Hi there. 'Don't know where the links are, I'm afraid but if you mean the "solid" metal ones, just look on Ebay or Amazon and you should find them easily enough.
Dear Sir i bought the Ek Addder and i ordered some broughtheads razorsharp the ones you show in your video,i screwed them on the original arrows the blue ones, only to find out that they dont fit into de magazine of the adder,and they also dont line up with the vanes so ill have to modify to,what glue did you use for the arrow tips??
Hi there. You'll have to take the "corners" off of the broadheads to make them fit the magazine. - I don't have this problem as I don't have a magazine on mine ( I've got the r9, not the adder). As far as the adhesive goes, any high strength impact adhesive should work. 'Hope this helps. 🙂
@@jonwoodhousea.k.a.pistolcr3943 Thanks for the reply i got a fun job to do,12 razorsharp broughtheads and another 24 very pointy broughtheads,so i need to shorten and modify 36 arrows,but hey its worth it,love my new adder crossbow,but the original arrows are to expensive,so we make them ourselves.............Love your vids man subscribed and Greetz from Amsterdam.........
i was just looking at videos to try and find the diameter of these cobra r9 bolts , i've not shot my pistol crossbow in a few years , but i dug out the old bolts i made and had a few shots with it today , bolts for pistol crossbows are shite , but as i used to make my own archery arrows when i shot competetively , i made some , i also made some with nail points which were great for timber shooting , i'm about to make some more , but i was curious how thick these shafts are compared to the crap abs ones ..... my mybo target is also crap for pistol bolts ,so that's something else i'll need to make
@@jonwoodhousea.k.a.pistolcr3943 yeah they look the best of a bad bunch for sure , the ones i made are 7.5 inch but i think the pistol bows would be more accurate with 9 or 10 inch , so that's what i will make next , and the beauty of a longer bolt, also means you don't end up losing it inside a target like mine , although my target is not really meant for crossbows ... but a 6 inch power stroke don't mean it should be a 6 inch bolt , but thats what they seem to do for the pistols , carbon is lighter so it's dont hurt to go longer, i did wonder why you use glue for your points , if you damage a shaft, keeping the point becomes tougher , i only use the arrow building melts , they look beasty though , even though in the UK there is no real advantage to use them as the razor types break easily into anything other than soft flesh , i made some quality target ones , and the best ones i did that could be used on most surfaces, was a friggin nail point lol , go figure
@@jonwoodhousea.k.a.pistolcr3943 shared your vid about shoulder stocks in one of my videos descriptions where I show my makeshift stock made from a paint roller
Great work on those Bolts, really nice work mate
Thanks!
Awesome crossbow and bolts bro!
Thanks! 😷
@@jonwoodhousea.k.a.pistolcr3943 welcome bro
Need to know how to set up some bolts for fishing I been trying to set them up. How to do it
For the adder crossbow with the 5 bolt clip
As I have the cobra r9 and not the adder, I'm afraid I can't help. Sorry! ☹️
Thanks for the video.
Can you please provide links to the exact source of your arrowheads, shafts, inserts, nocks etc. ?
I just got them from ebay and amazon. Sorry I can't be more specific 😒😒
Hi! Great video! Do the R9 bolts fit the red back? Thank you
Hi. They are too fat, I'm afraid, at 7.6mm diameter. Typically, horizone redback and Armex Tomcat 2 bolts are 6mm diameter.
yes they do see my post
@@lindso6105 hi Lindso. Thank you, but could you point me towards your post as I can’t find it!
@@davidmitchell8357 ua-cam.com/video/xdn2g4DJQXg/v-deo.html
Can you post the links to the bolts and the first broad heads you showed mate?
Hi there. 'Don't know where the links are, I'm afraid but if you mean the "solid" metal ones, just look on Ebay or Amazon and you should find them easily enough.
Dear Sir i bought the Ek Addder and i ordered some broughtheads razorsharp the ones you show in your video,i screwed them on the original arrows the blue ones, only to find out that they dont fit into de magazine of the adder,and they also dont line up with the vanes so ill have to modify to,what glue did you use for the arrow tips??
Hi there. You'll have to take the "corners" off of the broadheads to make them fit the magazine. - I don't have this problem as I don't have a magazine on mine ( I've got the r9, not the adder). As far as the adhesive goes, any high strength impact adhesive should work. 'Hope this helps. 🙂
@@jonwoodhousea.k.a.pistolcr3943 Thanks for the reply i got a fun job to do,12 razorsharp broughtheads and another 24 very pointy broughtheads,so i need to shorten and modify 36 arrows,but hey its worth it,love my new adder crossbow,but the original arrows are to expensive,so we make them ourselves.............Love your vids man subscribed and Greetz from Amsterdam.........
Good luck! 👍🙂
i was just looking at videos to try and find the diameter of these cobra r9 bolts , i've not shot my pistol crossbow in a few years , but i dug out the old bolts i made and had a few shots with it today , bolts for pistol crossbows are shite , but as i used to make my own archery arrows when i shot competetively , i made some , i also made some with nail points which were great for timber shooting , i'm about to make some more , but i was curious how thick these shafts are compared to the crap abs ones ..... my mybo target is also crap for pistol bolts ,so that's something else i'll need to make
Hi there. The cobra r9 bolts are 7.6mm in diameter so too fat to use in a pistol crossbow, unfortunately. 😒
@@jonwoodhousea.k.a.pistolcr3943 i thought they looked thick , i'll just use my usual arrows then , thanks for letting me know
If you can still get them, the "zombie" green bolts are probably the best ones - aluminium with a very sharp screw in tip.
@@jonwoodhousea.k.a.pistolcr3943 yeah they look the best of a bad bunch for sure , the ones i made are 7.5 inch but i think the pistol bows would be more accurate with 9 or 10 inch , so that's what i will make next , and the beauty of a longer bolt, also means you don't end up losing it inside a target like mine , although my target is not really meant for crossbows ... but a 6 inch power stroke don't mean it should be a 6 inch bolt , but thats what they seem to do for the pistols , carbon is lighter so it's dont hurt to go longer, i did wonder why you use glue for your points , if you damage a shaft, keeping the point becomes tougher , i only use the arrow building melts , they look beasty though , even though in the UK there is no real advantage to use them as the razor types break easily into anything other than soft flesh , i made some quality target ones , and the best ones i did that could be used on most surfaces, was a friggin nail point lol , go figure
What typee Ed of bolts for the redback, ive got two of those& a cobra r9 too mate👍
Sorry, I don't understand your question, try again!
Nice !!
Thanks!
Do normal size broadheads screw into these?
Only if you glue in the aluminium inserts which you can get from ebay and which are threaded.
@@jonwoodhousea.k.a.pistolcr3943 Ok.I had bought some bolts just like this that already had threads
They should work well.
What size are the screwable arrow heads?
Hi. I don't know the exact size, I'm afraid but I can tell you that the diameter of the cobra r9 bolts is 7.6 mm. 'Hope this helps.
Cool 👍
Glad you like them!
would those fit in the cobra adder??
Probably not, because of the "magazine ". I suppose you could remove it though and then they should be fine.
They do but I had to file a few mm off each edge to the 2d broadheads fit.
Can you do a how to vid on makeing them?
Sorry. I've got no more parts left.
Live in South Africa? Get one of these fast repeating tactical crossbows :
ua-cam.com/video/jBisrb4STLg/v-deo.html
Looks good!
@@jonwoodhousea.k.a.pistolcr3943 shared your vid about shoulder stocks in one of my videos descriptions where I show my makeshift stock made from a paint roller
@@CrossTactics That's great- thanks!
Crossbow bolt nerd pmsl 😂