old bikes that come from the factory with a center stand. Not only do they pick up the rear wheel for tyre & chain repairs/adjustments, but if you sit a friend on the pillion, you can also gain forward clearance to remove the front wheel and forks - at which point the reduced weight in front shifts the balance and your friend can get off without the bike doing a nosedive. Very convenient, you carry it everywhere with you, so you can make use of it on the roadside if necessary.
This is genius! Your comment saved me, I'm in this exact situation but was worried about what to do once I get the tire off.. Thanks for the explanation!
You have to remember to tighten chain only on sidestand. In center stand, when wheel goes down it will be stiff like guitar string.
@@harrisk.9889 Have you got any beams under the roof, or you could attach a hook into your ceiling? My Honda has a centre so that's cool, and the Harley I strap to a roof beam (mine's an open carport w/o ceiling) whether it's jacked up or not.
Ari always gives the best advice, I hope you guys never stop making these videos.
Dude's legit. Big fan.
Just want to talk about a value purchase... bought my Pitbull stands in 1997~8 when I first got into trackdays and racing. I went the MC mechanic route in 2000 and these things have been used and abused since then. NEVER a problem, always reliable and beyond needing to source the right pin for the front frame stand (which isn't an issue for me now, I've bought them all) they've needed nothing more than some new rubber bits (handles, pads for the rear). I have NEVER had a dropped bike with these stands, even when the bike on a stand Next to mine crumpled and fell into mine.
Glad I spent the money so many years ago, they have Absolutely been a "buy it for life" item.
+1. Pitbull is what I have in my garage and they're excellent.
Hey guys, something that was not mentioned in the video is about the turning of the bars to help point the bike left.
Something that I've been doing for many years now is turning the bars to the left so that when you pull it off the rear stand it will actually fall left and hopefully won't go right😊.
With the bars are straight it sometimes a bit 50/50 unless you've got 100% control over the bike.
Love this! I will say, as someone who has worked on a number of bikes over the past 5 years my $30 harbor freight rear stand has served me VERY well, for several years holding things as 550lb Sportster 1200. Front stands tend to be more complex so I own a pitbull stand for that, and yes there is a quality difference but I wouldn't dismiss affordable stands as an non-viable option
Would have posted the same if you hadn't. Promo shots for the new $92k Indian track bike have that exact stand in them.
Thought you might mention that Ari has a conflict of interest given that Revzilla wants to sell high quality motorcycle stands instead of us going to Hobo Freight.
This was exactly the video I was looking for buying a pair of stands two years ago 😆 glad it’s here for new riders now 👍🏻
Would love to see a whole service shops manual episode! Everything you should do during a service, how and why!!!
Great video. Stuff everyone uses, and not many really understand. Stands are the most basic, yet absolute game changer equipment. Certainly save time, effort and pay for themselves after tire changes not paying the wheel removal fees really quickly. Plus, if one has more motorcycles, same stands take care of all of them, unless single sided swingarm stand is required.
Great stuff! I'm an apartment dweller, so my bike is parked on the street in front of my building and I don't have access to a garage. Therefore, when I was looking for a motorcycle, one of my required criteria was the ability to add a center stand. It makes chain maintenance (among other things) so much easier. I'd love to have a stand and a place to use it, but I find a center stand to be the next best thing in my circumstances.
These kinds of stands fold down to nothing and will fit in a cupboard or under your bed.
@@Starfireaw11 center stands are still better
Good reminder on stand use. I'm another happy Pit Bull stand owner. Bought 13 years ago and still doing the job.
You forgot to mention some options for single sided swing arms however it is still a great video! (as always)
Such like most BMWs? A had the same thoughts. May be somebody has an answer.
Hey Ari I already have my shop manual Kershaw cryo
If you have a bike with a sturdy skid plate you can also use a motorcycle scissor jack or hydraulic motorcycle/atv lift. Just make sure the skid plate has solid attachment points.
It's funny that you guys didn't advertise your own Revzilla "Trackside" stands lol. So are you saying that those are garbage since they are around 60 dollars?
@znismo1 look above your comment 😅
I can watch Ari work on bikes for days :3
I was today years old when I learned the secondhand Pitbull stands I was gifted have reversible mounts LOL. Thanks Ari!!
I prefer the Abba stand, can raise the front with nothing in the way and you can remove the swingarm too with the kit if you need too! I should say as soon as I found my bikes had centre stands available I installed them because they're the best option of all IMO.
Came here to say this. For a bike with no centre stand the Abba stands are the best in the world. I’ve had several types of paddock stands and never trusted any of them apart from the Abba stand. Can sit on the bike and jump about and it doesn’t move and never a worry about the bike going over when you try and lift it onto the rear stand.
@@JImBo176 Link?
I’ve had Pitbull front and rear for 20 years but recently bought a Bursig center lift stand and it changed my world. No comparison.
Cycle gear has a universal stand I have used for years. It works on bikes with spools 15.75” across. And works with bikes without spools. $100
I don't know if they're available in the US, but in the UK we also have the Abba stand which is a modular stand that fixes to the swing srm pivot so lifts the bike securely.
It's not light, but is sturdy and affordabl.
Bruh you've been doing this shit for a long time and STILL killing it as always. I watch these regardless of whether or not I "know" the info already that's how good they are, plus, there's often nuggets I didn't know anyway so its a win-win. ALSO, side note, looks like that burn from the firework on your neck has healed quite nicely.... Although it didn't seem like you were TOO worried about it because you were SHOOTING VIDEOS LIKE THIS WHILE IT WAS STILL HEALING FOR THE WIN. Bruh, mad props..... you're an official icon.
Great episode! I use a rear stand in conjunction with a lift. It makes the bike super stable when I'm working on it, and puts it at a comfortable height too.
Agreed, the platform lift is really the way to go. Comfortable height and no stress from the bike 'almost' falling over every other minute.
Love my Pitbull front and rear stands. I've owned several other brands in the past, but won't go back. Just upgraded my front stand to service the forks.
Thanks RevZilla for keeping my garage functional
I'm glad you mention that the front fork stands can be a bit finnicky... the one I use tried to roll around and let the forks come right off. I had to brace it pretty heavily to make sure it couldn't move around on the fork.
I have the pit bull front fork cradle stand, paid more money for it than I should have, and it's so sketchy I won't use it. Just sits up high on a cabinet in the garage like a sad, sick, expensive trophy
New most of this already, but the tip with the ladder and the straps is golden!!! Could have used this technique already a few times. Great tip!
I loved the idea of using ladders to change the rear shock! Many thanks, need to try it! :)
does it make sense to also lock the front brake with some duck tape ?
Lovely!!
I didn't know that christoph waltz likes motorcycles!!
You are an inglorious motorcyclist mr Christoph!!!
Nice 👍
I’m coming back to biking after 40 years and I was a surprise to see that the centre stand was now an option and not standard. Weight I suppose but I always have my centre stand and I might not always be near my garage!
I've had my Pitbull rear stand for at least 20 years.
I bought the front stand a couple of years later.
After a ride, I place the bike on the stands to assist with cleaning, storage and prevention of flat spots in case the next ride is months away.
If you are not using spools on your rear stand, you may want to engage the front brake. I tied an old section of inner tube around the brake lever and throttle. This will keep your bike from rolling back on the rear stand causing all sorts of annoying problems. Spools are definitely the way to go.
Or leave the bike in gear
Anywhere that sells stuff for PCs will have wiring straps with velcro that are perfect for strapping around the grip and brake lever. Music stores sell them too, for strapping mic cables to stands. You can even get enough pressure on the lever with them to let you bleed the brakes on your own.
@@mark222b Doesn't help if the back wheel is off the ground.
@@gerryjamesedwards1227 good point! now I know, thanks! am just about to put the bike on a stand for an oil change, and it's on a very slight slope.
Highly suggest finding a little block of wood that can be placed under the side stand. Needs to be low enough to just let the bike lean slightly so it is not at the balance point. This way you can line up the stand from the rear and you don't risk it falling over doing it from one side of the bike.
After many sketchy moments trying to get bikes on paddock stands, I finally bought an abba stand. It' was a really good purchase. Take up little room when you fold it away and is a lot safer to use when you're by yourself and the floor isn't 100% level
Crazy that I have no experience of stands like these because I've only owned bikes with centre stands. Rear wheel can be lifted in seconds, front wheel just takes tipping the bike back (either by hand or with a car jack) and slipping something under to support - I use axle stands with footrest rubbers on top but other options are available!
I'm with you there - I wouldn't buy a bike without a centre stand. How do you service steering head bearings, or swinging arm bearings, using paddock stands?
A guy from work gave me a stand of his he didnt use (he had 2 of them) and man does it make work a million times easier especially when it came to the rear tire. I used to use a combination of (no joke) a car jack, a plank of wood, and 2 jack stands to get my bike off the ground enough to work on.
I’ll take an ABBA stand over front and rear stands any day of the week. Bomb proof!
I didn't know about the front frame stand. That looks really nice. I use my center stand and a regular aluminum jack applied at the front of the double cradle.
I so miss a center stand on my newest bike....
Front wheel cradle type stands are super handy for getting your bike upright and on to a rear stand. Also super handy for truck loading.
What about the built-in center stand?
Saves you a lot of trouble 👍
Ari you do a great job!!🏁
Having purchased front and rear stands, then needing to replace a fork seal, I also ended up buying an Abba stand. If that works for your one bike and/or you are willing to buy the adapter kits they sell, that's really the most useful for working on a bike.
Big Abba stand fan too. I added the frontwheel lift kit and the glide so I can manoeuvre it around in my tight garage space. If you have the footpeg kit you can disassemble the bike all the way to its frame. Really love this stand!
Abba sky lift is even better if you can stretch to one. Got mine used about 7yrs ago for £250 and used it loads 😊
@@ArieOvich Also have the front lift kit. That's how I did the fork seal. It's cool that there are so many options.
@@trevorphillips3055 Those are pretty expensive in the US. And very rare so unlikely to find a used one. You got a deal.
Love from INDIA 🇮🇳
To most of us using mopeds and scooters with 200cc and below engine, center stands is already built-in and we often use it in the Philippines.
Great video - and as a first time bike owner - the stand is a neccesity. My local shop will do a simple tire change for $20/wheel if I bring them just the wheel and tire - under 10 minutes in and out.
Cant beat a center stand. It's the main reason why I never liked new sport bikes, but I finally got one, and I hate using the paddock type stand by myself.
FWIW, I recently added T-Rex spools to my CRF250 Rally. Their kit includes a clamp that goes onto the right swingarm, solving the lack of a spool mounting point on that side.
Thank you Ari for another informative video. You know what you're talking about and present it well. Also props to the video production crew.
I'll add a couple of tips that help me. First, I put a 2x4 block under the side stand before I leverage my bike onto the rear stand, this makes the bike nearly vertical and allows the paddock/rear stand to 'catch' the swingarm spools. Then it's worry-free to complete the process of getting the stand under the bike. Second, I make sure the front wheel is pointed straight, for whatever reason, the front wheel turns to the left when my bike is on the side stand.
Good tips, thanks Matthew!
Thanks dude. All I have to do now is buy one for my bike. And you are right. I'll get a good one. THanks.
I bought a cheap HF stand years ago. Works perfect.
Thanks for answering questions that I'm too embarrassed to ask. 67, and still learning
Today I learned I've been making lifting the bike with the rear stand WAY too hard--thanks for setting me right! And I can confirm, Pitbull makes great stands.
One thing I'll add to this is that shaft drive bikes might need more specialized stands due to their design (case in point, my Guzzi V7)
How do you lift your V7? I just bought a basically new 2020 V7 III Racer and I've been trying to figure out how I'm going to lift it once I need to do maintenance tasks...
@@cristianpuiulet1519 So, Pitbull makes a V7-specific rear stand that allegedly works with the III, but isn't officially endorsed for it. MG Cycle, though, sells the SD Workshop Stand, which is officially compatible with the III. I use that in conjunction with a Pitbull front stand that has the frame-pin attachment to get the bike in the air.
@@ScoutingForZen I have a V7 III so this is helpful. thanks.
This makes me want a center stand mounted on my bike even more 😅 I use the same process for now though.
Love these video's. I especially love the video's you and Zack make. I missed you on the trip to India. Keep it up.
I’ve always wondered how those rear stands worked. Great video.
Quality stands can last forever. I bought Pit-Bulls in 1999, and I still use them today. Theyre still 100%.
so glad my bike has center stand... makes a lot of things easier
Thank you Kevin Harvick now as a motorcycle newbie I know the benefits of a motorcycle stand.
(This was meant as a genuine thanking while mentioning the facial similarity to a NASCAR driver)
I just did the maintenance on mine. I thought about buying one of these. But then I started thinking about ways around it.
I used my floor jack on one side, and blocks of scrap wood under the kick stand on the other. The work is done.
My tip for taking it off the rear stand: make sure the bike is in gear. One time I forgot and left it in neutral, and the bike rolled forward as it went down, pushed its own side stand up, and fell.
Best video yet about stand purchase and use. Thank you.
The other option for rear stands is the front facing handle, like the Pit Bull I bought. I use it in conjunction with a roll in front wheel chock, it holds the bike stable while I lift the rear.
I have this too. A little tricky at times.
Absolutely love your videos. You guys have educated me on so many things already and now this.
Thanks for holding our hands throughout this journey 🙏
Worth noting, stand on the opposite side of the kickstand incase it falls away from you l, you got the kick stand to hopefully save you. Love these vids keep them coming!!!
Good tips... but what about single sided swingarms??
Hated the cup stand for the RS125. But love my Harris stand with bobbins.
I lift differently, no precarious balancing - just start with side-stand, steering already left, align stand to bobbins, once they’re hooked in (stand is on left caster wheel, held with right hand gently); can grab the rear set with left hand (or frame) and apply pressure with right hand (probably a little nudge with my hip into the bike) - bike automatically goes upright and is steady; push harder to lift up rear wheel.
glad my bike comes with center stand
2 Stands and a mini stool have helped me get through a lot of maintenance and repairs. It's a lot quicker to do the chain and brakes for example.
For me I got the cheap stands, and they constantly need looking after. There's a lot of play in the parts, so I'm about to replace with something higher quality.
Also great for safety especially for being able to tell if the front wheel rotates freely. You see lots of accidents where people go from paved to dirt and crash because there's rolling resistance on the front wheel they didn't know about.
What do you mean by that? I'm unfamiliar with that; I've never had any problems transitioning between terrains. Do it everyday
As always, the Shop Manual coming in clutch with the great info.
Try the ABBA superbike stand. bought the stand and front lift kit plus the swingarm removal kit , you are then sorted for those super difficult jobs. I use it all the time.👍
what a great video. this is EXACTLY what I've been looking for. another Great Revzilla video.
Brilliant! Thanks for posting/sharing. Cheers!
Excellent and concise explanation about moto stands. After watching your video I am now a believer in stands and will obtain a set forthwith! Thanks for demonstrating how easy they are to use-I was anxiously wondering about that move from kick stand to paddock stand until you showed me how you do it using your left hip and arm to support bike, while lining up stand and moving bike upright. My older model Moto Guzzi has a center stand and along with my MX stand I've always been able to do whatever I needed to do on that bike. My brand new Triumph Speed Twin however, only has a side kickstand, so I was wondering how best to prop-up my bike when I do oil or tire changes. Now I know.
There are also jack lifts - flat tipped jack pads that go ubder your frame - for those with larger bikes. I had to get one because mine was over the max limit on all those style.
i got myself an abba superbike stand (i dont know if other brands sell the same concept) and although its a two parter and needs a bike specific part, it feels so much more stable and safe and same goes for pulling it up and lowering it back down compared to the stands shown.
Learn something everyday, both from this video and from the comments 🙌🏾
for the front stands try to find ones that dont block the axel bolt because if your sole purpose is to take the wheel off then that would be an important thing to note. most dont but on theres always a chance
I tend to use a rear stand and a trolley jack on the sump when i need to take the front wheel off. Not recommended but works
Ari, I'd love to see you do a review of the Abba Skylift stand. Everyone I know who's bought one agrees it's something they can never do without.
I've uses commercial stands on bikes in the past but when I purchased a Kawasaki Concours 14 I found that there are no such products that will fit and lift the rear wheel. I use an engine hoist to lift the rear of the bike by the luggage rack if I need to service or remove the rear wheel.
this tutorial has been extremely helpful. Thank you so much
Wish I had seen this video before purchasing, now to make the best of what I have for a while.
I bought and used a pair of Woodcraft stands for my bikes and I can attest to their quality. I'm just now down to one bike and it has a single sided swing arm. Woodcraft states they're working on one to be sold this summer but currently does not offer this option. I'm waiting. Removing the rear tire looks more complex at a glance and may require special tools. I'd love if you'd do a video regarding this. Your tire changing video has saved me plenty in the past and I'd like to continue doing that on my new bike.
Abba Stands here in the UK!! The all in one stand
Another tip is to flip your footpegs upside down so they dont flex upwards. Then you can place anything under them to lift your bike. I'm currently using some jack stands.
Great video. The pitbull stands (and trailer restraint) are great products. Highly recommend.
Abba sky lift stand is the best option for me working on my motorcycle.
Ladder and ratchet straps? Brilliant! I won't be using that on my Versys 1000 but my 1976 CB550K will probably be perfect on that
Excellent video
Not surprised to see plenty of people in the comments such as myself that look like they already own stands, but it's Ari so I'm going to watch this anyway! 🏍🏍🏍
Great video. I've been on the hunt for a table or lift so I can take off some rear end parts on my motorcycle and get in there for some wiring work. Seems like a much more compact, cost-effective option for getting the bike up in the air.
If you work on your bike a lot, or plan on buying and work on multiple bikes, you cannot beat a lift table. They make the process so much easier, and your back will thank you. Handy lift is my personal favorite.
Hehe , the ladder stand trick i like that one. Can be handy.👍👍
Thank you because first thought was, I know all this. Then I watched it through and actually learned something with that ladder and ratchet strap. I have to replace the triple tree of a bike that you can’t get a stand under the case.
Got to love and laugh about the last bit.
Thanks Ari!
I got the pitbull rear spool stand that has the lever on the side - greatest stand eveerrrrrrrr
Ari, I always enjoy your videos. Zack is great as well. You are both an excellent team. Keep up the great work. Dave from Canada
Bought a rear Pitbull stand and liked it so much I was about order a front one before finding one at an estate sale. They didn't know what it was and I got it for $15
I always drape a towel over the front fender when lifting or lowering a motorcycle with the front frame stands. Less chance of scratching the fender.