Thank you Marky! Sobrang HELPFUL 1milliontimes ng channel mo! Nabitin ako sa part 02! Please add more to this series so we can complete practicing this house. :) #newbie
thanks for the tutorial sir, btw do you have a video on how to align the cad and revit base points? make a video about that sir for clarifications of all haha. thank you very much.
Hello, what should I do if the dwgs that I linked from CAD to Revit, arrive as broken or crooked? I mean, the lines in CAD that have 0,90,180, and 270 degree angles are supposed to be straight lines, right? Also, every corner and curve that are supposed to be meeting have ended up not meeting in Revit. I hope there's a way to solve this. Thank you!
@@RevitHows Hello, I've ended up solving it. Turns out, precision in AutoCAD is the key. I adjusted the decimal points to 4 zeroes, then I saw that all angles are near straight---more or less discrepancies.
thank you so much but when i want to import my cad link into revit I get this massge from revit the geometry in imported file has externs greater than 20 mike (33km) what i have to do ??
Yes it is possible, and that is most often the workflow in Revit, regardless of the discipline. It's ok to be newbie, everyone starts to be a newbie before they became a master. 😁🙏
@@RevitHows yes sir if i do zoom to fit i can see the inserted file but it is too far from the default lovation where it ahould be. How can i bring it back? Or what should i do so that when i insert. It will be on the proper location? Thanks ill check your videos in a little while. More power to you. God bless
ua-cam.com/video/HiWWtzIS0NA/v-deo.html Check this video sir, maybe this will answer your question, if not, feel free to message me on my facebook account @Revit How's, will be more than happy to assist you.
@@RevitHows Sir I watched your video and tried everything in there still it did not insert properly. I feel I am in the dead end of my study. I watch a lot of videos already pero wala talaga. Is it ok If I send you my simple plan. Its not complex one because I am just trying to learn revit now but I've been using Auto cad for many years already. Can you help me. I'll email it to you if its ok. Thanks
Hi, Thank you for the video. Do you know why my auto cad file don't show on revit ? I have been trying to find out the issu but can't find where the error is. If you have any suggestion ... Thank you very much ! Betty
Hi betty, usually Cad file won't appear because of various reasons, like origin up to the file corruption. You can check out my latest video about Link Cad error, hopefully ot will help you. If not you can message me on my facebook account Revit Hows. Thank you!
@@RevitHows Hi Marc, Thank you for your reply and so quickly. I think I already checked this video. I will try on the facebook accound then. I love your videos Thank you Betty
Hello, If cad file is in mm you should specify in mm as well when inserting in revit. Mostly, errors is due to unitless cad or cad files that are in inches.
@@RevitHows please specify your mail I'd I will send that cad, as I tried these all even purge the drawing, changed from LT version to normal cad, changed to meters both revit and cad, every thing done. One file was ok when I changed to normal cad.
Ok sure email to me.. markitek@gmail.com You can follow me as well on Facebook to have easy communication of any trouble that i may be of any help. Cheers man 😁
Hello! I always save as my cad for linking, then establish the origin of cad 0,0 same to where my project base point. So when I insert my cad file to my revit file using PBP to PBP or Origin to origin it will match exactly. You can follow and message on my FB Revit Hows page for any querries and assistance you may need. Salamat!
So sorry, didn't saw your comment until now, usually the cause is the origin of your cad file is different from the revit project base point, you have to match where the location of your project base point in revit! For quicker response please follow Revit Hows on FB. Thanks!
hello sir marki, I want to ask a question regarding the problem I'm encountering while inserting cad file into revit2017, the problem is the proxy graphics of cad file I'm inserting and I can not continue working on revit. i already set proxygraphic into 0 and other proxy options into 0 but still did not solve my problem. is there any other way to solve this?
Hello, do you mind if you can forward to me the cad file so i can investigate further? Sorry for the late response.. I wanted to try something if it'll work.
hi sir, thanks for the reply. with regards to proxy graphics dilemma, I solved it already by saving the cad file into a lower version i.e. Auto Cad 2010.
Oh nice Actually I do work there currently and I know her Sir. Haha what a small world. Dmci now is utilizing revit software more than ever..your videos really help a lot. thank you. More power to you sir!
❤❤❤❤thanks for 4 hours I could not find sokution for this problem
Thanks a billion
Thank you Marky! Sobrang HELPFUL 1milliontimes ng channel mo! Nabitin ako sa part 02! Please add more to this series so we can complete practicing this house. :) #newbie
Wow... Salamats KJ!
Hey bro..suresh from dubai..hwo r u ...
THANKS A LOT, IWAS SUFFERING...REALLY HELPFUL
3d view not shown plz solve this issue guide plz?
thanks for the tutorial sir, btw do you have a video on how to align the cad and revit base points? make a video about that sir for clarifications of all haha. thank you very much.
Wow! Thank you for the commendation! I will create one for you about the origin alignment!
Hello, what should I do if the dwgs that I linked from CAD to Revit, arrive as broken or crooked?
I mean, the lines in CAD that have 0,90,180, and 270 degree angles are supposed to be straight lines, right? Also, every corner and curve that are supposed to be meeting have ended up not meeting in Revit.
I hope there's a way to solve this. Thank you!
Hi there! You can send me the cad files for me to check the possible Issue, here's my email address markitek@gmail.com
@@RevitHows Hello, I've ended up solving it. Turns out, precision in AutoCAD is the key. I adjusted the decimal points to 4 zeroes, then I saw that all angles are near straight---more or less discrepancies.
Thanks for sharing! 😁🙏
thank you so much but when i want to import my cad link into revit I get this massge from revit the geometry in imported file has externs greater than 20 mike (33km) what i have to do ??
Hello.. I have other video about Link Cad Error that I've solved... You can try to take a look at that..😁🙏
ua-cam.com/video/HiWWtzIS0NA/v-deo.html
hi sir marki, it is possible to create hvac or ,plumbing plan using cad plan into revit
Hi there! Yes.. It is more than possible! 😁🙏
sir @@RevitHows even thought 2d cad plan only????
Hi.. Sorry I don't understand your question. Can please elaborate more? 😊🙏
sorry sir hehe , ang magiging reference ko sir 2d cad plan na iinsert sa revit to create plumbing plan. possible ba yun, newbie lang po sa revit
Yes it is possible, and that is most often the workflow in Revit, regardless of the discipline. It's ok to be newbie, everyone starts to be a newbie before they became a master.
😁🙏
Good job..!! Thanks again for sharing your knowledge...
I followed everything but why I cant see my autocad file on revit? Please help.
Hello sir, perhaps your autocad is too far from its 0,0,0 origin, please check my latest video about Link Cad error. How to setup a Link cad file
@@RevitHows yes sir if i do zoom to fit i can see the inserted file but it is too far from the default lovation where it ahould be. How can i bring it back? Or what should i do so that when i insert. It will be on the proper location? Thanks ill check your videos in a little while. More power to you. God bless
ua-cam.com/video/HiWWtzIS0NA/v-deo.html
Check this video sir, maybe this will answer your question, if not, feel free to message me on my facebook account @Revit How's, will be more than happy to assist you.
@@RevitHows Sir I watched your video and tried everything in there still it did not insert properly. I feel I am in the dead end of my study. I watch a lot of videos already pero wala talaga. Is it ok If I send you my simple plan. Its not complex one because I am just trying to learn revit now but I've been using Auto cad for many years already. Can you help me. I'll email it to you if its ok. Thanks
Sure you can email to me and I'll take a look.. markitek@gmail.com. Message me on facebook po. Will be much faster.
Hi, Thank you for the video.
Do you know why my auto cad file don't show on revit ? I have been trying to find out the issu but can't find where the error is.
If you have any suggestion ... Thank you very much !
Betty
Hi betty, usually Cad file won't appear because of various reasons, like origin up to the file corruption. You can check out my latest video about Link Cad error, hopefully ot will help you. If not you can message me on my facebook account Revit Hows. Thank you!
@@RevitHows Hi Marc, Thank you for your reply and so quickly. I think I already checked this video. I will try on the facebook accound then.
I love your videos
Thank you
Betty
no one explaining what should be the units of the CAD file & revit i am facing error
Hello, If cad file is in mm you should specify in mm as well when inserting in revit. Mostly, errors is due to unitless cad or cad files that are in inches.
@@RevitHows please specify your mail I'd I will send that cad, as I tried these all even purge the drawing, changed from LT version to normal cad, changed to meters both revit and cad, every thing done. One file was ok when I changed to normal cad.
Ok sure email to me.. markitek@gmail.com
You can follow me as well on Facebook to have easy communication of any trouble that i may be of any help. Cheers man 😁
@@RevitHows thanks sir tommorow morning 10am uae time I will sent those file
@@RevitHows please check your mail I sent mail.
Thanks
You're welcome
my revit not showing still not showing file
I'm Sorry, I don't understand the question, can you explain further?
Thank you
You're welcome!
@@RevitHows how to set up your cad file align with Revit arch model when linking both together using mechanical template? Salamat
Hello! I always save as my cad for linking, then establish the origin of cad 0,0 same to where my project base point. So when I insert my cad file to my revit file using PBP to PBP or Origin to origin it will match exactly. You can follow and message on my FB Revit Hows page for any querries and assistance you may need. Salamat!
hello, Origin to Origin not lining up when I link cad, I need your help
So sorry, didn't saw your comment until now, usually the cause is the origin of your cad file is different from the revit project base point, you have to match where the location of your project base point in revit!
For quicker response please follow Revit Hows on FB. Thanks!
hello sir marki, I want to ask a question regarding the problem I'm encountering while inserting cad file into revit2017, the problem is the proxy graphics of cad file I'm inserting and I can not continue working on revit. i already set proxygraphic into 0 and other proxy options into 0 but still did not solve my problem. is there any other way to solve this?
Hello, do you mind if you can forward to me the cad file so i can investigate further? Sorry for the late response.. I wanted to try something if it'll work.
You can also message me on Facebook look for Revit Hows
hi sir, thanks for the reply. with regards to proxy graphics dilemma, I solved it already by saving the cad file into a lower version i.e. Auto Cad 2010.
Glad it is solved! Please follow me on Facebook and message me directly there, it is easier and faster.. Hope I can be of any help.
Hi! may I just ask how are you related to Ma'am Alpha? Seems familiar? she might be my colleague? Just curious btw. thanks and more power!
Hello! We're previously colleagues at DMCI homes... Thank you for the support! 😁🙏
Oh nice Actually I do work there currently and I know her Sir. Haha what a small world. Dmci now is utilizing revit software more than ever..your videos really help a lot. thank you. More power to you sir!
Nice! Please follow me on facebook, and feel free to ask anything about revit! I am very happy to assist...
😁🙏 Shoutout to DMCI homes architects!
Sir gawa ka naman po tutorials ng MEP in tagalog po salamat po sa tuts nyo po
Are you a Filipino?
Yes po
@@RevitHows Sir request po ako. Yung mga common mistakes na hindi dapat gawin in revit modeling.
More power. Thank you
I can tell your pinoy from ur accent😀
Haha yes I am... 😊🙏