Cara pasang mesh menggunakan M2A Mesh Stretcher. How to remesh Screen remesh Untuk pertanyaan dan tempahan M2A Mesh Stretcher sila Whatsapp ke +60133430305
It took me a couple of years to understand how these four side clamp and tread stretcher works. I watched UA-cam a lot, and looked at a lot of images. Because no screen printer in my area uses such method. They all used their bare hands to do the stretching (Which is very cumbersome and does not give good tension) and they still don't know that they are screen stretchers out there. So I finally and finally arrived at making one like yours (24 x 24 inch angle stretcher with 20 clamps (nut and bolt) and square pipes, with 4 nut and bolt treading under a cool budget of 80 dollars. For mine I don't go round it because I attached the square pipes together and a bearing under to rotate while standing in one side and treading. Thanks from Ghana.
![[SCREEN PRINTING] HOW TO INSTALL M2A MESH STRETCHER PART (SPEC BASIC)](http://i.ytimg.com/vi/-u-1fnOomsY/mqdefault.jpg)
It took me a couple of years to understand how these four side clamp and tread stretcher works. I watched UA-cam a lot, and looked at a lot of images. Because no screen printer in my area uses such method. They all used their bare hands to do the stretching (Which is very cumbersome and does not give good tension) and they still don't know that they are screen stretchers out there. So I finally and finally arrived at making one like yours (24 x 24 inch angle stretcher with 20 clamps (nut and bolt) and square pipes, with 4 nut and bolt treading under a cool budget of 80 dollars. For mine I don't go round it because I attached the square pipes together and a bearing under to rotate while standing in one side and treading. Thanks from Ghana.
Great..Good luck sir 👍
Very good friend, After a few days the fabric of the canvas stabilizes in how many Newtown? thank you greetings from Brazil.
yes usually the tension will decrease after the mesh is removed from the stretcher and it is normal.
very very very very awsome machine!!!
Itubukuran berapa ya besinya pakek besi Holow semua ?
mantullll
salam boss, ade jual x? kalau ade boleh bagi contact utk dihubungi?
Alatnya ga jual om??
Ini saya beli pakei sendiri aja om... cuma saya tolong promote bantu teman yang bikin alatnya.
bang ada buat tak benda tu...klu ada sy nak bang...
De que país y precio se puede para LIMA PERÚ
👍
Beli alatnya penarik kain screen dimana mas
Ini bikin sendiri mas
what is the mesh count you use in here sir?
120T/305 mesh
Mas klo beli bisa ga?
Berapa om
sudah tidak produksi lagi om sekarang. maaf ya om
Pake lem apa pak
ini pake Dunlop lem mas.
Lem Foxconn bisa pak
Kya. Ret
Harganya brp pak ?
tidak di jual ini mas
Lem Fox