At GM we have our "4-20" devices setup as 3.5 ma - 20.5 ma. The reason being is that various faults with the input can be sent to the PLC as either a 3.5 ma or a 20.5 ma signal. Of course if your input device doesn't provide this feature then it's pointless to accommodate for it. But it would create a fault on a sensor failure for example.
BOOL can only be a 0 or a 1 so it is not an analog signal. We talk about REALs vs DINTs at twcontrols.com/lessons/difference-between-a-real-and-integer-numbers-when-rounding
Hello sir, Is it possible to migrate a hmi panelview c400 to hmi panelview800 using ccw without changing any tags in perfect manner Please suggest a easy way
Boa noite eu me chamo Elciney, sou do Brasil, mais precisamente da Amazônia, na verdade eu gostaria de saber se você tem algum curso que você possa me vender de CLP MICRO 850, IHM PV800 e POWER FLEX 525, sendo que esse curso teria que ser voltado ou teria que ser a ihm comando a velocidade do power flex e o clp monitorando todos os dois.
Thanks for your tutorials Tim.
You are welcome!
At GM we have our "4-20" devices setup as 3.5 ma - 20.5 ma. The reason being is that various faults with the input can be sent to the PLC as either a 3.5 ma or a 20.5 ma signal. Of course if your input device doesn't provide this feature then it's pointless to accommodate for it. But it would create a fault on a sensor failure for example.
Yes, one of the lesson in the series I touch on that but I should probably go into detail on that.
Does the scaling 4-20mA analog signal requires conversion depending either it is real, bool or any datatype
BOOL can only be a 0 or a 1 so it is not an analog signal. We talk about REALs vs DINTs at twcontrols.com/lessons/difference-between-a-real-and-integer-numbers-when-rounding
I love your channel!❤
You are so kind!
Hello sir, Is it possible to migrate a hmi panelview c400 to hmi panelview800 using ccw without changing any tags in perfect manner
Please suggest a easy way
Don't know, I was never a fan of the Panelview Component.
Throw it out. Buy a Maple.
Boa noite eu me chamo Elciney, sou do Brasil, mais precisamente da Amazônia, na verdade eu gostaria de saber se você tem algum curso que você possa me vender de CLP MICRO 850, IHM PV800 e POWER FLEX 525, sendo que esse curso teria que ser voltado ou teria que ser a ihm comando a velocidade do power flex e o clp monitorando todos os dois.
See links below.
twcontrols.com/micro800-connected-components-workbench-lessons
twcontrols.com/allen-bradley-panelview-lessons
twcontrols.com/ac-drives-and-3-phase-motors
hello guys, I need support to configure FGEN function block (reason control)