Golden Eagle Hi Capa 3340 Unboxing and Strip Down Airsoft Pistol
Вставка
- Опубліковано 17 вер 2024
- Thanks for checking in, in this unboxing we look at a Golden Eagle Hi Capa, the 3340 variant to be exact, a value end pistol which is a good clone of a TM.
You can buy the pistol as I did from Bespoke Airsoft here;
www.bespokeair...
Hi mate from Australia. Be good if U do a parts list Lfhough we don't have Airsoft we now have gel ball . And golden eagle now makes posts for gel balls . Be good to see a video with a parts list so I can upgrade mine the only exception would be the inner barrel as our sizing is 7,5mm. Thank U for the video
As cheeky as this is....drop me a sub. I've already done a "tear down" video and I have an upgraded parts list video scheduled for 2 days.
Do I have to take off the orange tip to attach a tracer
Highly likely - mine didn’t come with orange tip but usually they are glued in to the threaded barrel. Very hot water is the best way of getting them off (obviously strip it down so it’s outer barrel only).
@@AngryBullAirsoft okay 👍
how do you remove the rear sight?!?!?! i destroyed the top screw on the bbw and ordered a new one for it but it doesnt fit becuase of the sight. any clue of how to get rid???
Rear sight should be a case of removing BBU screw, drop BBU out of slide, loosen top screw on sight (height adjustment) so it clears the slide and a gentle tap from the mag release side as it's a tight fit.
You'll struggle changing just the sight though, the stock sight has a raised bar that holds the nozzle spring down, normally slides have this but not on the GE (see my other videos where I detail this).
Do they sell extended mags?
Yes you can get extended mags from WE and TM - WE being the "better" option as it uses standard 5.1 mag parts where the TM extended uses bespoke parts.
I m starting airsoft and and bought this pistol if I was to buy a new outer barrel would it stop the rattle or not
If you have chance, don't buy it. I've got a video due out shortly listing the parts I've had to buy to get it "right". It easily surpasses a stock TM Hi Capa for cost. New outer barrel, slide (as stock is so heavy) rear sight, bbu, pretty much entire top half rebuild and it's cost in total double the cost again! Fun project though if you have the £££ to throw at it.
I have £250 as a budget to customise the parts
Drop me a sub, I have a video coming out in a couple of days that details all of the upgrade parts I've used. I still think you'd be better spending a bit more and getting a TM base gun though.
Okay so hanks for the help and nice video
If you get bored, have a look at my strip down and first attempt at part swapping here ua-cam.com/video/J4aLfyI0nk0/v-deo.html this isn't my "final upgraded" video though so keep an eye out for that, has a real kicker when it comes to getting a TM slide onto it.
Update on my hicapa I hpaed it and it is awesome
It is the way! Apart from 1 specific site I intend on going to, HPA>Gas every time.
Could these slides take a 1911 bushing without modification? Found some for sale cheaper than guarder and I'm thinking of using it as a base for a custom 1911 build
It should do. 1911 and 2011 uppers are interchangeable normally but the GE stuff is slightly slack on tolerance.
@@AngryBullAirsoft I'm sorry i mean the barrel bushing. It's a component used by the 1911 but not hi capa to keep the thinner 1911 barrel in place (the oem marui slides will need modification to fit the thinner 1911 barrel and bushing)
I'm not sure then I'm afraid as I've never owned or pulled apart a 1911.
@@AngryBullAirsoft ah in that case do you recall there being a groove or notch cut into the inside of the slide within the first inch from the front on the left side (looking from the front)
Is their any fully auto on that gun
Not on this one. You can get WE models that are switchable and TM did the Extreme45 that had full auto. You can also get a disconnector from LACC that will make a capa go full auto.
MY GOLDEN EAAGLE HI CAPPA 3303 TAN , WORKS BETTER AS AN AIRSOFT THAN A GEL BLASTER , I JST HAD TO MAKE SLIGHT MOD TO THE MAG LIP, AUSTRALIA MATE , OUR GOV ARE BUNCH OF TIGHT ASSES SO WE ONLY GET GEL BLASTER N THEY ARE GETTING BANNED SOON , I WAS LUCKY HAHAHA
They're banning blasters?? 😢
@@AngryBullAirsoft UNFORTUNATELY YES THEY ARE IN PROCESS OF BANNING GEL BLASTERS , IM JST HAPPY MY MATES N I BOUGHT A BUNCH BEFORE THEY R BANNED, MAJOR BUMMER , GOTTA MOVE TO SOMEWHERE LIKE TEXAS :)
@@3new_tires I'm sorry to hear that dude. Fingers crossed for a lady minute turn around for you.
@@3new_tires not in Queensland they’re not.
Don't like the gold.. better is Silver or black..
Agreed, the gold didn't seem to sit well. Please have a look on my channel as this has evolved completely and is currently sporting an all black / blackout look and I'm yet to upload the latest iteration of it using an AAP inner barrel. Makes a perfect 340fps (0.2 equivalent) on 80psi!
You are just a nit picker
It is actually a grate pistol
For £100 it's ok if you don't have exposure to anything better. I have had to spend about the same again to make it perform as well as a TM which costs only 30% more.