Thank You Thank You. Just paid $75 for handyman programming a new universal remote. Said outside remote didn't have manual and would have to come back to see if he could do it. Told him rip me off once shame on you rip me off twice shame on me. I can't believe I was able to do this. I am 73 and not very mechanical savvy. Thank You SOOOOO much for your service.
i have 3 of these garage doors for my garage. this worked for 1/3 doors keypads…. When i did it on the other 2 the lightbulb never blinked and now none of the passwords work, old or new. Any tips?
The reset when you know your pass code was very helpful, however in the reprogramming unless you are somebody that knows what they’re doing you don’t know where the motor is. I know it sounds stupid but people like me I had no idea that it was actually.
Hi, would you know the model number of the keypad shown in this video? I lost my cover, and would like to buy a replacement part but I have no idea of what that is. Thank you!
Why I can't find video on what to do for this, but when the door is closed and you can't get into the garage to press that code ? Is there way to open door, when it's closed and you forgot the key code ? or are you sol ?
@@SocaBoy-ms9cn yes, I didn’t catch that part the first time. I winded up going ahead and getting this keypad after asking around to people who already had it. Had I been paying closer attention to this video I would have known the answer to the question I was asking people, and wouldn’t have had to ask others in the first place. 🤦🏾♀️
Thank You Thank You. Just paid $75 for handyman programming a new universal remote. Said outside remote didn't have manual and would have to come back to see if he could do it. Told him rip me off once shame on you rip me off twice shame on me. I can't believe I was able to do this. I am 73 and not very mechanical savvy. Thank You SOOOOO much for your service.
You sync the hand remote the same way.
Thanks. Very helpful tip for somebody that bought a home from a previous owner and didn't have a manual.
Simple and easy to follow instructions, thanks so much! What on earth did we do before youtube? :-)
Thank you for posting! Saved my husband and I lots of time since we couldn't find the manual. God bless you!
Awesome! Absolutely works and on the first try! Listen for the clicks if you don't see the light blink. 👍🏼👍🏼👍🏼
Thanks! Holding down the Enter button for a couple seconds did the trick!
Great instruction very clear and simple thanks
How about if my keypad does not have the “enter” button. It only has the # and the * buttons .
IT WORKED!! YOU'RE THE REAL "MVP"
Thank you! Someone changed our code when they delivered with Amazon. This video helped change it to something we can use again.
It was Chad
😮😮😮
Thank you very much! This saved my Dad a lot of money
My keypad doesn’t have an enter button so what do I do?
Thanks for showing me how to do it outside, while I'm locked out, with a method where I need to be inside.
Think about it...if you could do this from the outside only, ANYONE could reprogram your keypad and access your garage.
Thanks for the simple explanation.
Will changing the code on pad lock will cause a problem with my two remotes?
i have 3 of these garage doors for my garage. this worked for 1/3 doors keypads…. When i did it on the other 2 the lightbulb never blinked and now none of the passwords work, old or new. Any tips?
What do you do if you forgot your code and need to make a new one when you buy a new house
curious why you wouldn't take a picture of the 'learn' button and how to find it. i got that from another video.
Thank you Jake, it was really helpful your video for me. I set the keypad by myself. It was so easy after I saw your video. Thanks a lot again 👍.
Thanks, could not find the info anywhere on how to change from an old code to a new one. Appreciate the help.
Worked perfectly….. thanks man 💪🏻🙏🫶
Dude I appreciate your video it was like a huge timesaver for me thanks a lot garage door man
Easy to understand and to the point. Thank you
check!! It took me 3 min in all ....thanks again
Really helped me out, thanks for posting this!
Best video ! Thanks
what if the code stopped working and I can't get in the garage to hit the learn button?
Then you aren't the homeowner Haha.
@@LH-tc6so hahaha. Car parked too close to the door, which opens inward. Lol
@@mynameisdanimal so no entry to garage from your home?? Try changing the outside entry pad battery, and then use your old code
If i forgot my old code, how do you reset it?
Thank you. Very helpful.
10 years old vid still so relevant
Thanks. Very useful.
How do I reset my pin # on a slicker keypad when there is no enter key and change my pin #?
The reset when you know your pass code was very helpful, however in the reprogramming unless you are somebody that knows what they’re doing you don’t know where the motor is. I know it sounds stupid but people like me I had no idea that it was actually.
The motor is the part that opens to door. It has lights and hangs down in the middle of your garage. The learn button is usually under a light cover.
Hello Jacob, will this reset your car remotes? I only need to reset the keypad.
No, but if you want to reset them you would need to sync each remote individually.
Nice. very easy with your video. Thank you.
I just bought my house i dont know the old code, what do I do?
Really healed.
Very helpful - Thank you so much!
I just bought a brand new xterme garage wireless keypad and I followed the 3 easy steps and didn't work! What you suggest me to do??
Daniel Ayala i’m in the same boat. Can’t reprogram entry pad or old remote. Maybe they are too old and incompatible?
Hi, would you know the model number of the keypad shown in this video? I lost my cover, and would like to buy a replacement part but I have no idea of what that is. Thank you!
Can I change the keypad itself and update it to a universal keypad?
Dude I have the old code and changed to my new code and now both codes work. And same thing when I hit the learn on back of motor
Did you figure out how to remove old code without resetting all of the remotes?
Other videos I've watched says you need to hit the "learn" button and you have 30 seconds. Why is your video different?
My keypad does not have a # sign or * key…how do I change a code without it?
What if you dont know the old code?
my garage door keypad don't have a ENTER button. what can i do?
mine doesnt have a # sign, but has enter key, any suggestion?
Thank you for this! Helped a lot
Why I can't find video on what to do for this, but when the door is closed and you can't get into the garage to press that code ? Is there way to open door, when it's closed and you forgot the key code ? or are you sol ?
I kind of hope you are. Because if you can easily reset it without having access, then ANYONE can simply reset the code and open your garage door.
Jacob Armstrong still have to have the old code, so no
nice, quick and helpful.
Great info thank you sir !!
As a society we decided that the only thing that could make a person feel good is that we can do what they say
mine doesnt have an enter button. how do i reprogram it?
Oh shit, it works!
Thanks
Perfect easy to follow instructions.
ours doesn't have an enter button,
Neither does mine but it does have a "start/stop" button, which worked just the same as the enter button. Hope that helps.
Good video
thx Jake for the information!!
where is learn button
You didn't even show where the square bottom was
Thanks, it works..!
Just saved me a ton of aggregation. Thanks
Wayne Dalton garage door manual
Worked for me :-)
Thank you.
Thank you!!
mine doesnt have an "enter" button
mine doesn't have the enter button?
***** I called them and was able to fix my problem.
Neither does mine but it does have a "start/stop" button, which worked just the same as the enter button.
Thanks.
Weres the motor
If you dont know the previous code. How to reset it.
I moved in a new house and don’t know the old code how to reset the key pad
@@drasim79 No clue Bro
@@Kashi82 I pressed the Learn button for 10 seconds it wiped all memory from the keypad. Then I started the whole process and it worked
It will work for red/orange not purple
Resetting garage keypad with no enter button
Hi
I forgot my pin....CANNOT get in
wow
All robbers be like😏🤓
As usual, the info on the video does not match. There was no learn button on the motor anywere. So from the start the video is totally unhelpful.
I was just going to get one of these but I would basically be giving thieves easy access to my home! 😱
He said you hit the learn bottom on the inside or the garage then come outside to where the keypad is. Pay closer attention to the video again
@@SocaBoy-ms9cn yes, I didn’t catch that part the first time. I winded up going ahead and getting this keypad after asking around to people who already had it. Had I been paying closer attention to this video I would have known the answer to the question I was asking people, and wouldn’t have had to ask others in the first place. 🤦🏾♀️
Bouta rob my neighborhoods
Wrong. Nope. All this did was create 2 working code. Dumb video
Thanks so much!
Mine does not have a learn button