You can purchase the gear here www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=Ford+Automatic+Transmission+Speedometer+Driven+Gear&_sacat=0&LH_TitleDesc=0&_odkw=New+Genuine+Ford+Automatic+Transmission+Speedometer+Driven+Gear+OE+C8SZ17271B&_osacat=0&mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338081398&customid=&toolid=10001&mkevt=1
I just changed mine...I have the 4r100 trans..much tighter space to get to it. Did not have to jack up vehicle..just laid on my back...crawled under and have to get it from drivers side. Removed screw did what you did , pretty simple..just lined up the screw opening pushed in trans ..tightened screw and plugged connected in .done. your hands Williams get a little dirty..but that's about it.
I see a plug in sensor on the rear axle transfer case I believe. (I’m learning my truck and not always right with names/terms) is that what I’m looking for?
What do you mean by a plug in sensor? Are you looking at the rear diff? That is not where this sensor is, it is on the transmission in the middle of the truck.
What i meant was it stops from the rubber seal then it pops in fast once you overcome that resistance. Its kinda like a pop but not really. Sorry for the confusion. Push it in and put the bolt and should be no issues.
Hello this looks to be from about 3 years ago but i have a 2004 f150 5,4 l and when i put it in drive its like netural but sometimes it will catch when the RPM is high and slam into geat but usually i drop it into 2nd and roll a little then back to drive and its good till i slow down and it does it again and it may do it a little in 2nd once in a while, any idea ?
I didn't know speed sensor had a gear. I thought it was just the round circular surface. Didn't know a gear suppossed to be attached to speed sensor. Maybe thats why when i changed my sensor my truck still wouldn't go in drive. Possibly because i didn't put on the gear. Tell me; where can you purchase a gear? I have 02 F150.
My issue was the cluster. It had damaged connections where the wire connector plugs in. I have another video where I took the cluster apart. Eventually I bought another cluster from the junk yard. ua-cam.com/video/DiwLlAf8yA4/v-deo.html ua-cam.com/video/LKjJt2yFXS0/v-deo.html
I changed it because my speedometer was having issues. The issue ended up being the cluster so I replaced it for nothing. No software change just reset the computer after changing it.
I want to know why you didn't clean that gear and put some transmission fluid on it and then put it on the new speed sensor that's what I call half-ass work
The gear was black on my 99 Ford F-150 and the end was chew up I order five new gears installed one made no difference I thought perhaps the assembly so I ordered a cluster with 107,000 install that still got no speedometer but it’s giving me error code for the speed sensor Any suggestions
You mean the gear on the sensor is getting chewed up? If it is then the gear that turns it must be damaged inside the tranny. Stupid they make it of plastic it should be a steel gear.
@@chriss4365you would think they would do that because if it was you that made the part you would want your craftsmanship to help so you have pleased customers which in the long run gives you more business .
I had a transfer case output seal leak that drained my trans fluid out. So I was having trouble with cold starts was getting a trans fault message with o/d light blinking
Do not know the part number but here they are www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=1997+f150+transmission+speed+sensor&_sacat=0&LH_TitleDesc=0&selcontext=productType%3ACAR_AND_TRUCK&_odkw=1997+f150+speed+sensor&_osacat=0&selvel=Year%3A1997%2CMake%3AFord%2CModel%3AF-150%2CTrim%3ABase%2BStandard%2BCab%2BPickup%2B2-Door%2CEngine%3A4.6L%2B281Cu.%2BIn.%2BV8%2BGAS%2BSOHC%2BNaturally%2BAspirated%2CSubmodel%3ABase%2CEngine+-+Liter_Display%3A4.6L&mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338081398&customid&toolid=10001&mkevt=1
I'm trying to order one for a 4R70W 2WD for a 1998 F-150, but it's asking how many teeth. Someone stole my whole sensor with the gear on it, so I have no idea. When I replaced the sensor, it didn't come with a new gear. My speedometer wasn't working after I rebuilt the transmission, didn't even know there was supposed to be a gear on the damn sensor until I saw this video. I think it's absolutely ridiculous that they don't send a new gear with the sensor.
right now my 01 f150 is having problem getting to speed and wont let me go into first or second without dying, when i did the scan, it pop up the speed sensor... would that be right?
I didn't know that the speed sensor had a gear. When i changed my sensor my truck still wouldn't go in drive. Maybe because it didn't have the gear attached to the sensor?
I doubt that was the issue the sensor just measures speed I'm sure it can work without it you just wont have a reading on the speedometer. Sorry for the late reply.
The 4r100 trans sensor in a tighter spot..take a flashlight it's right above black trans switch right side..look for it you'll see the side of part that looks like the turbine from the starship enterprise...you'll see the plug and it's right there ...will need a flashlight to see the 1 bolt..
You can purchase the gear here www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=Ford+Automatic+Transmission+Speedometer+Driven+Gear&_sacat=0&LH_TitleDesc=0&_odkw=New+Genuine+Ford+Automatic+Transmission+Speedometer+Driven+Gear+OE+C8SZ17271B&_osacat=0&mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338081398&customid=&toolid=10001&mkevt=1
I just changed mine...I have the 4r100 trans..much tighter space to get to it. Did not have to jack up vehicle..just laid on my back...crawled under and have to get it from drivers side. Removed screw did what you did , pretty simple..just lined up the screw opening pushed in trans ..tightened screw and plugged connected in .done. your hands Williams get a little dirty..but that's about it.
Good video. Clear, simple and complete. 👍
good job bruh ,nice and crisp vid.🙌🙌
I see a plug in sensor on the rear axle transfer case I believe. (I’m learning my truck and not always right with names/terms) is that what I’m looking for?
What do you mean by a plug in sensor? Are you looking at the rear diff? That is not where this sensor is, it is on the transmission in the middle of the truck.
thank you for you video it helped me a lot
I have a 1998 f-150 5 speed and I can’t figure out what gear I need just the one replacement would you happen to know what I need
www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=Ford+Automatic+Transmission+Speedometer+Driven+Gear&_sacat=0&LH_TitleDesc=0&_odkw=New+Genuine+Ford+Automatic+Transmission+Speedometer+Driven+Gear+OE+C8SZ17271B&_osacat=0&mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338081398&customid=&toolid=10001&mkevt=1
What if you don't hear it Click, when you push the sensor in ????
What i meant was it stops from the rubber seal then it pops in fast once you overcome that resistance. Its kinda like a pop but not really. Sorry for the confusion. Push it in and put the bolt and should be no issues.
Hello this looks to be from about 3 years ago but i have a 2004 f150 5,4 l and when i put it in drive its like netural but sometimes it will catch when the RPM is high and slam into geat but usually i drop it into 2nd and roll a little then back to drive and its good till i slow down and it does it again and it may do it a little in 2nd once in a while, any idea ?
Look at this video, doing this might fix your issue. ua-cam.com/users/shortspQGnwXmoL38
Thank you, helpful 👍
Jrasias muy amable de su parte joven jrasias 👌
I didn't know speed sensor had a gear. I thought it was just the round circular surface. Didn't know a gear suppossed to be attached to speed sensor. Maybe thats why when i changed my sensor my truck still wouldn't go in drive. Possibly because i didn't put on the gear. Tell me; where can you purchase a gear? I have 02 F150.
www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=Ford+Automatic+Transmission+Speedometer+Driven+Gear&_sacat=0&LH_TitleDesc=0&_odkw=New+Genuine+Ford+Automatic+Transmission+Speedometer+Driven+Gear+OE+C8SZ17271B&_osacat=0&mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338081398&customid=&toolid=10001&mkevt=1
My speedometer is working but the odometer works sometimes and sometimes it doesn’t. Could this be the same part I need to fix my issue?
The odometer is sticking Probably the motor hanging up. I talk about that in this video ua-cam.com/video/DiwLlAf8yA4/v-deo.html
Thx much
I changed this part on my 98 f150 and my speedometer still does work any idea what else it could be??
My issue was the cluster. It had damaged connections where the wire connector plugs in. I have another video where I took the cluster apart. Eventually I bought another cluster from the junk yard.
ua-cam.com/video/DiwLlAf8yA4/v-deo.html
ua-cam.com/video/LKjJt2yFXS0/v-deo.html
i’ve had mine unplugged since i got the truck but i can’t find the connector . From where does the cable run from
A wire harness that runs to the ecu.
Is this something you have to change when re-gearing or is it something else, or is it a software change?
I changed it because my speedometer was having issues. The issue ended up being the cluster so I replaced it for nothing. No software change just reset the computer after changing it.
I want to know why you didn't clean that gear and put some transmission fluid on it and then put it on the new speed sensor that's what I call half-ass work
I want to know why you didn't watch the entire video, that's what I call half-ass video watching.
The gear was black on my 99 Ford F-150 and the end was chew up I order five new gears installed one made no difference I thought perhaps the assembly so I ordered a cluster with 107,000 install that still got no speedometer but it’s giving me error code for the speed sensor Any suggestions
You mean the gear on the sensor is getting chewed up? If it is then the gear that turns it must be damaged inside the tranny. Stupid they make it of plastic it should be a steel gear.
@@chriss4365you would think they would do that because if it was you that made the part you would want your craftsmanship to help so you have pleased customers which in the long run gives you more business .
What were the symptoms to cause you to replace?
Issue with speedometer but the issue ended up being I had to manually move the needle on the speedometer to get correct speed.
I had a transfer case output seal leak that drained my trans fluid out. So I was having trouble with cold starts was getting a trans fault message with o/d light blinking
It eventually led to me getting a check engine light and once I went to auto zone to do the test the code p0720 came up suggesting to change this part
I still have to change it and the leak so I’m hoping that’s the fix when I get a chance
@@adrianmarquez237 Try at 205 reseal to restore the seal. I have a video about it here. ua-cam.com/video/D5Sqkf6X9EQ/v-deo.html
A 1997 & a 2004 ford don’t have the same transmission ?
It depends what engine you have. The 2004 year has a transition from one generation to another.
@@chriss4365 mines a 4.6L V8
What's the name of that part don't look like a speed sensor for a 2002 f150
Its a speed sensor
my truck is manual is the same sensor ??
I would think so.
What is the part # in this video?
Do not know the part number but here they are www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=1997+f150+transmission+speed+sensor&_sacat=0&LH_TitleDesc=0&selcontext=productType%3ACAR_AND_TRUCK&_odkw=1997+f150+speed+sensor&_osacat=0&selvel=Year%3A1997%2CMake%3AFord%2CModel%3AF-150%2CTrim%3ABase%2BStandard%2BCab%2BPickup%2B2-Door%2CEngine%3A4.6L%2B281Cu.%2BIn.%2BV8%2BGAS%2BSOHC%2BNaturally%2BAspirated%2CSubmodel%3ABase%2CEngine+-+Liter_Display%3A4.6L&mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338081398&customid&toolid=10001&mkevt=1
Did you get P0500 code when you had problem?
no, i changed it because the speedometer was wrong the issue ended up being the speedometer which I showed how I fixed it in another video.
Any idea where to get a replacement gear?
Ebay
Simple, buy OEM Ford instead of aftermarket
Man. I can't believe they don't include the plastic gear. Smh
I'm trying to order one for a 4R70W 2WD for a 1998 F-150, but it's asking how many teeth. Someone stole my whole sensor with the gear on it, so I have no idea. When I replaced the sensor, it didn't come with a new gear. My speedometer wasn't working after I rebuilt the transmission, didn't even know there was supposed to be a gear on the damn sensor until I saw this video. I think it's absolutely ridiculous that they don't send a new gear with the sensor.
@@jesseppers were you able to find one?
Is this automatic transmission?
yes
right now my 01 f150 is having problem getting to speed and wont let me go into first or second without dying, when i did the scan, it pop up the speed sensor... would that be right?
You mean is won't engage in drive?
Is this the vss?
Vss is the speed sensor.
Thank you
My truck shifts up fine slams back into 1st gear when I let foot of pedal
Hard shifting is from a solenoid responding slow. You should have the transmission checked and possibly rebuilt.
Could that part be the reason why my speedometer doesn't work at all? I have a 2004 Ford F150 Lariat
Yes and no.
You fix you speedometer?
I just bought 2004 Ford F-150 with the same problem speedometer don’t work
@@Gonzalez1981 might need a new gauge. I'd just replace the whole cluster.
I didn't know that the speed sensor had a gear. When i changed my sensor my truck still wouldn't go in drive. Maybe because it didn't have the gear attached to the sensor?
I doubt that was the issue the sensor just measures speed I'm sure it can work without it you just wont have a reading on the speedometer. Sorry for the late reply.
On a manual transmission it will work fine but the speedometer does not work I’m having the same problem
@@sithtony449 could be the motor that moves the needle or the board in the cluster is bad.
48
?
What tyranny is that?. I have a 4R100 on a 99 Ford Expedition XLT 4wd 5.4L
?
it looks like e40d,im working right now on e40d and it has the same sensor,4r100 has on top in front of transmission different type
The 4r100 trans sensor in a tighter spot..take a flashlight it's right above black trans switch right side..look for it you'll see the side of part that looks like the turbine from the starship enterprise...you'll see the plug and it's right there ...will need a flashlight to see the 1 bolt..
You will also need a short extension to reach bolt..with ratchet.