How to install a commercial panic bar push bar with lever lock
Вставка
- Опубліковано 21 сер 2023
- How to install a panic bar on a commercial door. How to install a push bar on a commercial door. Commercial grade lever lock installation how to. How to install a commercial lock on a commercial steel door.
Learn how to install doors and repair doors and you can make money with door installation and door repair skills. How to install a door and how to install door locks are skills that will make money and get you paid.
More information and recommended watchlist at www.askillthatpays.com
This is the best channel to learn how to install and repair doors because I show you all the steps of door installation and show videos of multiple types of door installation and door repairs.
You can make money installing doors and repairing doors and I show you how. When it comes to learning how to install doors and how to repair doors, there is nothing quite like my clear step by step process for door installation and door repair. My videos show you how to use all the tools like routers, power planers, drills, drivers, circular saws and more. Once you learn these techniques, you will have a skill that pays, and you could make a living as a door installer. - Навчання та стиль
Your the best brother , my dad and I were a bit confused installing these panic door.
With this video we got it to work to perfection life saver !!
Love to hear that. So happy to share some knowledge. Thanks for watching.
@@askillthatpays will subscribe as well , your the man!!
Thanks for explaining everything so clearly. Hard to find instructions for these
Glad it was helpful!
Thank you so much for sharing this with us nice video and good explanation 👍🏼👍🏼👍🏼
You're welcome. When I started installing these, there was nobody to help so I'm happy to post these. Thanks for watching
Cool video, I'm not in the trade but do have a small project where a similar door will be installed and I like to keep myself somewhat knowledgeable on what is being installed on my property.
Glad you enjoyed it. There are so many different types of locks and hardware in the door trade and even though I've been doing this 15 years, I'm not familiar with EVERYTING, so I try to help people out by sharing the things I run across. Thanks for watching.
Great video and explanations. Thanks!
You're very welcome. Glad you enjoyed it and thanks for stopping by to watch
Excellent video.
Glad you enjoyed it. I've done so many of these and I'm happy to pass along some knowledge.
Great video! I'm also in the trade, don't forget to explain how to level the bush bar before screwing the tail bracket.
LOL. I work with guys like you. I always just eye it up and they start screaming at me to grab the level. All good. Thanks for watching.
Great job 👏
Thanks for watching. I appreciate it
Great video. I like the way the thru bolts go through the center hole instead drilling new holes in the door. Where could I find this model?
These panic bars were all supplied by a commercial door supplier and part of a large job. I do not recall the brand. However, I've had great luck at buydoorhardwarenow.com. I have no affiliation with them, but they have a good variety of door hardware. Thanks for watching
I need to install this same configuration in a door that is 4" thick. Is there a way to extend the parts needed to do this? Great video, thank you!
Yikes, that's a big one. I would find a local commercial locksmith or contact a place that really knows this stuff like doorhardware.com. IN Nashville I use nashvilledoorcloser.com for all my commercial parts. I've obtained extension parts for gates that were 2.5" thick, but 4" could be a challenge. Good luck and thanks for watching.
What model is that push bar with the lever? Thank you so much for the video
I don't recall that brand. I did 8 doors on that job and the client had purchased everything from a vendor and had it onsite when I arrived. Most push-bars can accept a Lever or knob as long as they match the configuration of the hardware. Home Depot sells a brand called "Universal" and they have a standard pull or lever that matches. Thanks for watching.
I'm working on a door where the handle snaped in half and I need to replace the handle but I can't get it off.
I would look up the specs/intructions for that type of handle or cut it off with a reciprocating saw or angle grinder. I've done both. Sometimes screws get stripped or corroded or you simply can't figure it out, so cut it off without damaging the door and start from scratch. Good luck and thanks for watching.
@@askillthatpays thanks for the reply. I'll do that.
What hardware is this you used?
I don't recall. It was supplied by the client, but they all work the same basic way. Home Depot sells the Universal brand push bar and it has the same mechanism. Thanks for watching.