Samsung Galaxy Tab A8 SM-X200 Disassembly Screen Charge Port USB C Replacement Repair Quick Look
Вставка
- Опубліковано 16 жов 2024
- Disassembly Repair Fix Tutorial Teardown Guide
If you appreciate my videos, please consider helping me continue to make them by sending me a little appreciation, even $1 would be greatly appreciated. Thanks! :)
Venmo:
"@BinhVu" Last 4 Digits if it Asks Are 6734
Zelle or PayPal (friends and family from a bank account so they don't charge any fees):
itsbinhrepaired@gmail.com
Patreon:
/ binhrepaired
Feel free to mail me your old electronics or parts you replaced during an upgrade.
Mail:
It's Binh Repaired
1288 N Hillview Dr.
Milpitas, CA 95035
Tesla referral link: www.tesla.com/...
Nice job, man! Thanks for the upload
Thanks!
Use some heat too, this will soften the adhesive more, and that iso will go through it much easier.
super useful (as I consider whether to open my own, with it's "bad" 3.5mm jack port (black glue around it in the frame and POSSIBLY bent contacts inside, just can't use any standard 3.5mm jacks). Can you post that link for the J series screwdrivers you mention? thanks so much.
This set amzn.to/3rTAROJ
Grate video mate. Unfortunately you show exacly reason why I quit electronics repair industry. They trying to make opening that devices as hard as it only possible. I was always says to customers: if you want to have devices possible to repair go for Samsung, but now I see Samsung going same path as Apple or Huawei... I'm not say its impossible but spend 2 hours to replace charging port and earn on that only 50 euro is wasting time...
Yeah...
next time try a .50 guitar pick for lifting the screen. it's much safer. metal can scratch the paint on the back of the edge of the screen. been using picks for about 8 years now and they are amazing.
Nice
Better than guitar pick is using some heat and screen protector film. This way, the film buckles rather than potentially cracking the glass.
Heat will soften the glue and the iso will help alot more then.
So i dropped my tablet with the charger plugged in. i replaced the charge port. i plug in the cord and i hear it beep like its charging but the screen does not work now. Any thoughts or advise?
@@hamn666 might be you didn't connect the screen ridght or damaged it or the cable
Hello, do you mind give me some advice. I replaced the screen for my tablet. I checked if worked fine by connecting the flex connector to the new screen, I worked fine. When I glued the screen on the tablet and turned it on it didn't worked. It does turn on I can hear the sound of the notifications and when I plug in the charger. Do you have any idea what could have gone wrong. Any advice will be greatly appreciated.
Might have gotten yanked out
@@ItsBinhRepaired Thank you so much, I replaced the cord and worked fine
@@bridgetbenitez8153 awesome, glad it worked!
i just replaced the usb c port on my tablet (same model) but now the screen doesn't turn on. do i require a new screen now?
@@night0eagle9 if you didn't turn it off and disconnect the battery first, you likely fried the connection or backlight circuit
Very good man
Thanks