I did not go through all your comments. Questions : do you have a supplier now for these kits? A full fis? can still be updated? I ask since i would like to refresh the display in my R32. Thanks
Yes compatible. Probably can't find them because they've not been made for a good 4 years now. Next best is 3dcolormfd. Google should take you to a Facebook group where you can order.
I have a full screen in my 06 TDI I can source a half screen for my car no problem, but when altering that one will it display the correct mileage to my car or the car it came out of?
@@ziggyortiz37 not sure which car you have but for most Audi VW they already have this feature built in so no need to add a separate one. They're called an after run pump and usually controlled by the rad fan control module or ecu. ☺️
@@ziggyortiz37 I think it does. www.google.com/search?q=audi+a4+b5+after+run+pump+1.8t&client=ms-android-google&sxsrf=AJOqlzVvi7RtuHw6FUcR4STQvhFlVk4d8A%3A1678571056203&ei=MPYMZK6LDMS93LUPk4W-oAE&oq=audi+a4+b5+after+run+pump+1.8t&gs_lcp=ChNtb2JpbGUtZ3dzLXdpei1zZXJwEAMyBQghEKABMgUIIRCgATIFCCEQoAE6CggAEEcQ1gQQsAM6CAghEBYQHhAdOgoIIRAWEB4QDxAdSgQIQRgAUMoSWL0dYPEfaAFwAHgAgAHuAogB7gmSAQcwLjIuMi4xmAEAoAEByAEHwAEB&sclient=mobile-gws-wiz-serp
hey m.b. - that's right no need for coding because you are using you roriginal instrument unit. If you want to use a 2nd hand unit then you will need coding. Yes you need the controls on steering wheel to control it - otherwise there's no way to control ;)
Hi IanPG, I have an 06 VW golf mk5 gti with a stuffed cluster(half mfd) and I have another cluster from a mk5 with a full mfd. is there any way I can plug the top board onto my immo board and have it function?
Hello NS it's a great question! It's not that simple. I mean try it (there's no harm doing so) but I don't think it'll work. I tried in my TT 8J cluster and it doesn't work like this. Let me know how you go :)
Hi Alxar - it would be better to source a half screen one and code that to your car. Then use the half screen one to install ColourMFA into. The challenge with the full screen version is the comfort menu. So far I can't figure out how to remove this function from full screen. On half screen cluster it doesn't have the comfort menu making it more suited to the retrofit.
Damn lol Was gonna ask how much to do the job for me, I'm very good with mechanical works but little fiddly electrical jobs I shy away from as I'm pretty much useless at it lol
@@sbr1160 hey shoot me a PM here for prices ( i am sold out of kits atm though) facebook.com/FISClusterCare Yeah the electrical stuff can be a bit fiddly - like colourmfa installs ;P
Woohoo! Golf Mk5's clusters can now have this awesome mod! What do you think? Is it something you'd DIY or would need help installing?
I would need help installing, do you do these mods for others?
@@The_flagman yep I do the installations (in Australia)
@@ianpgonzaga Yep I'm in Aus
@@The_flagman yep feel free to get in touch via socials
What is the size of screen?
I did not go through all your comments.
Questions :
do you have a supplier now for these kits?
A full fis? can still be updated?
I ask since i would like to refresh the display in my R32.
Thanks
Hey there. These are actually no longer available.
If you search for 3DColormfd you'll find your supplier.
Can i buy an already available instrument cluster and not open it up and upgrade.
Hello - the only way to upgrade with this type of screen is to open it. There are others with colour screen but the upgrade in functions isn't as big.
Where can i get the kit for this? Do i just buy an arduino and a lcd display?
@@_Drekavac_ hey. Nah not that simple. These actual kits haven't been made I a Very long time. Find the forum ColorMFA.ru for any updates.
@@ianpgonzaga surprised its that hard to get how good and easy this mod is, are there any alternatives or thats just it?
@@_Drekavac_ alternatives - 3Dcolormfd and hypeFIS color
Is this compatible with 2007 Jetta mk5? And where can I get one that is? Google is setting me up for failure 😢
Yes compatible. Probably can't find them because they've not been made for a good 4 years now.
Next best is 3dcolormfd. Google should take you to a Facebook group where you can order.
Where can i have this done in cape town south africa
might need to find someone local who can do the soldering in for you :)
I have a full screen in my 06 TDI I can source a half screen for my car no problem, but when altering that one will it display the correct mileage to my car or the car it came out of?
Good question. You will need to adjust the mileage to match your original.
Hi Ian do you do a mail order service? Would prefer an expert to swap it out!
Hi bling bling. People in Australia do send me their cluster to repair / upgrade so it's an option if youre in the country. ☺️
@@ianpgonzaga excellent I’m in Australia what’s your best contact?
Is there a way to wire in the turbo timer feature? I swear I seen u could do that somewhere online
Hey Ziggy. To run the engine a little bit after turning off the car?
@IanPG yes sir! I could try to find it for ya so u can check it out could be something u could implement in ur services
@@ziggyortiz37 not sure which car you have but for most Audi VW they already have this feature built in so no need to add a separate one. They're called an after run pump and usually controlled by the rad fan control module or ecu. ☺️
@@ianpgonzaga I wish I had that 😅😅 I don't think 2000 a4 quattro 1.8s came with that kind of feature
@@ziggyortiz37 I think it does.
www.google.com/search?q=audi+a4+b5+after+run+pump+1.8t&client=ms-android-google&sxsrf=AJOqlzVvi7RtuHw6FUcR4STQvhFlVk4d8A%3A1678571056203&ei=MPYMZK6LDMS93LUPk4W-oAE&oq=audi+a4+b5+after+run+pump+1.8t&gs_lcp=ChNtb2JpbGUtZ3dzLXdpei1zZXJwEAMyBQghEKABMgUIIRCgATIFCCEQoAE6CggAEEcQ1gQQsAM6CAghEBYQHhAdOgoIIRAWEB4QDxAdSgQIQRgAUMoSWL0dYPEfaAFwAHgAgAHuAogB7gmSAQcwLjIuMi4xmAEAoAEByAEHwAEB&sclient=mobile-gws-wiz-serp
@IanPg do you sell these?
Hey Khan - I used to but not any longer. I refer ppl to 3dColorMFD Facebook to get the kit and from there I can help out with installation.
Hey
So it doesnt require any coding because u only swap the mfd screen, right?
Also do u need Multifunctional steering wheel for this to control?
hey m.b. - that's right no need for coding because you are using you roriginal instrument unit. If you want to use a 2nd hand unit then you will need coding.
Yes you need the controls on steering wheel to control it - otherwise there's no way to control ;)
where can i bough it??
Google for ColorMFA
Hi IanPG, I have an 06 VW golf mk5 gti with a stuffed cluster(half mfd) and I have another cluster from a mk5 with a full mfd. is there any way I can plug the top board onto my immo board and have it function?
Hello NS it's a great question!
It's not that simple. I mean try it (there's no harm doing so) but I don't think it'll work. I tried in my TT 8J cluster and it doesn't work like this.
Let me know how you go :)
@@ianpgonzaga ah ok. My original board has some of the solder pads that would usually connect the dial motor to the rear of the circuit missing
@@nssc2305 hmmm strange. Did you try connecting them ?
I have mk 5 1.6 can i have this display?
Should be able to as long as it's the same plug in the back an half screen.
@@ianpgonzaga I have splited two half display today. What is The price?
Hi Ian, i have an 2008 golf mk5 with full size screen red colour mfa. Is it suitable for your colormfa?
Hi Alxar - it would be better to source a half screen one and code that to your car. Then use the half screen one to install ColourMFA into.
The challenge with the full screen version is the comfort menu. So far I can't figure out how to remove this function from full screen.
On half screen cluster it doesn't have the comfort menu making it more suited to the retrofit.
@@ianpgonzaga ok thans for the info i will look for a n used half screen then come back to you👍🏻
Where is the link to buy
The ColourMFA is out of stock at the moment sorry. Please keep an eye out on facebook.com/FISClusterCare for updates.
Can I order one you already installed for a Golf 5 GTI?
Hey there. These are out of stock at the moment 😕 they haven't been made since 2021 sorry!
@@ianpgonzaga super sad! Nice product tho
@@low1tjeh yeah it's super useful!
@@ianpgonzaga Are the Colourmfa's without cluster still available then?
@@low1tjeh I have no more kits available either.
Are you based in the UK?
Hi SBR I am in Australia ☺️
Damn lol
Was gonna ask how much to do the job for me, I'm very good with mechanical works but little fiddly electrical jobs I shy away from as I'm pretty much useless at it lol
@@sbr1160 hey shoot me a PM here for prices ( i am sold out of kits atm though)
facebook.com/FISClusterCare
Yeah the electrical stuff can be a bit fiddly - like colourmfa installs ;P
Where can I buy that?
Unfortunately these kits have no longer been available for a long time. I'm hoping supply opens up again but the Russian crew have gone quiet.
Hello. can you send me the screensaver file from 5:45?
Hi. That should be in custom animated logos from ColorMFA forums :)
@@ianpgonzaga There is one, but not animated (
@@ianpgonzaga can you send me this screensaver? on the ColorMFA website, such a picture is not animated