how to move an object to a given distance with the arrow keys on the keyboard For example, what about drawing a line that wants to move that line apart from the line at 10 mm? in aspire
SUBTITLE in ANY Language . Russian also :-) Just go to Settings in the Screen then Subtitle then Auto translate - choose Russian . Thats possble with all NEW UA-cam Videos . Greetings from Austria
I am a total beginner. It does not explain what a vector is or what the objective of the tutorial is at the beginning such as 'this is what we are trying to draw eg a mobile phone holder'
Hey There Jeremy! This particular tutorial talks through the specifics of how to draw in the software - it may be useful for you to watch the getting started videos to begin with. Here is a link to the Getting Started Playlist: ua-cam.com/video/6fqg8QCrdKQ/v-deo.html or you can watch them from our tutorial browser which you can find here: support.vectric.com/tutorials/V9/?software=2&category=2&order=1 I hope this helps! :)
hi Love I learn a lot from your teaching just one think more I need you to help me, My CNC doesn't lift high enough and cuts into the material, could you tell me what I must to do? I use Aspire and mach3 ,I will be happy if you or someone help me.
Hi, good video thanks , need to asked you how can I do a shower base 48'' x 60'' with a center drain in the middle but need to have a drop for water , can't find how to do a 1/8 drop every foot ...to to center drain. any help will be good. thanks again. Erik
Hey Erik, Thanks for your kind comments, for project queries and technical support could you please email our support team who should be able to point you in the right direction 👍 www.vectric.com/support Thanks!
Hey Triumf, Welcome to the world of CNC :) Aspire enables you to design parts/projects in the software as well as calculate the code to run on your machine you will need CNC Control software (e.g. Mach 3) to load the toolpaths on (from Vectric software) to transfer to your CNC machine. I hope this helps :)
@@vectric Ok i got it, by the way so how do i save the job, as g code? Or stl, in order to send to the controler, or in other words whats the difference between g code and stl file ?
@@triumfdula8830 Hey Triumf, You need to save your toolpaths out to the post processor that your machine uses, so if you had Mach 3 control software you would save it to a Mach 3 Post. An STL file is exporting a 3D model out to use in other programmes. For more information take a look at our New to CNC page, here we have a short video, a downloadable PDF document outlining the process and other useful information. I hope this helps :)
@@longliu2901 ohh ok, i just got the software and getting my cnc soon. So I was curious how fast were you able to learn and create your first 2.5d or 3d project lol
You can use Mach 3 as your Post Processor to cut the toolpaths created in Aspire to run on your Mach 3 CNC. If you are talking about 3D Printing models that are created in Aspire, you have the option to export the model out as an STL to achieve this. I hope this helps.
Hi There, thank you for your message. We offer a free trial of our software, available for download here: www.vectric.com/free-trial. You can test everything but will need to purchase Cut2D Desktop if you would like to toolpath your own designs. I'm afraid we don't have any free alternatives which will allow you to create your own designs and toolpath them. I hope this helps. Thanks
@@abcde7515 Neither our FREE trial or our purchased software are time limited so once you have purchased it is yours to use for as long as you wish to use it. If you have any further questions you can contact our sales team directly on sales@vectric.com. Thanks
Beautiful tutorial! I can’t believe how much I just learned. Thank you!
Thanks!
how to move an object to a given distance with the arrow keys on the keyboard
For example, what about drawing a line that wants to move that line apart from the line at 10 mm? in aspire
SUBTITLE in ANY Language . Russian also :-)
Just go to Settings in the Screen then Subtitle then Auto translate - choose Russian . Thats possble with all NEW UA-cam Videos .
Greetings from Austria
Just did that and it doesn’t show up lol
I am a total beginner. It does not explain what a vector is or what the objective of the tutorial is at the beginning such as 'this is what we are trying to draw eg a mobile phone holder'
Hey There Jeremy! This particular tutorial talks through the specifics of how to draw in the software - it may be useful for you to watch the getting started videos to begin with. Here is a link to the Getting Started Playlist: ua-cam.com/video/6fqg8QCrdKQ/v-deo.html or you can watch them from our tutorial browser which you can find here: support.vectric.com/tutorials/V9/?software=2&category=2&order=1 I hope this helps! :)
hi Love I learn a lot from your teaching just one think more I need you to help me, My CNC doesn't lift high enough and cuts into the material, could you tell me what I must to do? I use Aspire and mach3 ,I will be happy if you or someone help me.
Hello... This sounds like a question for support@vectric.com where they can have a closer look at your situation.
Hi, good video thanks , need to asked you how can I do a shower base 48'' x 60'' with a center drain in the middle but need to have a drop for water , can't find how to do a 1/8 drop every foot ...to to center drain. any help will be good. thanks again. Erik
Hey Erik, Thanks for your kind comments, for project queries and technical support could you please email our support team who should be able to point you in the right direction 👍 www.vectric.com/support Thanks!
Hello, i'm new to cnc, just wanted to ask do i need to purchase mach3 to operate the cnc or vectric aspire does it all ?
Hey Triumf, Welcome to the world of CNC :) Aspire enables you to design parts/projects in the software as well as calculate the code to run on your machine you will need CNC Control software (e.g. Mach 3) to load the toolpaths on (from Vectric software) to transfer to your CNC machine. I hope this helps :)
@@vectric Ok i got it, by the way so how do i save the job, as g code? Or stl, in order to send to the controler, or in other words whats the difference between g code and stl file ?
@@triumfdula8830 Hey Triumf, You need to save your toolpaths out to the post processor that your machine uses, so if you had Mach 3 control software you would save it to a Mach 3 Post. An STL file is exporting a 3D model out to use in other programmes. For more information take a look at our New to CNC page, here we have a short video, a downloadable PDF document outlining the process and other useful information. I hope this helps :)
@@vectric Thank a lot, everything is clear i just read some articles from cnccookbook and scan2cad, now its everything clear
@@triumfdula8830 Glad to hear :) CNCCookBook is a great resource for all things CNC.
Fine lecture.
your great struggle is fruirful for me. Thank you.
Abid saleem Lahore Pakistan
whatsapp: 03217421405
Many thanks!
I decided to watch all of these videos
how long did it take you to watch all the video plus how fast did it take you?
xdjnoclux I have not watched all of it. But most them really helped.
@@longliu2901 ohh ok, i just got the software and getting my cnc soon. So I was curious how fast were you able to learn and create your first 2.5d or 3d project lol
xdjnoclux I guess that you just purchased a shapeoko or xcarve CNC? I am just a few months ahead from you. I bought a shapeoko XXL half year ago.
@@longliu2901 lol yea i got the xxl... 😅 have you gotten any projects done?
make a Russian subtitles please, i russian and i am understand but this difficulty, brain is burn.
CAN I USED MY MACH3 CNC MACHINE TO PRINT ASPIRE 3D MODELS THANK YOU
You can use Mach 3 as your Post Processor to cut the toolpaths created in Aspire to run on your Mach 3 CNC. If you are talking about 3D Printing models that are created in Aspire, you have the option to export the model out as an STL to achieve this. I hope this helps.
This application is very expensive in my country, can you suggest me a free alternative application?
Hi There, thank you for your message. We offer a free trial of our software, available for download here: www.vectric.com/free-trial. You can test everything but will need to purchase Cut2D Desktop if you would like to toolpath your own designs. I'm afraid we don't have any free alternatives which will allow you to create your own designs and toolpath them. I hope this helps. Thanks
@@vectric Thanks for your comment. How long can i use it
@@abcde7515 Neither our FREE trial or our purchased software are time limited so once you have purchased it is yours to use for as long as you wish to use it. If you have any further questions you can contact our sales team directly on sales@vectric.com. Thanks
@@vectric thanks
That price is completely ignorant
i am beyond disappointed with your tutorials you ramble on about anything but drawing simply draw something and show measurements
Then go to someone else's tutorial.