No script and that was honest to god my first time using it! I liked it even more after using it. It takes no pressure at all so it's super easy to clean your bars.
Just ordered this. Thank you for your review & discount code. Small home (garage) gym w 605 lbs of FringeSport bumpers, PRX Performance rack, home made pulley system (that’ll hold some weight) along w (all 7) MAG Grip handles, standard Rogue bar, shorty bar & EZ bar. Can’t wait to clean my bars!!
Thanks Josh, I saw your order come through yesterday! FYI, we are hoping to start fulfilling orders in about 2 weeks. 🤞 We are waiting for our shipment to be delivered to our distribution center in the Dallas area.
It pays for itself in time and longevity of the product lasting a long time. I wasn't sure how it would go and that was my first time using it so a bit a reality TV for my followers! ha ha
I'm curious to try this product! I clean and restore a lot of barbells. Veteran owned is a big plus for me as well. I use a lot of different brushes for bars. But I think this would speed up 3inONE application which is typically the finishing step for most restorations. Also, I love bare steel barbells and a lot of my vintage bars are bare steel. So regular maintenance is a must. This would speed it up.
It's that thing I didn't really know I needed until I got it. I tried various other brushes and they got the job done but NOT well! I'm guessing in the restoration world this might come in handy.
Candidly speaking I’m not too familiar with bare steel bars so I was pretty excited to hear Mac’s take them in regards to our brush. Something we haven’t talked a lot about is the maintenance of the brush itself. Once the brush is full of oil and gunk you can easily clean it with some warm water and dish soap. The brush is back to looking brand new.
@@barbellrescue The cleaning of the brush is a nice thing. Regular oiling is helpful for bare steel bars to prevent and treat rust. Especially in humid areas and for garage gym lifters, oil and a brush are important.
Thx for the awesome review! You hit the nail on the head! I know some have asked if there’s an affiliate link or discount so we just made one for you. Use MAC10 at checkout to get 10% off!! Thanks again brother for all the kind words! 🙏🤙
@@billchurch4460 absolutely! Currently we do not have a projected timeline for a steel and/or brass version. We wanted to see how the nylon version was received by customers & then go from there.
I think I'll stick with my hybrid athletics 360 barbell brush. If this barbell rescue brush wrapped all the way around a 29mm bar, I'd entertain grabbing one, but for $50 I don't think so. No brass or steel brush insert options either. This market needs more competition.....
Indeed, thanks for the feedback! Brass and steel options are in the plans for our 2nd production run. Currently we do not have a timeline when that will occur and it will largely depend on how the rest of the year goes. In regards to the price, we understand. Although, most people we've received feedback initially are quite impressed with the quality and effectiveness of it. When we started down this invention journey, we felt 26-28.5mm was the sweet spot to be the most inclusive specialty brush. Improving the effectiveness on larger diameter bars, such as your 29mm bar, is something we've heard a few times now and will definitely be discussed as we move closer to that 2nd production run. Thanks again for the input, it's greatly appreciated. ~Kim
Pumped for this! Owner is a GREAT GUY! Chat on Instagram too. The packaging is SICK! Happy to see his success and thanks for helping him out with this review we got today bro 💪🏼💪🏼
(Updated)👉🏻Use code “Mac15” for 15% OFF!!!!
Purchased! Thanks
Awesome! Thank you!
Thanks Brandon!
Nice, I may look into this!
It's that thing you don't know you need until you get it.
Waited all week for this video and you definitely delivered! This video got me sold on buying this item
No script and that was honest to god my first time using it! I liked it even more after using it. It takes no pressure at all so it's super easy to clean your bars.
Saw your order come through this morning, thanks Francis! 🙏🤙
@@barbellrescue you’re welcome. I can’t wait to try it out 💪
What's the word Francis, how's that brush treating you?!
definitely when I get more barbells. great review!
Thanks John!
Just ordered this. Thank you for your review & discount code. Small home (garage) gym w 605 lbs of FringeSport bumpers, PRX Performance rack, home made pulley system (that’ll hold some weight) along w (all 7) MAG Grip handles, standard Rogue bar, shorty bar & EZ bar. Can’t wait to clean my bars!!
hell ya! Sounds like a nice home gym set up and this brush is the thing you didn't know you needed until you get it! enjoy.
Thanks Josh, I saw your order come through yesterday! FYI, we are hoping to start fulfilling orders in about 2 weeks. 🤞 We are waiting for our shipment to be delivered to our distribution center in the Dallas area.
Hey Josh, I hope our brush is treating you and your barbells well! Would love any feedback you may have!
Awesome! I ordered one. Time is money to me and a “small” amount of money is worth it to save time.
Thx Mark, we completely agree! Appreciate ya! 🙏🤙
It pays for itself in time and longevity of the product lasting a long time. I wasn't sure how it would go and that was my first time using it so a bit a reality TV for my followers! ha ha
How's our brush holding up for ya...saving ya time cleaning?!!
@@barbellrescue It is really good!
I'm curious to try this product! I clean and restore a lot of barbells. Veteran owned is a big plus for me as well. I use a lot of different brushes for bars. But I think this would speed up 3inONE application which is typically the finishing step for most restorations. Also, I love bare steel barbells and a lot of my vintage bars are bare steel. So regular maintenance is a must. This would speed it up.
It's that thing I didn't really know I needed until I got it. I tried various other brushes and they got the job done but NOT well! I'm guessing in the restoration world this might come in handy.
Candidly speaking I’m not too familiar with bare steel bars so I was pretty excited to hear Mac’s take them in regards to our brush. Something we haven’t talked a lot about is the maintenance of the brush itself. Once the brush is full of oil and gunk you can easily clean it with some warm water and dish soap. The brush is back to looking brand new.
@@barbellrescue The cleaning of the brush is a nice thing. Regular oiling is helpful for bare steel bars to prevent and treat rust. Especially in humid areas and for garage gym lifters, oil and a brush are important.
Looks like a great product. How do you clean the brush when it gets all messy inside with the oil and dirt?
I just put it back in the container. You can remove the inserts and clean them under a hose and degreaser if you need to.
I’ve been using dish soap and warm water. Makes it look brand new! A degreaser is a great idea as well!
Very cool!
Thx for the awesome review! You hit the nail on the head!
I know some have asked if there’s an affiliate link or discount so we just made one for you. Use MAC10 at checkout to get 10% off!! Thanks again brother for all the kind words! 🙏🤙
Scratch that, let’s make it MAC15 for 15% off!
Thanks! That covered shipping!
Cool product. Any plans to offer additional bristle types in the future?
@@billchurch4460 absolutely! Currently we do not have a projected timeline for a steel and/or brass version. We wanted to see how the nylon version was received by customers & then go from there.
@@barbellrescue Great. Thanks for sharing.
This is awesome! I am in the market 🤔😉
It’s something you buy once and your good for life.
I think I'll stick with my hybrid athletics 360 barbell brush. If this barbell rescue brush wrapped all the way around a 29mm bar, I'd entertain grabbing one, but for $50 I don't think so.
No brass or steel brush insert options either.
This market needs more competition.....
Thanks for the feedback. I'm sure the owner will take that into consideration as he's often on UA-cam. cheers!
Indeed, thanks for the feedback! Brass and steel options are in the plans for our 2nd production run. Currently we do not have a timeline when that will occur and it will largely depend on how the rest of the year goes. In regards to the price, we understand. Although, most people we've received feedback initially are quite impressed with the quality and effectiveness of it. When we started down this invention journey, we felt 26-28.5mm was the sweet spot to be the most inclusive specialty brush. Improving the effectiveness on larger diameter bars, such as your 29mm bar, is something we've heard a few times now and will definitely be discussed as we move closer to that 2nd production run. Thanks again for the input, it's greatly appreciated. ~Kim
Pumped for this! Owner is a GREAT GUY! Chat on Instagram too. The packaging is SICK! Happy to see his success and thanks for helping him out with this review we got today bro 💪🏼💪🏼
Thanks bro! Have a great weekend.🤙🏼
Thank you for those awesome words!
#smallbusiness I could not agree more
Hell yeah! 🇺🇸🇺🇸🇺🇸
More 🇺🇸🇺🇸🇺🇸🇺🇸 companies!