1/10 RocHobby/FMS Mashigan! First run and Thoughts!
Вставка
- Опубліковано 5 вер 2024
- Checking out the newest release from FMS/RocHobby. The 1/10 Mashigan! This thing is beautiful and drives really well. A couple small issues but for the price this thing is a great rtr. Let’s check it out!
Get the 1/10 Mashigan here from FMS
www.fmshobby.c...
1/10 Mashigan Available here from FairRc
www.fairrc.com...
Don’t forget to check out Black Friday deals at FMS here
www.fmshobby.c...
Check out Tinker Time RC here
tinkertimerc.com/
Check out Shaka Hobbies here
www.shakahobbi...
Order from FMS site and use 2FMRC discount code $10 off complete truck purchase here
www.fmshobby.c...
Max Smasher (white) from FairRc available here
shrsl.com/3rdcr
Max Smasher (blue) from FairRc available here
shrsl.com/3rdco
High Speed Motor for Max Smasher here
shrsl.com/3rdd7
Heatsink for motor available here
shrsl.com/3rdd9
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CcTUCN
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.c...
Amazon affiliate link
amzn.to/3aY2lK7
RCAWD affiliate link here
rcawd.com/?ref...
Don’t forget the discount code 2fmrc at Furitek!
Don’t forget to use the DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
Furitek lizard ultimate here
furitek.com/se...
Video on how to change servo connectors here
FCX24 Servo Connector Swap with no Soldering! Shorten your wires or change connectors EASILY!
• FCX24 Servo Connector ...
Weights I mentioned found here
amzn.to/3VsZcVp
FMS High Speed motor found here
shrsl.com/3qqab
FMS Heatsink for motor here
shrsl.com/3qsew
Samix wheel hex available here
Injora Wheel nuts found here
www.injora.com...
Metal gear diff found here
shrsl.com/3qo0v
HELP SUPPORT the channel by clicking my affiliate links below to amainhobbies or amazon and then shopping at no extra cost to you!
Thanks for any help!
Fcx24 Front Portal axles found here
shrsl.com/3ma33
FCX24 Rear Portal Axles found here
shrsl.com/3ma3h
FCX24 $6 Motor upgrade found here
www.ebay.com/i...
Extended links for the fcx24 found here
Link kit available here
www.ebay.com/i...
Contact me at 2fastmattracing@gmail.com
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
High clearance links used found here
amzn.to/3NfOJaj
RC4WD Stamped steel Wheels used found here
bit.ly/3ntbRbc
RC4WD Scramblers found here
bit.ly/3FT3GgA
Other upgrades found here
Injora brass wheel rings found here
amzn.to/3zVGWM1
Wheel hex extenders used found here
amzn.to/3Oh8FLy
Stock Scx24 driveshaft (long) used for rear
amzn.to/3ndGhOk
FMS FCX24 available here in yellow
amzn.to/39OSMwU
FMS FCX24 available here in blue
amzn.to/3HHAHgJ
FMS FCX24 available here in red
amzn.to/3Oyjvwd
TOOLS I USE FOUND HERE
T-handle wheel wrench I use here
bit.ly/3qst079
WORK MAT I USE FOUND HERE
amzn.to/39gcXUb
MIP .050 hex found here
bit.ly/3xOvi45
MY FAVORITE TIRES BELOW
Injora 64mm Hyrax
amzn.to/3fmOShr
Power Hobby Trail Warriors found here
www.powerhobby...
Rc4wd Scramblers
bit.ly/3FT3GgA
MY FAVORITE ELECTRONICS BELOW
My favorite SERVO for the price (agfrc)
amzn.to/3xJbb7r
Another great BUDGET servo here (Emax)
bit.ly/2SjZXUx
My favorite ESC found here
bit.ly/39jhrtc
My favorite BRUSHLESS motor here
bit.ly/3MIMEU3
My favorite BRUSHED motor here
www.ebay.com/i...
That's why I'm subscribed to your channel. Find the weaknesses and then fix it! A couple years ago I built a wild Orlandoo Hunter modified to the max and then SNAP! It sheared the hollow pins that hold the driveshafts together... So I used some solid metal sewing needles to replace the hollow pins. Hasn't broke since! That's the best way to RC!
Very good looking scale rig! I'd be interested to see a build series on this one with you swapping out electronics (maybe one of the new HW Fusion Pro's and a legit servo), playing with gearing (seems like it would benefit from a smaller pinion gear), running some more scale tires (KM3's!), and fixing any stuff that breaks along the way. Would be cool to see if this rig could be made into a cheap class 1 or scale class 2 crawler.
The scalebuilders youtube guy did a nice visual upgrade on this thing worth checking out for more eye candy! Also other Rc guys have taken the trans apart , its looking not to promising for gear swapping because the gear layout and design. I think a 5 pole brushed might be a good swap. Also the better hobbywing speed control for silent motor without that whine.
this thing shares the trans from the 1/6 vehicles and unfortunatly u cant change the gearing which is to bad. i ended up putting in a 80turn rc4wd yes 80t and on 3s still has wheel speed but crawls much better with a hobbywing1080, ill be replacing that with the fusion se in a 1200kv when they are available though in both the jimney and this rig. the elc in both are craaaaaap. wish they sold a kit version of thier trucks to save some money as 99% of people trash the elc anyways
Bummer about the doors not staying shut. I saw other videos but they didn’t run it on the rocks. They were more trailing it.
frozen creek! Loved the donuts!
As always great scale looking rig. With some light customization this could be a killer rig. But if you're a jeep guy this is a great shelf queen.
Hopefully FMS will make it better on the next one due to all the reviews. Thanks for sharing. 👍
I’d love to have the green one
Nice review, Matt. It's great to see some more outdoor videos from you. We'll see if RocHobby are going to come up with a response to the latch issues.
Thanks! I definitely gave it a beating so I don’t think most will have much issue with this one. They were on top of it and had already asked me to report any issues so they could work on them. So I feel like they’ll do what they can!
Looks pretty awesome Matt , Bummer about the tailgate and doors and hood Opening Yep we’re watching
Thanks for the review. Will save me the money!
Happy Thanksgiving! I actually ordered one earlier.
Very good review, Looks very nice without the hard top but with the top it needs full doors
🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
Really appreciate that! I agree some full doors would look great with the top.
*Very cool*
👍I like it!Looks like it needs alot more weight added to it though for sure.
Nice review
Whoah.. Your sh*t just wont stay latched will it.!?
Your's is about the 5th or 6th review I've watched & I didn't notice them having those issues.!
I feel bad for you, I hope it doesn't spoil your experience with it...
Saying that, I do think your review was the toughest testing so far.
I'm thankful for you doing that for us because a lot of channels baby their RCs & don't really show us all the potential issues.
There's nothing worse than wanting a new rig, watching tons of reviews only to find out it's not as tough as it seemed.!
Thank you for doing this for us...
Please stay safe out there & best wishes from Scotland.!
Yeah I was really hard on mine. The latches struggled to keep up lol. Overall I enjoyed the truck and it held up well for the beating I gave it. Really appreciate your comment! That’s the entire reason I run them hard. Because people need to know what it can handle or can’t handle! Thanks again 🙏
That's a nice looking truck, for sure, and some nice driving. The price is pretty nice too, compared to other hardbody RTRs, that often seem to handle worse than this ting.
Too bad about the tailgate. The doors popping open doesn't come as a surprise. I have the Injora Jeep hardbody with the roll cage and tube doors on my SCX10 II, and the doors kept popping open all the time. One even broke off once, when I did the same as you, and just gave up on closing them all the time. Now they are glued in place with some superglue. 😅
Beautiful rig! And thanks for being so hard on it! FMS is sending me one, gonna see how far I can go in terms of modding and roaching it out into a crawler with all FMS parts. Bummer about the doors, but I've got a glue gun. 2.2s? 👀
I was thinking 2.2 myself.
Great and honest review. Thank you
This thing looks like it has potential. Good video, I was wondering about these.
That thing is a beast. Doesn't seem too too bad
Not at all! It took a beating for sure lol
That is awesome man! Always like your videos.
Those tires are injora you can buy them premounted on beadlocks and that's what I have on all my 1/10 scale stuff love them. They get softer the more ya run them
Yeah I actually bought a set years ago and they were horrible. The compound on the knockoff tires have changed a lot in the last year. These are actually pretty good I think!
They work well where I live and they get soft over time. We have dusty rocks and sandy soil that gets sun baked which makes it really slippery and loose dirt in the fields they hook up good on all of it. They are fair in the snow if you spray some WD-40 on
awsome vid and info. thanx for posting this, i just picked one up as i owned a yj and luved that jeep. have u done any thing to the shocks? i find the springs wayyyy to stiff. they are a weird size spring of course....looking for some info on changing the springs out as to what other springs may fit if u have any info. thanx again for all your awsome vids
second review I've seen saying the back gate broke :-\
Yeah the rear gate had no chance. It wouldn’t stay shut at all. The doors and hood held decent to start.
🤘🏻🦑
Little disappointing, but very sharp looking rig. Will be nice to see what you do with it and how it holds up.
Offers more than redcat and CEN
Any word of when they will settle the issue with the jeep brand? And hopefully bring it back as a version 2 with the corrections and improvements needed but they become official!
Hopefully it's a 3 wire servo!
It is! It’ll be changed for sure lol
God I hope they make this body available separately. Iv been dying for one with a removable top
They have them already 🤘 They are sold in pieces so I’m not sure how expensive it is to complete it but here the main body
shrsl.com/3ta8a
@@2fmrc thank you so much!!!
Nice video
Glue the tailgate on
They actually have replacements for like $12 so I’m going to get a new one and put a magnet or something in place to help hold it shut hopefully!
be cool if they make a Suzuki samurai
You can use a 3s battery
Yeah I ran mine on 3s
What are your plans with the doors and hood latches?
Probably just glue a tiny magnet somewhere sort of hidden that’ll help hold them. They just need a tiny bit of help lol
I dunno 😕 about this, for me 325 is just kind of expensive for just a cool case 😉 😉 seems a little fragile so I guess why the case is so nice.
Right on for testing it’s limits, what brand size etc 2s you recommend?
Gotta see if anyone supplies those rubber latch-straps for the hood that real YJ’s have?
I'd say for trying to rock crawl a trail truck and beating the shit out of it its a winner lol
I totally agree! I took it through much more than most will. I normally wouldn’t be that hard on it but gotta test it lol