Ferrari F430 SC Engine Rebuild | Engine Burning Oil.
Вставка
- Опубліковано 23 бер 2023
- The engine of this 2009 Ferrari F430 SC burned oil and made unusual sounds, so it needed to be disassembled for repair.
Let's see how Cus Racing's mechanics perform engine repairs on this supercar.
How do you see the workmanship of these mechanics?
#ferrarif430sc
#enginerebuild
It always amazes me that mechanics know where everything goes when reassembling a motor
Pure luck
U get use to it i open a s63 amg mercedes engine 3times until i fix and that engine was like a book to me i can open that engine now for like 8 hours
One thing we never see in these total engine rebuilds: they never turn the engine on at the end 😂
Not always. Is neccessary to support with order strategies. Put bolts in bags, or in the piece removed. Take pictures, mark them with some Sharpie or eraser, etc
After you do it several times it gets easier.
I just love watching rebuilds and mods on engines. Bringing back old rusty motors and giving them a new life
Excellent work!!! At the end of the video may be you could give us a start up sound of that piece of art!!!
Clean, neat, organized and even torque wrenches! Great job👍🏻
Man, makes you appreciate how beefy a LS block is compared to this. Nice work!
Better off slapping a ls in it actually!
Recently on the no prep drag channel there was a stock block/bottom end 5.3 in the high 7's.. there's never been a time when hp was this cheap.. Hotrod zine did that mostly stock 4.8 with Chinese ebay twin turbo setup and got well over 1200hp.. LS survived GM's 100k torture test.. Good Time to be Alive! 😁
@@freshkryp69love Richard Holdeners work there that did that project
@@freshkryp69 LS are marvel engines
It boggles the mind,mine precisely; the work flow rhythm, expertise is a joy to watch! Thanks.
Молодцы ребята, хорошая и большая работа. Главное, чтобы движок ходил долго
I am impressed. It looks a job well done.
Fantastic.
I never thought I would say this about a Ferrari, but that is a well designed and relatively simple engine.
It’s REALLY similar to a coyote engine
Yeah, the mechanics were great no problem there. But i would have loved to hear it rin
Great work guys!...
Ok this is simple I wanna learn more about the Electric part or the cars and the programming.
I've been working in a shop from scratch not knowing anything about cars and now I understand a lot about cars this is my 4th month and I think I'm doing ok. The funny part about cars is the fact the more you learn to more you realize you don't know. I've rebuild a couple of engines and run dozens of diagnostics here and there I understood how to change most parts of a car.
Great job
Apart from the wires, hoses and all that shit in the top of the engine, it's a beautyfully simple thing. Ferrari engines are way more simple then I expected them to be.
What amazes me is someone let a Ferrari engine get this way!!!
Everyone wants a Ferrari until it's time to rebuild. This video appears to show only a freshen, bearings/rings/timing & possibly a valve job.
Bravi bel lavoro 🎉
Good job!
I keep rewinding while having my cofee thinking I missed something, it was rebuilt because it was "using oil and made a strange noise". If this is the remedy for every car using oil and making strange noises this must be the most expensive shop on the planet to go to. Did I miss what the diagnosis was??
Isn't oil burning usually due to worn valve stem sesls, valve guides or worn rings/bores?
If a low milage bottom end looks like that someone needs a talking to.
@@johanbjork1650 maybe they thought you only change oil every 30k miles.
Absolutely love your videos, especially the fact that you're assembling with engine oil. I'm not a fan of assembly lube.
What caused the wear though, judging by the heads and cams it wasn't very high mileage, needs more investigation for me
Probably just revving like a madman (st*pid) with a cold engine (st*pid combo x2) repeatedly which is commonly done to these beautiful engines
Cause? It's a Ferrari.
Looks like poor maintenance
Well scored bottom end shells were a clue.Probably low on oil.
Wow beautiful wonderful video l am look shock 😲
a cold start after the repair would have been awesome
It blew up
Cool video
Mechanics in the comments already know, but this video exemplifies why when you receive a “rebuilt” engine you have to completely tear it back down yourself to measure every single bearing clearance and check every single part to confirm it is actually ready to be run.
At least on this video they don’t show any measurements.
Ummmm. Did you watch it? This so called crack team of race mechanics didn't show or say anything about using a reman engine, nor did they measure anything, NOR did they use gaskets where gaskets are needed. I'm no Ferrari tech, but that engine is gonna leak oil.
Who has time for that? Or who is going to pay for it? If I have to tear it down and build it back, I would just rebuild it myself. I buy rebuilt engines from Mercedes, BMW, Honda, and just as they come out of the box they go into the car.
It would be a 30 hours video if they show everything. Those engines require a full measurement and clearance of everything.
The owner will not take that car to a corner shop n ghetto street.
If you are a real mechanics, not a you tube fake ass mechanics installing brakes in your garage, you know the complexity of European engineering. So don't be a hatter
@@felixsantiago5606 Actually, I am a factory certified Ducati technician and know just a little about how to build an engine. If the proper work was done on this engine, they would have been proud enough to show quick jump cuts of them measuring tolerances and and other important details. It could all fit within a 10min video.
Wurden die Zylinder nicht vermessen, gebohrt, gehohnt? Stossspiel der neuen Kolbenringe eingestellt? Hauptlagergasse gemessen? Pleuel vermessen? Ventilschaftdichtungen erneuert? Hier fehlt so einiges für eine gute Motorüberholung…
Herr Prinz you are quite correct. All of your questions need an honest answer.
🌞😎😍 That was fun!!!
Absolutely fantastic video.
I presume the gaskets used were ""rubber"" otherwise why cover them in oil?.
valve guide freely smooth.not stuck.
Could it be possible to do a full video because i may receive this engine for a swap in like 1 month (already ordered and i’m in engineering) and it would be nice to see how you rebuild it !
When the valley cover is off, what are those openings on each cylinder?
Coolant passages? Oil drainage?
At first it looked like a 2 stroke, was like wtf?
Too bad they didn't start it, so we could hear a fresh Ferrari motor build.
Magnique travail top
great job! like the mechanics of Modena.
Eskisinden ayın yenisi den ayını.❤❤❤❤
เฉียบขาดมากๆ งานดี เอาไว้จะเอาไปให้ ซ่อมบ้าง มีหลายคันที่บ้าน
Cost of repair?
I learned the reason the engine burns oil is a combination of a few things. The piston rings could be burnt up, the valves could be bent, the valve seals in the cylinder heads probably need to be replaced.
They receive rebuilds because tolerances are so tight in these cars that over time, the stresses cause them to wear out. It's not like pushrod v8s that can have larger thresholds. These are designed to be at limit from manufacturer to foot.
Great !
Do you have a full video with the hole job?
Nice good
Qe hermosura qe calidad
Looks like the crankshaft journal may have hit the main cap studs @ 1.55
Engine looked wonderful after cleaned repainted but what the hell was the diagnosis? was time taken to measure bearing clearances, crankshaft thrust and a thousand other things? What all needed replaced?
Don’t think they measured anything. Looks like a “good’nuff” slap-it-back-together kind of job. Not how you or I would have done it.
Diagnosis is not hard: replace the driver for one that lets the engine warm up before doing childish things like revving to the limiter...
@@wolfmanradio hopefully Kim speaks sarcasm 😜
@@wolfmanradio
Crank was re ground etc and they thankfully left out all the mundane stuff.
This was a race motor? How many hours on it before failure?
What is the approximate cost breakout on parts and labor? Parts alone must be near 25k. New con rods for the shiny pistons? I also assume by refurbishing the wiring harness, you mean replace? On second thought, more than 25k for parts.
I was surprised seeing the 'head gaskets' oiled before installing. I have never seen that done before. Could the M Mechanic channel respond to why this was done? I have always been taught that head gaskets are always to be installed dry; as many have a wax coating on them. Overall, I enjoyed the video.
I'd guess it's to ease any binding, when the head is being torqued down. Essentially help ensure the gasket sits completely flat(?).
@@elgoog7830 I might also agree with your speculation as to the "why" they did it this way? However, since this is a "Professional racing team" doing the rebuild; I was hoping to hear from them directly; as to why they did it this way. Unfortunately, there is no response from the "Pros.?"
Or why they drench their hands in oil just dropping valves into the head.
@@johnedwards785
I'm very educated in mechanics and engines in general.
I am not saying I am correct, but it's an educated assumption.
That being said, it may just be that particular engine builders method of assembly, because putting oil on a head gasket, I wouldn't say is typical, nor ethical. But also wouldn't say a thin layer of oil would hurt anything either.
They’ve done that before.
I wonder how many miles did the engine have prior to the rebuild?
20тыс.миль
A few thousand at best. At the end of the day, we're talking Fiat/Chrysler, not Toyota Lexus level reliability!
@@utubecomment21 Тойота уже далеко не надёжная.
Το πρώτο θέμα είναι,τι άνθρωπος έχει το αυτοκίνητο!
Εκτός που δεν το έπλενε... πρέπει να το είχε αφήσει και με λίγα ή καθόλου λάδια.
What is it 30° in that shop. I'd have issues with every 6mm with those gloves on.
So why was it burning oil ? Why was it making a weird noise? What did you do to fix it ? What happened to the crankshaft etc?
Didn't even resurface the heads....
видео классное это не сомненно, но в конце очень не хватает кадров со стендовых испытаний с полноценным звуком.
Mama mía !!! 😱
How much does a rebuild like that cost ?
$17k
Les recomiendo que la proxima vez lo desarme un experto de ferrari, ustedes no tienen el equipo necesario y el conocimiento necesario para arreglarlo.
👌👌👌
Seems like an easier rebuild than my VW ea888 engine 😅
How many miles were on it?
Super motor V8!
Kol yatakları 1.6 multijetle aynı mı?
That engine is surprisingly rough looking for a 2009. What's the mileage and where does it call home? Ferrari's are not usually daily drivers. I have engines over 100K that look better.
So Ferrari uses BMW power steering reservoirs... interesting. I wonder what else is outsourced.
European cars share a lots of their parts. I've seen audi with porsche parts including the name on it.
Lamborghini use VW coils.
Audi is the union of 4 car companies. Imagine that
Get rid of the gay club music.
I would prefer some sounds of the workshop. And of course the engine startup and testing sounds as the cherry on top.
Мотор Италия, а запчасти Китай🇨🇳 молодцы 👍
But did it start though?....
What was the mileage? 10-15k? That engine was fairly new looking 😂
Hi ! May a have course pratice in your place ? I can work without payment. Thank you very much !
Wonder the total cost for this job?
Possibly Free,just take your car to Walmart for an oil change.. not long after,the courts make them buy you a new engine. Simple 🙂
How do you get Chinese cams in a Ferrari?
เวลานี้เขาปลี่ยนเป๋นไฟฟ้า100%ไปไกลแล้วครับ
Apakah itu mesin V8?
Itu mesin yang sangat besar
lol without plastigage ) what your journal bearings gap? )))) - hmmm what is it?
Даже головки не шлифовали. По плоскости видно. При установке обездиривают, дааа эти моторы собирают при минусовой температуре
Motor complexo e moderno
I wanted to hear the sound of the engine
Man... its really hard to appreciate until its undressed.. what a beautiful machine. Wow..
Wheres the bag of nuts and bolts they had left over, when they finished.....
😉😉😉💯💯💯🔝🔝🔝
0:15 cus cus o mello
Toyota: what’s an engine rebuild?
Охуенно конечно, но не хватает концовки со звуком работы мотора)))😊
And thats why they charge hundreds a hour
V10 or V8 better
Good looking job but I hate how they're using Allen style bolts, prone to strip
Not if they are torqued to spec.
@@RGV2300 high quality tools are also made to tighter tolerances and therefore fit better and less likely to rond out the bolt head.
This whole rebuild probably cost just as much as the car
That's a $100k plus build right there..
I was
Thinking same thing lol that engine looks a little simular to s63 i open to rebuild exept the intake is diff he changed everything on it lol thats a dam expencive
Why is it so expensive. I mean it's not made of gold
No way, that was $20k tops.
you can get that complete engine for about 60-70K with reasonable mileage, so I'd assume a rebuild is a fraction of that. 20-30k sounds, including labour sounds right to me
@@torqued111 15-20k is more like it
Wow! The mating surface of the block and cylinder heads do not look clean enough 2:35 poor service.
ymmy
なんか無ゃくちゃですね😂
僕、プロなんで😊
Oiling an MLS gasket is absolute NO why would you do that?
At least run it!!
The price of maintenance is like to buy a new Ferrari
It is very high.
Why this music..??🤕
Do not make longer and varied engine vs disassembly collection videos that would not be like this thank you 😅
So it can be done in under 5 minutes 😂
😆👍
new bearings and not a single clearance checked 🤦♂️ yikes.
Gay turbo music
Music ruined this video big time!
Music is Hella annoying
I hate unusual noises…I only like usual ones…
А головку шлифовать забыли?
Finally, the comment of the Russian expert on supercars!👉🇷🇺🤣🤣🤣
Anyone else cringe a little when he was touching the main bearings with his bare hands??