Hello, I hope to remove my dpf on my e90 soon as it is also blocking up. Your video is the best one I have seen on youtube! You have explained everything very slowly and it is very clear. Thank you for making this video.
Thank you friend - this was incredibly helpful. I cleaned the DFP on my E87 1 series 123d using your guide - it was much tighter in the engine bay but all the same process. Very much appreciated!
About to start on my x3 and was looking for some video details on the dpf extraction, Thanks for the detailed camerawork. A couple of points.. Mr muscle will remove the soot build up but you need also brick patio cleaner at a 4:1 dilution to loosen and get rid of the ash buildup. Rinse with low pressure not high pressure water or you will damage the internals for sure,. Finally and most importantly, you need to reset the dpf using software tool like bimmertool to let the system know you have a new dpf. It resets the adaptations and also the countdown mileage back to140000 miles. If you don't you will get a car will stop reminder as it approaches 140000 miles.
Excellent video, I have a 2011 320d and cleaning the DPF is my next job so I am very pleased to find you have put these instructions up. You have already helped me clean my EGR valve and my intake manifold, so I am feeling much more confident about tackling the DPF now. I'm thinking I'll probably replace both the sensors and the vacuum tube while I'm at it. Thank you.
theres a gasket betwen the turbo and the dpf, i know it doesn't show on real oem the drawing, but you have the part number just below the clamp, that clamp should be tighgtened first to ensure theres no exaust leaks betwen the turbo and the dpf ( it happened to me), then you can tighten all the bolts on the dpf. peace
Thanks for the video, all the idiots on the forums were telling me to take my e90 to a garage or get it mapped out which I can't justify spending money on a car I paid nothing for and has 200k miles
If you do an aftermarket downpipe you should get it mapped to avoid overspinning the turbo due to more exhaust flow. Turbo spinning faster= more air. More air + original fuel map could hurt the engine
My n47 DPF on my E84 X1 XDrive is blocked up.. but I cant find any videos with an XDrive car to take it off. Because its 4WD there’s bracing and stuff in the way. I think I need to drop the subframe to take the DPF off
Hi mate super job I have a e93 i hope the configuration is the same as yours. Some people say removing the dpf from the e93 is difficult because you need to remove the engine support to have the room to slide the dpf down and out What do you thinkk Thankyou
I’m about to try this my dpf isn’t to bad or get catless downpipes but just a message to all people driving diesel n47s if you have dpf blockage reoccurring change your crankcase breather hose aswell as pcv valve cover and don’t drive your car like a grandma these cars like a bit of throttle because turbo needs to spin up so don’t be scared to drive you car a bit heavy throttle it’s good for these n47 diesels
Hello mr khan what a brilliant video. Its what ive been looking for for a while now and explained everything so clear so thank you for that. I just wanted to. I think i have a dpf blockage. Because my temperature light comes popping up and the car just loses power. A while before that the engine light would come on and the car would not go over 30mph. So id restart the car and itd be fine. But now, i drive the car no more than an hour and the temperature light comes on. Is this due to the dpf being clocked up. Thank you
I just got a new one with the brackets including front circular bracket... There appears to be one bolt welded to the dpf like on your video... Are the rest of the bolts fixed to the vehicle..because because I didn't receive any with the dpf and brackets?
Hello, I hope to remove my dpf on my e90 soon as it is also blocking up. Your video is the best one I have seen on youtube! You have explained everything very slowly and it is very clear. Thank you for making this video.
Thanks 😊. Please do watch like and subscribe my channel. Kind regards.
Yes subscribed now
Thank you friend - this was incredibly helpful. I cleaned the DFP on my E87 1 series 123d using your guide - it was much tighter in the engine bay but all the same process. Very much appreciated!
You are welcome thanks 😊
Nice, just what I was looking for! Good explanation and visualization step by step!
Thanks 😊
About to start on my x3 and was looking for some video details on the dpf extraction, Thanks for the detailed camerawork. A couple of points.. Mr muscle will remove the soot build up but you need also brick patio cleaner at a 4:1 dilution to loosen and get rid of the ash buildup. Rinse with low pressure not high pressure water or you will damage the internals for sure,. Finally and most importantly, you need to reset the dpf using software tool like bimmertool to let the system know you have a new dpf. It resets the adaptations and also the countdown mileage back to140000 miles. If you don't you will get a car will stop reminder as it approaches 140000 miles.
Excellent video, I have a 2011 320d and cleaning the DPF is my next job so I am very pleased to find you have put these instructions up. You have already helped me clean my EGR valve and my intake manifold, so I am feeling much more confident about tackling the DPF now. I'm thinking I'll probably replace both the sensors and the vacuum tube while I'm at it. Thank you.
Good luck n thanks for your appreciation
Job went well, followed your instructions on my e93, and now, 4 months later I’m still loving it.
Good to hear your successful story.
Thank you Khan Saab.
Jazak Allah o khair for sharing this very useful video with us.
You are welcome 😊
theres a gasket betwen the turbo and the dpf, i know it doesn't show on real oem the drawing, but you have the part number just below the clamp, that clamp should be tighgtened first to ensure theres no exaust leaks betwen the turbo and the dpf ( it happened to me), then you can tighten all the bolts on the dpf. peace
What symptoms did you have when this happened please? I think my seal may be gone.
Thanks for the video, all the idiots on the forums were telling me to take my e90 to a garage or get it mapped out which I can't justify spending money on a car I paid nothing for and has 200k miles
@@thetbird69 you are welcome 😊
If you do an aftermarket downpipe you should get it mapped to avoid overspinning the turbo due to more exhaust flow.
Turbo spinning faster= more air. More air + original fuel map could hurt the engine
Cheers fella, This is just what i needed, Got to change the flexi on my dpf this wkend, Thanks again Great video
@@oldskoolfantasy You are welcome thanks
Very good video! Should you rinse the DPF with clear water before assembling it, as the Mr Muscle may harm Catalytic converter?
Very good video By far the best one I have seen. Thank you
You are welcome thanks 😊
Very good video only question I have is was there a reason you didn’t use fire paste in the exhaust joint before fitting together?
Didn't need to. It worked out without.
Nice video mate can i suggest something used on few occasions wyanns off car dpf fluid clean goods result also
My n47 DPF on my E84 X1 XDrive is blocked up.. but I cant find any videos with an XDrive car to take it off. Because its 4WD there’s bracing and stuff in the way. I think I need to drop the subframe to take the DPF off
Hi mate super job
I have a e93 i hope the configuration is the same as yours. Some people say removing the dpf from the e93 is difficult because you need to remove the engine support to have the room to slide the dpf down and out
What do you thinkk
Thankyou
Hi. I didn't have to remove the engine support. Just follow my video n u will be successful.
I’m about to try this my dpf isn’t to bad or get catless downpipes but just a message to all people driving diesel n47s if you have dpf blockage reoccurring change your crankcase breather hose aswell as pcv valve cover and don’t drive your car like a grandma these cars like a bit of throttle because turbo needs to spin up so don’t be scared to drive you car a bit heavy throttle it’s good for these n47 diesels
Hello mr khan what a brilliant video. Its what ive been looking for for a while now and explained everything so clear so thank you for that. I just wanted to. I think i have a dpf blockage. Because my temperature light comes popping up and the car just loses power. A while before that the engine light would come on and the car would not go over 30mph. So id restart the car and itd be fine. But now, i drive the car no more than an hour and the temperature light comes on. Is this due to the dpf being clocked up. Thank you
@@jaylee5061 Hi. Thanks for your appreciation. Yes it might be because of the blockage. Good luck with your job. Thanks
@@diykhan cheers khan I appreciate that.
Merci pour votre vidéo. Travail bien expliqué et propre. Merci encore une fois. Bonne continuation.
You are welcome thanks 😊
Excellent camera work. Many hanks.
You are welcome thanks 😊
How long was the extension needed to reach the bolt right up from under the car?
About 12 inches
Is the cat built onto the dpf
Excellent guide
Has it worked long term? Is it still clear?
Yes it did work well.
I just got a new one with the brackets including front circular bracket... There appears to be one bolt welded to the dpf like on your video... Are the rest of the bolts fixed to the vehicle..because because I didn't receive any with the dpf and brackets?
Yes you are right. Just use the one already on the car. Good luck 👍
@@diykhan Its a genuine reconditioned in full working order with new flexi attached... Roughy.. how long would you say to remove old and fit new?
@@pauljohnson3686 about an hour and half.
@@diykhan Ok that's great thanks.. Have a happy new year.
@@pauljohnson3686 happy new year n good luck with the job. Hope u sort the car out.
My sign comes up every time I go over 3000 revs the dpf sign comes up is there anyway I can clean it without taking it out. Many thanks
What a great video
Thank you
Odlicno👍
When reinstalling the Dpf I can seem to get it to fit into place anyone where that tricky bolt is anyone else has same issue ?
Thank you boss
Will this also work with the 2007 e92 320d ?
Yes it will. Good luck.
How long you let mr muscle leave in the system?
One hour
@@diykhan thank you 👍
❤❤❤❤❤❤❤
Thanks
Product?
Which one
If you put a wet dpf on car. That's a big shiit
I did wait 2 days for it to dry then I fitted its back in also made sure it was bone dry.
I just took it out from my 318d e90 2009. It’s like an appendix in a human body. Completely useless.
Thank you . great video