Hey guys, no need to spray your skateboard with water from a bottle. That's adding too much moisture to the deck. If you're worried it won't bend and conform to the mold, the PVA glue already contains water to do that for you. Hope this helps save you time on curing :)
I was typing "so the real question, how does it hold up compared to a store bought board?" but then I got my answer... Hahaha pretty sweet project though!
one question to you guys - thinking about creating one for my small friend. So the base clamp doesnt need to be perfect smooth at the pushing surface ? 00:09 ? Im talkign about this glued pieces of chipboard/plywood
Try to change the position of the shorter cross grain veneers. So that the „sewed together“ part changes place every layer. If theyre all at the same spot thats a huge durability loss...
When I saw the veeners and the press method, I said to my sefl, that deck does not look durable. A couple of minutres on the video and it snapped. Lol!
When u noticed the "swaying" u could have mounted two aluminium rails. But that's not so popular these days. Or what once was popular was plastic rails.
the musik is // Down in the Dirt from Epidemic Sound on soundcloud and fabian wieder mal nen richtig gutes video mach weiter so leider viel zu wenig subs :(
Geo Huete I believe he meant adding a layer of fiberglass to the veneer. I've tried it before by adding a layer of fiberglass to the bottom of the board once all the layers of wood were pressed and dry and it definitely makes the board stronger but you gotta be carful not to put to much resin on or it'll come out really stiff. I made a longboard though, not a skateboard.
It snapped because the cross ply veneer they used wasn’t one solid piece. Also idk what y’all were thinking but the wheelbase on this was all wrong, I could see the giant gap between where the truck sits and where the dip was. For those who don’t know what a dip is it’s the part where the kicks dip down into the concave. Not bad though for using what you had
I think it is not enough clamping force/not enough glue. You should be gluing both sides of each sheet(it is not clear if you did that). You should see a lot of glue coming out the edges. I have been reading on how to make boards.
Cryo I guess not all boards are the same slightly longer nose than tail etc but usually have a similar space between trucks, if you have skated a few boards you may have a preference and pretty much have an educated guess where you want them.
+Donovan Tong probably lowes or homedepot, they'll have the cheapest but it won't be the best quality if you want good quality veneer and don't mind spending some extra money on it go to a wood store, just go on google maps and look up one near you
Mr.roastyonutsack Jr. I know this is three years old but I wanted to comment that I've never seen veneer in Home Depot or Lowes in Northern California. Specialty wood working suppliers or online from skateboard material suppliers I would check those first.
What a shame!, the tricks are so toxic for skateboards and people. I preffer avoid all not necessary tricks, is the most intelligent decission. But, over all, congratullations for your work.
Can you make a tutorial on how to make the pressing box to make the shape of the deck?
I’m lookin for it tooo
I don't know if you will see this but can you make a video on how to make your press
And a jigsaw
I would say, use hickory and cut the profile you want with a band saw. Glue them together and plane it and sand it smooth and level.
Hey guys, no need to spray your skateboard with water from a bottle. That's adding too much moisture to the deck. If you're worried it won't bend and conform to the mold, the PVA glue already contains water to do that for you. Hope this helps save you time on curing :)
Thanks.
Very helpful to get an idea of how you make a deck.
From Jay
Hamilton, New Zealand
Where can i find a skateboard shaped paper? (0:31)
I really liked this edit dude!
+Blake Kent Thanks man!
So here is my question. Why does Fabian still only have 21k subs?
He should be in the hundred ks for real 💪
21k thats already a lot 😄
+Fabian Doerig dude your videos are so good and they deserve more, absolutely
+DVSKATE well you could help spread the word you know ;-)
It's totally the accent
Do they snap easier when u make them? Or did u use cheap veneer?
Jacob Brummett it was veneer
Why did it break? Did they not add enough wood laminate layers? Or were the layers too thin?
I was typing "so the real question, how does it hold up compared to a store bought board?" but then I got my answer... Hahaha pretty sweet project though!
how thick are the ply's tho
I got the same question too man, but ive seen people use 1/4 or even 1/8 inch thick plys. At least i think so man, dont take my word for it...
man
Use 1/16-1/22
@@CrumbsTaco okay man I think I’ve seen the same thing man. Thanks for helping out Bradley…
man
Fabian, you're so rad and an amazing skater keep it up!!!
one question to you guys - thinking about creating one for my small friend. So the base clamp doesnt need to be perfect smooth at the pushing surface ? 00:09 ? Im talkign about this glued pieces of chipboard/plywood
obviously yes the mold has to be nice and smooth before use it
Love it what varnish do you use because I just sanded an old board and would like to put some finish on it
Where did you get the veneers?
Dub Press Distribution
Very nice music and video too
+Federa HD (Fedesync) Thanks so much!!
This is so sick my dude!!
So cool!
Dat quality doe
What did you use to hold the cross-grain together. I'm assuming a thin tape which ends up in the lamination?
I am from belgium i love youre vids do give This board awai
I love skateboarding and I to dream of opening and making my own and opening up a shop
Try to change the position of the shorter cross grain veneers. So that the „sewed together“ part changes place every layer. If theyre all at the same spot thats a huge durability loss...
This was epic!!! :D
where did you get the plies
qualitativ wohl nicht fürs Skaten ausgelegt gewesen das Holz was ihr da verwendet habt ?
going to pickup my new tim o'connor deck tomorrow :3
How long did that skateboard last?
Tell me what veneer can be used instead of canadian maple?is there an alternative?
You got a tutorial on how to build the thing that shapes the skateboard?
When I saw the veeners and the press method, I said to my sefl, that deck does not look durable. A couple of minutres on the video and it snapped. Lol!
Moin!
Wie habt ihr die Form zum pressen gebaut?
That’s te big question everyone asks for
What's the thickness of the layers wood? And what kind of glue/adhesive did you use?
+LogRobin They were too thin... We've used 11 layers
When u noticed the "swaying" u could have mounted two aluminium rails. But that's not so popular these days. Or what once was popular was plastic rails.
Were you can buy that wood for your deck
What glue do they use?
what type of wood did u used?
Anywhere I could buy one online or something
My dream is to make my own boards start a company and keep people happy
How thick is the plywood you use?
where did you get the wood for the decks ?
the musik is // Down in the Dirt from Epidemic Sound on soundcloud and fabian wieder mal nen richtig gutes video mach weiter so leider viel zu wenig subs :(
try some fiberglass with resin next time. I had the same problem
+Sean Butler yeah you're right!
Geo Huete I believe he meant adding a layer of fiberglass to the veneer. I've tried it before by adding a layer of fiberglass to the bottom of the board once all the layers of wood were pressed and dry and it definitely makes the board stronger but you gotta be carful not to put to much resin on or it'll come out really stiff. I made a longboard though, not a skateboard.
Hey I was wondering if I could get a copy of the file you used for the mould?
+Fabian Doerig How thick are the sheets you use?
Maaan !! you're so good at videography !! y u no make it your job instead of a carpetner hahaha
DIY.. all you need is a band saw, belt sander, pillar drill and 3 friends to clamp it down before the glue dries
Do you have the template for the mold
Wow!
That wood veneer was paper thin lol.
Stuk Your supposed to use 1/16 veneer
@@calebsnake01 the veneer was cracked b4 pressing.
Added my like, the like count es now 420. My job is done.
+Juan Ramirez haha thanks so much!!!
all that work then it snaps lol
+SkaterPranks Tv haha that was a school project of my friend ;)
It snapped because the cross ply veneer they used wasn’t one solid piece. Also idk what y’all were thinking but the wheelbase on this was all wrong, I could see the giant gap between where the truck sits and where the dip was. For those who don’t know what a dip is it’s the part where the kicks dip down into the concave. Not bad though for using what you had
@@Deepockets1 But did they have fun is the question?
It snapped because it wasn’t solid they could’ve have waited for about 48 hours for it to be solid
You have to use half vaneers going horizontal and half going vertical
Hola donde se consigue la madera para la fabricacion de Skate? Necesito Informacion alguien me la puede dar
madera guatambu
which is the thickness of each sheet of maple ? thank you.
0.8 mm you better go for 1.5mm
can you do kaname skateboard Dacks
sick
That board broke. Is that a normal thing for this type of board
+Jake Abel The board was just not good enough. Maybe the wrong glue or so...
+Fabian Doerig in thinking the problem was pressure and maybe wrong wood you should have used a press not just clamps
I think it is not enough clamping force/not enough glue. You should be gluing both sides of each sheet(it is not clear if you did that). You should see a lot of glue coming out the edges. I have been reading on how to make boards.
How do you know WHERE TO PUT THE HOLES FOR SCREWS???????
Cryo I guess not all boards are the same slightly longer nose than tail etc but usually have a similar space between trucks, if you have skated a few boards you may have a preference and pretty much have an educated guess where you want them.
I want one
i used the same bearing as they did in this video
+Julia Griffiths they are the best
usted venden las matrises
+Joel Severino no solo las vaginas
easy
hey fabian what is the music's name on your new video part
+Ardit Kelmendi It's called Kite Lines check it out on Epidemic
Thank you fabian
what wood was used???
+Zefyron Bourne maple and walnut
+Zefyron Bourne Next time we wanna try ash-tree
Thicc board!
I would take those extra venneers
no i think it was just the wrong glue
Fabian Doerig can u give me one plz
omg ich will auch :D
there is you're DIY skateboard at the 2:17.
leave it to the pros when it comes to Decks
Where is the easiest place to get veneer?
+Donovan Tong probably lowes or homedepot, they'll have the cheapest but it won't be the best quality if you want good quality veneer and don't mind spending some extra money on it go to a wood store, just go on google maps and look up one near you
Okay thanks.
Mr.roastyonutsack Jr. I know this is three years old but I wanted to comment that I've never seen veneer in Home Depot or Lowes in Northern California. Specialty wood working suppliers or online from skateboard material suppliers I would check those first.
wait whattttt nike sb??
where did he get the mold
Ragaa you can't buy it you have do do it yourself but the good side about it it's you can make your proper concave!
that is just thick paper, needs to be maple wood
It was veener
@@calebpanti7610 2:13 this is not maple.
well, I guess lip slides are out!
Can I please have one
maybe don't segment the veneers? it'l just make the board weaker
Does some one now the song name?
You don't need to make a mole just used to old decks
can u make me one plzzzz i really need a new one
Go buy one...
2:18 uh oh! your board broke that easily?
i ike the board
fuck man. I really wanna make skateboards for real..
kul
1:23 music?
whats the music?
Check the comments ;)
+ThaBlueAlien Down in the Dirt from Epidemic Sound
can you please give me one of those skateboards
Eh Fabian mwbye u send me a deck i will make a cool graphic
What a shame!, the tricks are so toxic for skateboards and people. I preffer avoid all not necessary tricks, is the most intelligent decission. But, over all, congratullations for your work.
The original idea behind this video is that you buy a skateboard not make them.
ι wanт one😭
DIY?
can you make me a skateboard deck
As soon as i seen the wood, i knew it wasn't going to last that long.
why?
it's made of hard rock maple
+Grhaesyn McNabb the veneer they used looked like trash
+NickMcClain ._. ah ok
Beware, the quality of faboards is terrible and the support is leaving you with more cost. Many other good esk8 are out there.
2:18 poor quality
Who got some extra skateboard? Cant afford 1😭🥺
what type of wood did you use?
its called veneers they are thin strips of wood...you would layer them together to make the board
Rush Gaming I know it's veneers I'm just curious on what wood species they used because it broke on the hardflip
im pretty sure they used maple
Did they criss cross grain pattern when laying the veneer?
How long did that board last?
+Edward Soto just for a couple hours ^^
Oh dang
what wood is this?
Maple
+Gabe Skates that doesnt look like maple